mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-02 08:33:09 +02:00
10f03e0475
This patch adds 802.1Q VLAN support for the ADM6996M chip. The driver is loaded for both the FC and M model. It will detect which of the two chips is connected. The FC model is initialised, but no further functionality is offered. The PHY driver will always report "100 Mbit/s, link up", for both the M and FC models. This reflects the fact that the link between switch chip and Ethernet MAC is always on[1]. Further documentation can be found in the kernel's Documentation/networking/adm6996.txt Signed-of-By: Peter Lebbing <peter@digitalbrains.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26865 3c298f89-4303-0410-b956-a3cf2f4a3e73
163 lines
5.1 KiB
C
163 lines
5.1 KiB
C
/*
|
|
* ADM6996 switch driver
|
|
*
|
|
* Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org>
|
|
* Copyright (c) 2010,2011 Peter Lebbing <peter@digitalbrains.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License v2 as published by the
|
|
* Free Software Foundation
|
|
*/
|
|
#ifndef __ADM6996_H
|
|
#define __ADM6996_H
|
|
|
|
/*
|
|
* ADM_PHY_PORTS: Number of ports with a PHY.
|
|
* We only control ports 0 to 3, because if 4 is connected, it is most likely
|
|
* not connected to the switch but to a separate MII and MAC for the WAN port.
|
|
*/
|
|
#define ADM_PHY_PORTS 4
|
|
#define ADM_NUM_PORTS 6
|
|
#define ADM_CPU_PORT 5
|
|
|
|
#define ADM_NUM_VLANS 16
|
|
#define ADM_VLAN_MAX_ID 4094
|
|
|
|
enum admreg {
|
|
ADM_EEPROM_BASE = 0x0,
|
|
ADM_P0_CFG = ADM_EEPROM_BASE + 1,
|
|
ADM_P1_CFG = ADM_EEPROM_BASE + 3,
|
|
ADM_P2_CFG = ADM_EEPROM_BASE + 5,
|
|
ADM_P3_CFG = ADM_EEPROM_BASE + 7,
|
|
ADM_P4_CFG = ADM_EEPROM_BASE + 8,
|
|
ADM_P5_CFG = ADM_EEPROM_BASE + 9,
|
|
ADM_SYSC0 = ADM_EEPROM_BASE + 0xa,
|
|
ADM_VLAN_PRIOMAP = ADM_EEPROM_BASE + 0xe,
|
|
ADM_SYSC3 = ADM_EEPROM_BASE + 0x11,
|
|
/* Input Force No Tag Enable */
|
|
ADM_IFNTE = ADM_EEPROM_BASE + 0x20,
|
|
ADM_VID_CHECK = ADM_EEPROM_BASE + 0x26,
|
|
ADM_P0_PVID = ADM_EEPROM_BASE + 0x28,
|
|
ADM_P1_PVID = ADM_EEPROM_BASE + 0x29,
|
|
/* Output Tag Bypass Enable and P2 PVID */
|
|
ADM_OTBE_P2_PVID = ADM_EEPROM_BASE + 0x2a,
|
|
ADM_P3_P4_PVID = ADM_EEPROM_BASE + 0x2b,
|
|
ADM_P5_PVID = ADM_EEPROM_BASE + 0x2c,
|
|
ADM_EEPROM_EXT_BASE = 0x40,
|
|
#define ADM_VLAN_FILT_L(n) (ADM_EEPROM_EXT_BASE + 2 * (n))
|
|
#define ADM_VLAN_FILT_H(n) (ADM_EEPROM_EXT_BASE + 1 + 2 * (n))
|
|
ADM_COUNTER_BASE = 0xa0,
|
|
ADM_SIG0 = ADM_COUNTER_BASE + 0,
|
|
ADM_SIG1 = ADM_COUNTER_BASE + 1,
|
|
ADM_PHY_BASE = 0x200,
|
|
#define ADM_PHY_PORT(n) (ADM_PHY_BASE + (0x20 * n))
|
|
};
|
|
|
|
/* Chip identification patterns */
|
|
#define ADM_SIG0_MASK 0xffff
|
|
#define ADM_SIG0_VAL 0x1023
|
|
#define ADM_SIG1_MASK 0xffff
|
|
#define ADM_SIG1_VAL 0x0007
|
|
|
|
enum {
|
|
ADM_PHYCFG_COLTST = (1 << 7), /* Enable collision test */
|
|
ADM_PHYCFG_DPLX = (1 << 8), /* Enable full duplex */
|
|
ADM_PHYCFG_ANEN_RST = (1 << 9), /* Restart auto negotiation (self clear) */
|
|
ADM_PHYCFG_ISO = (1 << 10), /* Isolate PHY */
|
|
ADM_PHYCFG_PDN = (1 << 11), /* Power down PHY */
|
|
ADM_PHYCFG_ANEN = (1 << 12), /* Enable auto negotiation */
|
|
ADM_PHYCFG_SPEED_100 = (1 << 13), /* Enable 100 Mbit/s */
|
|
ADM_PHYCFG_LPBK = (1 << 14), /* Enable loopback operation */
|
|
ADM_PHYCFG_RST = (1 << 15), /* Reset the port (self clear) */
|
|
ADM_PHYCFG_INIT = (
|
|
ADM_PHYCFG_RST |
|
|
ADM_PHYCFG_SPEED_100 |
|
|
ADM_PHYCFG_ANEN |
|
|
ADM_PHYCFG_ANEN_RST
|
|
)
|
|
};
|
|
|
|
enum {
|
|
ADM_PORTCFG_FC = (1 << 0), /* Enable 802.x flow control */
|
|
ADM_PORTCFG_AN = (1 << 1), /* Enable auto-negotiation */
|
|
ADM_PORTCFG_SPEED_100 = (1 << 2), /* Enable 100 Mbit/s */
|
|
ADM_PORTCFG_DPLX = (1 << 3), /* Enable full duplex */
|
|
ADM_PORTCFG_OT = (1 << 4), /* Output tagged packets */
|
|
ADM_PORTCFG_PD = (1 << 5), /* Port disable */
|
|
ADM_PORTCFG_TV_PRIO = (1 << 6), /* 0 = VLAN based priority
|
|
* 1 = TOS based priority */
|
|
ADM_PORTCFG_PPE = (1 << 7), /* Port based priority enable */
|
|
ADM_PORTCFG_PP_S = (1 << 8), /* Port based priority, 2 bits */
|
|
ADM_PORTCFG_PVID_BASE = (1 << 10), /* Primary VLAN id, 4 bits */
|
|
ADM_PORTCFG_FSE = (1 << 14), /* Fx select enable */
|
|
ADM_PORTCFG_CAM = (1 << 15), /* Crossover Auto MDIX */
|
|
|
|
ADM_PORTCFG_INIT = (
|
|
ADM_PORTCFG_FC |
|
|
ADM_PORTCFG_AN |
|
|
ADM_PORTCFG_SPEED_100 |
|
|
ADM_PORTCFG_DPLX |
|
|
ADM_PORTCFG_CAM
|
|
),
|
|
ADM_PORTCFG_CPU = (
|
|
ADM_PORTCFG_FC |
|
|
ADM_PORTCFG_SPEED_100 |
|
|
ADM_PORTCFG_OT |
|
|
ADM_PORTCFG_DPLX
|
|
),
|
|
};
|
|
|
|
#define ADM_PORTCFG_PPID(n) ((n & 0x3) << 8)
|
|
#define ADM_PORTCFG_PVID(n) ((n & 0xf) << 10)
|
|
#define ADM_PORTCFG_PVID_MASK (0xf << 10)
|
|
|
|
#define ADM_IFNTE_MASK (0x3f << 9)
|
|
#define ADM_VID_CHECK_MASK (0x3f << 6)
|
|
|
|
#define ADM_P0_PVID_VAL(n) ((((n) & 0xff0) >> 4) << 0)
|
|
#define ADM_P1_PVID_VAL(n) ((((n) & 0xff0) >> 4) << 0)
|
|
#define ADM_P2_PVID_VAL(n) ((((n) & 0xff0) >> 4) << 0)
|
|
#define ADM_P3_PVID_VAL(n) ((((n) & 0xff0) >> 4) << 0)
|
|
#define ADM_P4_PVID_VAL(n) ((((n) & 0xff0) >> 4) << 8)
|
|
#define ADM_P5_PVID_VAL(n) ((((n) & 0xff0) >> 4) << 0)
|
|
#define ADM_P2_PVID_MASK 0xff
|
|
|
|
#define ADM_OTBE(n) (((n) & 0x3f) << 8)
|
|
#define ADM_OTBE_MASK (0x3f << 8)
|
|
|
|
/* ADM_SYSC0 */
|
|
enum {
|
|
ADM_NTTE = (1 << 2), /* New Tag Transmit Enable */
|
|
ADM_RVID1 = (1 << 8) /* Replace VLAN ID 1 */
|
|
};
|
|
|
|
/* Tag Based VLAN in ADM_SYSC3 */
|
|
#define ADM_TBV (1 << 5)
|
|
|
|
static const u8 adm_portcfg[] = {
|
|
[0] = ADM_P0_CFG,
|
|
[1] = ADM_P1_CFG,
|
|
[2] = ADM_P2_CFG,
|
|
[3] = ADM_P3_CFG,
|
|
[4] = ADM_P4_CFG,
|
|
[5] = ADM_P5_CFG,
|
|
};
|
|
|
|
/* Fields in ADM_VLAN_FILT_L(x) */
|
|
#define ADM_VLAN_FILT_FID(n) (((n) & 0xf) << 12)
|
|
#define ADM_VLAN_FILT_TAGGED(n) (((n) & 0x3f) << 6)
|
|
#define ADM_VLAN_FILT_MEMBER(n) (((n) & 0x3f) << 0)
|
|
#define ADM_VLAN_FILT_MEMBER_MASK 0x3f
|
|
/* Fields in ADM_VLAN_FILT_H(x) */
|
|
#define ADM_VLAN_FILT_VALID (1 << 15)
|
|
#define ADM_VLAN_FILT_VID(n) (((n) & 0xfff) << 0)
|
|
|
|
|
|
/*
|
|
* Split the register address in phy id and register
|
|
* it will get combined again by the mdio bus op
|
|
*/
|
|
#define PHYADDR(_reg) ((_reg >> 5) & 0xff), (_reg & 0x1f)
|
|
|
|
#endif
|