mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-11 10:14:38 +02:00
fb16d85a72
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15254 3c298f89-4303-0410-b956-a3cf2f4a3e73
447 lines
11 KiB
C
447 lines
11 KiB
C
/*
|
|
* Broadcom BCM63xx SPI controller support
|
|
*
|
|
* Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the
|
|
* Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/spi_bitbang.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/err.h>
|
|
|
|
#include <bcm63xx_io.h>
|
|
#include <bcm63xx_regs.h>
|
|
#include <bcm63xx_dev_spi.h>
|
|
|
|
#define PFX KBUILD_MODNAME
|
|
#define DRV_VER "0.1.2"
|
|
|
|
struct bcm63xx_spi {
|
|
/* bitbang has to be first */
|
|
struct spi_bitbang bitbang;
|
|
struct completion done;
|
|
|
|
void __iomem *regs;
|
|
int irq;
|
|
|
|
/* Platform data */
|
|
u32 speed_hz;
|
|
unsigned fifo_size;
|
|
|
|
/* Data buffers */
|
|
const unsigned char *tx_ptr;
|
|
unsigned char *rx_ptr;
|
|
int remaining_bytes;
|
|
|
|
struct clk *clk;
|
|
struct resource *ioarea;
|
|
struct platform_device *pdev;
|
|
};
|
|
|
|
static void bcm63xx_spi_chipselect(struct spi_device *spi, int is_on)
|
|
{
|
|
struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
|
|
u16 val;
|
|
|
|
val = bcm_spi_readw(bs->regs, SPI_CMD);
|
|
if (is_on == BITBANG_CS_INACTIVE)
|
|
val |= SPI_CMD_NOOP;
|
|
else if (is_on == BITBANG_CS_ACTIVE)
|
|
val |= (1 << spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
|
|
|
|
bcm_spi_writew(val, bs->regs, SPI_CMD);
|
|
}
|
|
|
|
static int bcm63xx_spi_setup_transfer(struct spi_device *spi,
|
|
struct spi_transfer *t)
|
|
{
|
|
u8 bits_per_word;
|
|
u8 clk_cfg;
|
|
u32 hz;
|
|
unsigned int div;
|
|
|
|
struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
|
|
|
|
bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
|
|
hz = (t) ? t->speed_hz : spi->max_speed_hz;
|
|
if (bits_per_word != 8) {
|
|
dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
|
|
__func__, bits_per_word);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (spi->chip_select > spi->master->num_chipselect) {
|
|
dev_err(&spi->dev, "%s, unsupported slave %d\n",
|
|
__func__, spi->chip_select);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Check clock setting */
|
|
div = (bs->speed_hz / hz);
|
|
switch (div) {
|
|
case 2:
|
|
clk_cfg = SPI_CLK_25MHZ;
|
|
break;
|
|
case 4:
|
|
clk_cfg = SPI_CLK_12_50MHZ;
|
|
break;
|
|
case 8:
|
|
clk_cfg = SPI_CLK_6_250MHZ;
|
|
break;
|
|
case 16:
|
|
clk_cfg = SPI_CLK_3_125MHZ;
|
|
break;
|
|
case 32:
|
|
clk_cfg = SPI_CLK_1_563MHZ;
|
|
break;
|
|
case 128:
|
|
clk_cfg = SPI_CLK_0_781MHZ;
|
|
break;
|
|
case 64:
|
|
default:
|
|
/* Set to slowest mode for compatibility */
|
|
clk_cfg = SPI_CLK_0_781MHZ;
|
|
break;
|
|
}
|
|
|
|
bcm_spi_writeb(clk_cfg, bs->regs, SPI_CLK_CFG);
|
|
dev_dbg(&spi->dev, "Setting clock register to %d (hz %d, cmd %02x)\n",
|
|
div, hz, clk_cfg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* the spi->mode bits understood by this driver: */
|
|
#define MODEBITS (SPI_CPOL | SPI_CPHA)
|
|
|
|
static int bcm63xx_spi_setup(struct spi_device *spi)
|
|
{
|
|
struct spi_bitbang *bitbang;
|
|
struct bcm63xx_spi *bs;
|
|
int retval;
|
|
|
|
bs = spi_master_get_devdata(spi->master);
|
|
bitbang = &bs->bitbang;
|
|
|
|
if (!spi->bits_per_word)
|
|
spi->bits_per_word = 8;
|
|
|
|
if (spi->mode & ~MODEBITS) {
|
|
dev_err(&spi->dev, "%s, unsupported mode bits %x\n",
|
|
__func__, spi->mode & ~MODEBITS);
|
|
return -EINVAL;
|
|
}
|
|
|
|
retval = bcm63xx_spi_setup_transfer(spi, NULL);
|
|
if (retval < 0) {
|
|
dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
|
|
spi->mode & ~MODEBITS);
|
|
return retval;
|
|
}
|
|
|
|
dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
|
|
__func__, spi->mode & MODEBITS, spi->bits_per_word, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Fill the TX FIFO with as many bytes as possible */
|
|
static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs)
|
|
{
|
|
u8 tail;
|
|
|
|
/* Fill the Tx FIFO with as many bytes as possible */
|
|
tail = bcm_spi_readb(bs->regs, SPI_MSG_TAIL);
|
|
while ((tail < bs->fifo_size) && (bs->remaining_bytes > 0)) {
|
|
if (bs->tx_ptr)
|
|
bcm_spi_writeb(*bs->tx_ptr++, bs->regs, SPI_MSG_DATA);
|
|
else
|
|
bcm_spi_writeb(0, bs->regs, SPI_MSG_DATA);
|
|
bs->remaining_bytes--;
|
|
tail = bcm_spi_readb(bs->regs, SPI_MSG_TAIL);
|
|
}
|
|
}
|
|
|
|
static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
|
|
{
|
|
struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
|
|
u8 msg_ctl;
|
|
u16 cmd;
|
|
|
|
dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
|
|
t->tx_buf, t->rx_buf, t->len);
|
|
|
|
/* Transmitter is inhibited */
|
|
bs->tx_ptr = t->tx_buf;
|
|
bs->rx_ptr = t->rx_buf;
|
|
bs->remaining_bytes = t->len;
|
|
init_completion(&bs->done);
|
|
|
|
bcm63xx_spi_fill_tx_fifo(bs);
|
|
|
|
/* Enable the command done interrupt which
|
|
* we use to determine completion of a command */
|
|
bcm_spi_writeb(SPI_INTR_CMD_DONE, bs->regs, SPI_INT_MASK);
|
|
|
|
/* Fill in the Message control register */
|
|
msg_ctl = bcm_spi_readb(bs->regs, SPI_MSG_CTL);
|
|
msg_ctl |= (t->len << SPI_BYTE_CNT_SHIFT);
|
|
msg_ctl |= (SPI_FD_RW << SPI_MSG_TYPE_SHIFT);
|
|
bcm_spi_writeb(msg_ctl, bs->regs, SPI_MSG_CTL);
|
|
|
|
/* Issue the transfer */
|
|
cmd = bcm_spi_readb(bs->regs, SPI_CMD);
|
|
cmd |= SPI_CMD_START_IMMEDIATE;
|
|
cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
|
|
bcm_spi_writeb(cmd, bs->regs, SPI_CMD);
|
|
|
|
wait_for_completion(&bs->done);
|
|
|
|
/* Disable the CMD_DONE interrupt */
|
|
bcm_spi_writeb(~(SPI_INTR_CMD_DONE), bs->regs, SPI_INT_MASK);
|
|
|
|
return t->len - bs->remaining_bytes;
|
|
}
|
|
|
|
/* This driver supports single master mode only. Hence
|
|
* CMD_DONE is the only interrupt we care about
|
|
*/
|
|
static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct spi_master *master = (struct spi_master *)dev_id;
|
|
struct bcm63xx_spi *bs = spi_master_get_devdata(master);
|
|
u8 intr;
|
|
u16 cmd;
|
|
|
|
/* Read interupts and clear them immediately */
|
|
intr = bcm_spi_readb(bs->regs, SPI_INT_STATUS);
|
|
bcm_spi_writeb(SPI_INTR_CLEAR_ALL, bs->regs, SPI_INT_STATUS);
|
|
|
|
/* A tansfer completed */
|
|
if (intr & SPI_INTR_CMD_DONE) {
|
|
u8 rx_empty;
|
|
|
|
rx_empty = bcm_spi_readb(bs->regs, SPI_ST);
|
|
/* Read out all the data */
|
|
while ((rx_empty & SPI_RX_EMPTY) == 0) {
|
|
u8 data;
|
|
|
|
data = bcm_spi_readb(bs->regs, SPI_RX_DATA);
|
|
if (bs->rx_ptr)
|
|
*bs->rx_ptr++ = data;
|
|
|
|
rx_empty = bcm_spi_readb(bs->regs, SPI_RX_EMPTY);
|
|
}
|
|
|
|
/* See if there is more data to send */
|
|
if (bs->remaining_bytes > 0) {
|
|
bcm63xx_spi_fill_tx_fifo(bs);
|
|
|
|
/* Start the transfer */
|
|
cmd = bcm_spi_readb(bs->regs, SPI_CMD);
|
|
cmd |= SPI_CMD_START_IMMEDIATE;
|
|
cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
|
|
bcm_spi_writeb(cmd, bs->regs, SPI_CMD);
|
|
} else
|
|
complete(&bs->done);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
|
|
static int __init bcm63xx_spi_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *r;
|
|
struct bcm63xx_spi_pdata *pdata = pdev->dev.platform_data;
|
|
int irq;
|
|
struct spi_master *master;
|
|
struct clk *clk;
|
|
struct bcm63xx_spi *bs;
|
|
int ret;
|
|
|
|
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!r) {
|
|
ret = -ENXIO;
|
|
goto out;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
ret = -ENXIO;
|
|
goto out;
|
|
}
|
|
|
|
clk = clk_get(&pdev->dev, "spi");
|
|
if (IS_ERR(clk)) {
|
|
dev_err(&pdev->dev, "No clock for device\n");
|
|
ret = -ENODEV;
|
|
goto out;
|
|
}
|
|
|
|
master = spi_alloc_master(&pdev->dev, sizeof(struct bcm63xx_spi));
|
|
if (!master) {
|
|
ret = -ENOMEM;
|
|
goto out_free;
|
|
}
|
|
|
|
bs = spi_master_get_devdata(master);
|
|
bs->bitbang.master = spi_master_get(master);
|
|
bs->bitbang.chipselect = bcm63xx_spi_chipselect;
|
|
bs->bitbang.setup_transfer = bcm63xx_spi_setup_transfer;
|
|
bs->bitbang.txrx_bufs = bcm63xx_txrx_bufs;
|
|
bs->bitbang.master->setup = bcm63xx_spi_setup;
|
|
init_completion(&bs->done);
|
|
|
|
platform_set_drvdata(pdev, master);
|
|
bs->pdev = pdev;
|
|
|
|
if (!request_mem_region(r->start,
|
|
r->end - r->start, PFX)) {
|
|
ret = -ENXIO;
|
|
goto out_free;
|
|
}
|
|
|
|
bs->regs = ioremap_nocache(r->start, r->end - r->start);
|
|
if (!bs->regs) {
|
|
printk(KERN_ERR PFX " unable to ioremap regs\n");
|
|
ret = -ENOMEM;
|
|
goto out_free;
|
|
}
|
|
bs->irq = irq;
|
|
bs->clk = clk;
|
|
bs->fifo_size = pdata->fifo_size;
|
|
|
|
ret = request_irq(irq, bcm63xx_spi_interrupt, 0,
|
|
pdev->dev.bus_id, master);
|
|
if (ret) {
|
|
printk(KERN_ERR PFX " unable to request irq\n");
|
|
goto out_unmap;
|
|
}
|
|
|
|
master->bus_num = pdata->bus_num;
|
|
master->num_chipselect = pdata->num_chipselect;
|
|
bs->speed_hz = pdata->speed_hz;
|
|
|
|
/* Initialize hardware */
|
|
clk_enable(bs->clk);
|
|
bcm_spi_writew(SPI_CMD_HARD_RESET, bs->regs, SPI_CMD);
|
|
bcm_spi_writeb(SPI_INTR_CLEAR_ALL, bs->regs, SPI_INT_MASK);
|
|
|
|
dev_info(&pdev->dev, " at 0x%08x (irq %d, FIFOs size %d) v%s\n",
|
|
r->start, irq, bs->fifo_size, DRV_VER);
|
|
|
|
ret = spi_bitbang_start(&bs->bitbang);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "spi_bitbang_start FAILED\n");
|
|
goto out_reset_hw;
|
|
}
|
|
|
|
return ret;
|
|
|
|
out_reset_hw:
|
|
clk_disable(clk);
|
|
free_irq(irq, master);
|
|
out_unmap:
|
|
iounmap(bs->regs);
|
|
out_free:
|
|
clk_put(clk);
|
|
spi_master_put(master);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int __exit bcm63xx_spi_remove(struct platform_device *pdev)
|
|
{
|
|
struct spi_master *master = platform_get_drvdata(pdev);
|
|
struct bcm63xx_spi *bs = spi_master_get_devdata(master);
|
|
|
|
spi_bitbang_stop(&bs->bitbang);
|
|
clk_disable(bs->clk);
|
|
clk_put(bs->clk);
|
|
free_irq(bs->irq, master);
|
|
iounmap(bs->regs);
|
|
platform_set_drvdata(pdev, 0);
|
|
spi_master_put(bs->bitbang.master);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int bcm63xx_spi_suspend(struct platform_device *pdev, pm_message_t mesg)
|
|
{
|
|
struct spi_master *master = platform_get_drvdata(pdev);
|
|
struct bcm63xx_spi *bs = spi_master_get_devdata(master);
|
|
|
|
clk_disable(bs->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm63xx_spi_resume(struct platform_device *pdev)
|
|
{
|
|
struct bcm63xx_spi *bs = spi_master_get_devdata(master);
|
|
struct bcm63xx_spi *bs = spi_master_get_devdata(master);
|
|
|
|
clk_enable(bs->clk);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#define bcm63xx_spi_suspend NULL
|
|
#define bcm63xx_spi_resume NULL
|
|
#endif
|
|
|
|
static struct platform_driver bcm63xx_spi_driver = {
|
|
.driver = {
|
|
.name = "bcm63xx-spi",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = bcm63xx_spi_probe,
|
|
.remove = bcm63xx_spi_remove,
|
|
.suspend = bcm63xx_spi_suspend,
|
|
.resume = bcm63xx_spi_resume,
|
|
};
|
|
|
|
|
|
static int __init bcm63xx_spi_init(void)
|
|
{
|
|
return platform_driver_register(&bcm63xx_spi_driver);
|
|
}
|
|
|
|
static void __exit bcm63xx_spi_exit(void)
|
|
{
|
|
platform_driver_unregister(&bcm63xx_spi_driver);
|
|
}
|
|
|
|
module_init(bcm63xx_spi_init);
|
|
module_exit(bcm63xx_spi_exit);
|
|
|
|
MODULE_ALIAS("platform:bcm63xx_spi");
|
|
MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
|
|
MODULE_DESCRIPTION("Broadcom BCM63xx SPI Controller driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(DRV_VER);
|