juhosg 56f15bb5f9 swconfig: Add cpu port index to help output. ... Let swconfig provide the cpu port index in its help page. This is needed as e.g. Atheros switches have their cpu port at port 0, not port 5. This could allow e.g. luci to get a rough overview of the layout of the switch. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20939 3c298f89-4303-0410-b956-a3cf2f4a3e73		2010-04-16 19:32:40 +00:00
..
adm6996.c	fix link status detection in various switch drivers	2009-12-08 14:06:09 +00:00
adm6996.h	Add stub driver for ADM6996F switches (configured through MII)	2008-04-20 02:53:04 +00:00
ar8216.c	Generic: Clean up output of AR8216 driver.	2010-04-10 11:34:11 +00:00
ar8216.h	[PATCH 1/2] Add support for the ar8316 switch.	2010-04-05 23:03:16 +00:00
ip175c.c	enable IP175A support in the IP175C PHY driver (based on patch from jh in #6733)	2010-03-28 18:57:42 +00:00
mvswitch.c	fix link status detection in various switch drivers	2009-12-08 14:06:09 +00:00
mvswitch.h	add missing defines for mvswitch	2008-07-21 18:12:38 +00:00
rtl8306.c	rtl8306: manage the wan port as a separate phy device with proper link status reading and autonegotiation - the genphy driver does not handle it properly	2009-12-09 03:25:33 +00:00
rtl8366_smi.c	rtl8366_smi: sanitize gpio values to a 0/1 boolean	2010-01-30 15:25:12 +00:00
rtl8366_smi.h	rtl8366: make it available on all platforms	2010-01-25 15:13:38 +00:00
rtl8366rb.c	kernel: add driver for the RTL8366RB switch	2010-02-24 13:39:02 +00:00
rtl8366s.c	rtl8366s: reset the chip early, this allows ethernet to work as soon as possible	2010-01-27 21:01:48 +00:00
swconfig.c	swconfig: Add cpu port index to help output.	2010-04-16 19:32:40 +00:00