1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-24 07:01:44 +02:00
openwrt-xburst/package/uboot-ifxmips/files/board/ifx/danube/danube.c
thl 09b96811e8 [ifxmips] cleanup uboot package
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13291 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-11-19 17:40:05 +00:00

209 lines
4.7 KiB
C

/*
* (C) Copyright 2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <command.h>
#include <asm/addrspace.h>
#include <asm/danube.h>
#ifdef DANUBE_USE_DDR_RAM
long int initdram(int board_type)
{
return (1024*1024*DANUBE_DDR_RAM_SIZE);
}
#else
extern uint danube_get_cpuclk(void);
static ulong max_sdram_size(void) /* per Chip Select */
{
/* The only supported SDRAM data width is 16bit.
*/
#define CFG_DW 4
/* The only supported number of SDRAM banks is 4.
*/
#define CFG_NB 4
ulong cfgpb0 = *DANUBE_SDRAM_MC_CFGPB0;
int cols = cfgpb0 & 0xF;
int rows = (cfgpb0 & 0xF0) >> 4;
ulong size = (1 << (rows + cols)) * CFG_DW * CFG_NB;
return size;
}
/*
* Check memory range for valid RAM. A simple memory test determines
* the actually available RAM size between addresses `base' and
* `base + maxsize'.
*/
static long int dram_size(long int *base, long int maxsize)
{
volatile long int *addr;
ulong cnt, val;
ulong save[32]; /* to make test non-destructive */
unsigned char i = 0;
for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) {
addr = base + cnt; /* pointer arith! */
save[i++] = *addr;
*addr = ~cnt;
}
/* write 0 to base address */
addr = base;
save[i] = *addr;
*addr = 0;
/* check at base address */
if ((val = *addr) != 0) {
*addr = save[i];
return (0);
}
for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) {
addr = base + cnt; /* pointer arith! */
val = *addr;
*addr = save[--i];
if (val != (~cnt)) {
return (cnt * sizeof (long));
}
}
return (maxsize);
}
long int initdram(int board_type)
{
int rows, cols, best_val = *DANUBE_SDRAM_MC_CFGPB0;
ulong size, max_size = 0;
ulong our_address;
/* load t9 into our_address */
asm volatile ("move %0, $25" : "=r" (our_address) :);
/* Can't probe for RAM size unless we are running from Flash.
* find out whether running from DRAM or Flash.
*/
if (PHYSADDR(our_address) < PHYSADDR(PHYS_FLASH_1))
{
return max_sdram_size();
}
for (cols = 0x8; cols <= 0xC; cols++)
{
for (rows = 0xB; rows <= 0xD; rows++)
{
*DANUBE_SDRAM_MC_CFGPB0 = (0x14 << 8) |
(rows << 4) | cols;
size = dram_size((ulong *)CFG_SDRAM_BASE,
max_sdram_size());
if (size > max_size)
{
best_val = *DANUBE_SDRAM_MC_CFGPB0;
max_size = size;
}
}
}
*DANUBE_SDRAM_MC_CFGPB0 = best_val;
return max_size;
}
#endif
int checkboard (void)
{
/* No such register in Amazon */
#if 0
unsigned long chipid = *AMAZON_MCD_CHIPID;
int part_num;
puts ("Board: AMAZON ");
part_num = AMAZON_MCD_CHIPID_PART_NUMBER_GET(chipid);
switch (part_num) {
case AMAZON_CHIPID_STANDARD:
printf ("Standard Version, ");
break;
case AMAZON_CHIPID_YANGTSE:
printf ("Yangtse Version, ");
break;
default:
printf ("Unknown Part Number 0x%x ", part_num);
break;
}
printf ("Chip V1.%ld, ", AMAZON_MCD_CHIPID_VERSION_GET(chipid));
printf("CPU Speed %d MHz\n", danube_get_cpuclk()/1000000);
#endif
return 0;
}
/*
* Disk On Chip (NAND) Millenium initialization.
* The NAND lives in the CS2* space
*/
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
extern void
nand_probe(ulong physadr);
#define AT91_SMARTMEDIA_BASE 0x40000000 /* physical address to access memory on NCS3 */
void
nand_init(void)
{
int devtype;
/* Configure EBU */
//TODO: should we keep this?
//Set GPIO23 to be Flash CS1;
*DANUBE_GPIO_P1_ALTSEL0 = *DANUBE_GPIO_P1_ALTSEL0 | (1<<7);
*DANUBE_GPIO_P1_ALTSEL1 = *DANUBE_GPIO_P1_ALTSEL1 & ~(1<<7);
*DANUBE_GPIO_P1_DIR = *DANUBE_GPIO_P1_DIR | (1<<7) ;
*DANUBE_GPIO_P1_OD = *DANUBE_GPIO_P1_OD | (1<<7) ;
*EBU_ADDR_SEL_1 = (NAND_BASE_ADDRESS&0x1fffff00)|0x31;
/* byte swap;minimum delay*/
*EBU_CON_1 = 0x40C155;
*EBU_NAND_CON = 0x000005F3;
/* Set bus signals to inactive */
NAND_READY_CLEAR;
NAND_CE_CLEAR;
nand_probe(NAND_BASE_ADDRESS);
//nand_probe(AT91_SMARTMEDIA_BASE);
}
#endif