1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-25 01:24:04 +02:00
openwrt-xburst/target/linux/xburst/patches-2.6.31/050-nand.patch
2009-10-28 03:13:30 +08:00

69 lines
2.1 KiB
Diff

--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -452,4 +452,10 @@ config MTD_NAND_SOCRATES
help
Enables support for NAND Flash chips wired onto Socrates board.
+config MTD_NAND_JZ4740
+ tristate "Support NAND Flash device on Jz4740 board"
+ depends on SOC_JZ4740
+ help
+ Support NAND Flash device on Jz4740 board
+
endif # MTD_NAND
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -40,5 +40,6 @@ obj-$(CONFIG_MTD_NAND_SH_FLCTL) += sh_f
obj-$(CONFIG_MTD_NAND_MXC) += mxc_nand.o
obj-$(CONFIG_MTD_NAND_SOCRATES) += socrates_nand.o
obj-$(CONFIG_MTD_NAND_TXX9NDFMC) += txx9ndfmc.o
+obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
nand-objs := nand_base.o nand_bbt.o
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -953,29 +953,22 @@ static int nand_read_page_hwecc(struct m
uint8_t *ecc_calc = chip->buffers->ecccalc;
uint8_t *ecc_code = chip->buffers->ecccode;
uint32_t *eccpos = chip->ecc.layout->eccpos;
-
- for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
- chip->ecc.hwctl(mtd, NAND_ECC_READ);
- chip->read_buf(mtd, p, eccsize);
- chip->ecc.calculate(mtd, p, &ecc_calc[i]);
- }
- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+ int stat;
for (i = 0; i < chip->ecc.total; i++)
ecc_code[i] = chip->oob_poi[eccpos[i]];
- eccsteps = chip->ecc.steps;
- p = buf;
-
- for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
- int stat;
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ chip->ecc.hwctl(mtd, NAND_ECC_READ);
+ chip->read_buf(mtd, p, eccsize);
stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
if (stat < 0)
mtd->ecc_stats.failed++;
else
mtd->ecc_stats.corrected += stat;
}
+
return 0;
}
@@ -1125,6 +1118,8 @@ static int nand_do_read_ops(struct mtd_i
bufpoi = aligned ? buf : chip->buffers->databuf;
if (likely(sndcmd)) {
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0x00, page);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
sndcmd = 0;
}