qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-23 22:59:55 +02:00
Code
e2947f4ff3
openwrt-xburst/target/linux/xburst/patches-2.6.37/007-add-n526-board-support.patch
lars 12cb8e47f8 [xburst] Add 2.6.37 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24914 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-06 01:32:17 +00:00

359 lines
8.8 KiB
Diff
Raw Blame History

From 5739f1348052000ed12a7745f7bafd352fff832a Mon Sep 17 00:00:00 2001
From: Lars-Peter Clausen <lars@metafoo.de>
Date: Sat, 24 Apr 2010 17:25:23 +0200
Subject: [PATCH 07/23] Add n526 board support
---
arch/mips/jz4740/Kconfig | 4 +
arch/mips/jz4740/Makefile | 1 +
arch/mips/jz4740/board-n526.c | 318 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 323 insertions(+), 0 deletions(-)
create mode 100644 arch/mips/jz4740/board-n526.c
--- a/arch/mips/jz4740/Kconfig
+++ b/arch/mips/jz4740/Kconfig
@@ -10,6 +10,10 @@ config JZ4740_N516
bool "Hanvon n516 eBook reader"
select SOC_JZ4740
+config JZ4740_N526
+ bool "Hanvon n526 eBook reader"
+ select SOC_JZ4740
+
endchoice
config HAVE_PWM
--- a/arch/mips/jz4740/Makefile
+++ b/arch/mips/jz4740/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_DEBUG_FS) += clock-debugfs.
obj-$(CONFIG_JZ4740_QI_LB60) += board-qi_lb60.o
obj-$(CONFIG_JZ4740_N516) += board-n516.o board-n516-display.o
+obj-$(CONFIG_JZ4740_N526) += board-n526.o
# PM support
--- /dev/null
+++ b/arch/mips/jz4740/board-n526.c
@@ -0,0 +1,320 @@
+/*
+ * Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
+ * N526 eBook reader support
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <video/broadsheetfb.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#include <linux/leds.h>
+
+#include <linux/i2c.h>
+
+#include "clock.h"
+
+#include <asm/mach-jz4740/jz4740_mmc.h>
+#include <asm/mach-jz4740/jz4740_nand.h>
+#include <asm/mach-jz4740/jz4740_fb.h>
+
+#include <asm/mach-jz4740/platform.h>
+
+/* NAND */
+static struct nand_ecclayout n526_ecclayout = {
+ .eccbytes = 36,
+ .eccpos = {
+ 6, 7, 8, 9, 10, 11, 12, 13,
+ 14, 15, 16, 17, 18, 19, 20, 21,
+ 22, 23, 24, 25, 26, 27, 28, 29,
+ 30, 31, 32, 33, 34, 35, 36, 37,
+ 38, 39, 40, 41},
+ .oobfree = {
+ {
+ .offset = 2,
+ .length = 4,
+ },
+ {
+ .offset = 42,
+ .length = 22,
+ },
+ }
+};
+
+static struct mtd_partition n526_partitions[] = {
+ { .name = "NAND BOOT partition",
+ .offset = 0 * 0x100000,
+ .size = 4 * 0x100000,
+ },
+ { .name = "NAND KERNEL partition",
+ .offset = 4 * 0x100000,
+ .size = 4 * 0x100000,
+ },
+ { .name = "NAND ROOTFS partition",
+ .offset = 16 * 0x100000,
+ .size = 498 * 0x100000,
+ },
+};
+
+static struct jz_nand_platform_data n526_nand_pdata = {
+ .ecc_layout = &n526_ecclayout,
+ .partitions = n526_partitions,
+ .num_partitions = ARRAY_SIZE(n526_partitions),
+ .busy_gpio = JZ_GPIO_PORTC(30),
+};
+
+static struct jz4740_mmc_platform_data n526_mmc_pdata = {
+ .gpio_card_detect = JZ_GPIO_PORTD(7),
+ .card_detect_active_low = 1,
+ .gpio_read_only = -1,
+ .gpio_power = JZ_GPIO_PORTD(17),
+ .power_active_low = 1,
+};
+
+static struct gpio_led n526_leds[] = {
+ {
+ .name = "n526:blue:power",
+ .gpio = JZ_GPIO_PORTD(28),
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ }
+};
+
+static struct gpio_led_platform_data n526_leds_pdata = {
+ .leds = n526_leds,
+ .num_leds = ARRAY_SIZE(n526_leds),
+};
+
+static struct platform_device n526_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &n526_leds_pdata,
+ },
+};
+
+static void __init board_gpio_setup(void)
+{
+ /* We only need to enable/disable pullup here for pins used in generic
+ * drivers. Everything else is done by the drivers themselfs. */
+ jz_gpio_disable_pullup(JZ_GPIO_PORTD(17));
+ jz_gpio_enable_pullup(JZ_GPIO_PORTD(7));
+ jz_gpio_disable_pullup(JZ_GPIO_PORTC(19));
+ jz_gpio_disable_pullup(JZ_GPIO_PORTC(20));
+ jz_gpio_disable_pullup(JZ_GPIO_PORTC(21));
+ jz_gpio_disable_pullup(JZ_GPIO_PORTC(23));
+}
+
+
+static const int n526_eink_ctrl_gpios[] = {
+ 0,
+ JZ_GPIO_PORTC(23),
+ JZ_GPIO_PORTC(19),
+ JZ_GPIO_PORTC(20),
+};
+
+static void n526_eink_set_ctl(struct broadsheetfb_par * par, unsigned char ctrl, u8
+value)
+{
+ gpio_set_value(n526_eink_ctrl_gpios[ctrl], value);
+}
+
+
+static int n526_eink_wait(struct broadsheetfb_par *par)
+{
+ wait_event(par->waitq, gpio_get_value(JZ_GPIO_PORTB(17)));
+
+ return 0;
+}
+
+static u16 n526_eink_get_hdb(struct broadsheetfb_par *par)
+{
+ u16 value = 0;
+ jz_gpio_port_direction_input(JZ_GPIO_PORTC(0), 0xffff);
+ gpio_set_value(JZ_GPIO_PORTC(21), 0);
+ mdelay(100);
+
+ value = jz_gpio_port_get_value(JZ_GPIO_PORTC(0), 0xffff);
+
+ gpio_set_value(JZ_GPIO_PORTC(21), 1);
+ jz_gpio_port_direction_output(JZ_GPIO_PORTC(0), 0xffff);
+ return value;
+}
+
+static void n526_eink_set_hdb(struct broadsheetfb_par *par, u16 value)
+{
+ jz_gpio_port_set_value(JZ_GPIO_PORTC(0), value, 0xffff);
+}
+
+static int n526_eink_init(struct broadsheetfb_par *par)
+{
+ int i;
+
+ gpio_request(JZ_GPIO_PORTD(1), "display reset");
+ gpio_direction_output(JZ_GPIO_PORTD(1), 1);
+ mdelay(10);
+ gpio_set_value(JZ_GPIO_PORTD(1), 0);
+
+ gpio_request(JZ_GPIO_PORTB(18), "eink enable");
+ gpio_direction_output(JZ_GPIO_PORTB(18), 0);
+
+ gpio_request(JZ_GPIO_PORTB(29), "foobar");
+ gpio_direction_output(JZ_GPIO_PORTB(29), 1);
+
+ for(i = 1; i < ARRAY_SIZE(n526_eink_ctrl_gpios); ++i) {
+ gpio_request(n526_eink_ctrl_gpios[i], "eink display ctrl");
+ gpio_direction_output(n526_eink_ctrl_gpios[i], 0);
+ }
+
+ gpio_request(JZ_GPIO_PORTC(22), "foobar");
+ gpio_direction_input(JZ_GPIO_PORTC(22));
+ gpio_request(JZ_GPIO_PORTC(21), "eink nRD");
+ gpio_direction_output(JZ_GPIO_PORTC(21), 1);
+
+ for(i = 0; i < 16; ++i) {
+ gpio_request(JZ_GPIO_PORTC(i), "eink display data");
+ }
+ jz_gpio_port_direction_output(JZ_GPIO_PORTC(0), 0xffff);
+
+ gpio_set_value(JZ_GPIO_PORTB(18), 1);
+
+ return 0;
+}
+
+static irqreturn_t n526_eink_busy_irq(int irq, void *devid)
+{
+ struct broadsheetfb_par *par = devid;
+ wake_up(&par->waitq);
+
+ return IRQ_HANDLED;
+}
+
+static int n526_eink_setup_irq(struct fb_info *info)
+{
+ int ret;
+ struct broadsheetfb_par *par = info->par;
+
+ gpio_request(JZ_GPIO_PORTB(17), "eink busy");
+ gpio_direction_input(JZ_GPIO_PORTB(17));
+
+ ret = request_irq(gpio_to_irq(JZ_GPIO_PORTB(17)), n526_eink_busy_irq,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING,
+ "eink busyline", par);
+ if (ret)
+ printk("n526 display: Failed to request busyline irq: %d\n", ret);
+ return 0;
+}
+
+static void n526_eink_cleanup(struct broadsheetfb_par *par)
+{
+}
+
+static struct broadsheet_board broadsheet_pdata = {
+ .owner = THIS_MODULE,
+ .init = n526_eink_init,
+ .wait_for_rdy = n526_eink_wait,
+ .set_ctl = n526_eink_set_ctl,
+ .set_hdb = n526_eink_set_hdb,
+ .get_hdb = n526_eink_get_hdb,
+ .cleanup = n526_eink_cleanup,
+ .setup_irq = n526_eink_setup_irq,
+};
+
+static struct platform_device n526_broadsheet_device = {
+ .name = "broadsheetfb",
+ .id = -1,
+ .dev = {
+ .platform_data = &broadsheet_pdata,
+ },
+};
+
+/* Buttons */
+static struct gpio_keys_button n526_gpio_keys_buttons[] = {
+ [0] = {
+ .code = KEY_ENTER,
+ .gpio = 0,
+ .active_low = 1,
+ .desc = "Power",
+ },
+};
+
+static struct gpio_keys_platform_data n526_gpio_keys_data = {
+ .nbuttons = ARRAY_SIZE(n526_gpio_keys_buttons),
+ .buttons = n526_gpio_keys_buttons,
+};
+
+static struct platform_device n526_gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &n526_gpio_keys_data,
+ }
+};
+
+static struct i2c_board_info n526_i2c_board_info = {
+ .type = "n526-lpc",
+ .addr = 0x54,
+};
+
+static struct platform_device *n526_platform_devices[] __initdata = {
+ &jz4740_usb_ohci_device,
+ &jz4740_udc_device,
+ &jz4740_mmc_device,
+ &jz4740_nand_device,
+ &jz4740_i2s_device,
+ &jz4740_codec_device,
+ &jz4740_pcm_device,
+ &jz4740_rtc_device,
+ &jz4740_i2c_device,
+ &n526_leds_device,
+ &n526_broadsheet_device,
+ &n526_gpio_keys_device,
+};
+
+static int __init n526_init_platform_devices(void)
+{
+ jz4740_nand_device.dev.platform_data = &n526_nand_pdata;
+ jz4740_mmc_device.dev.platform_data = &n526_mmc_pdata;
+
+ jz4740_serial_device_register();
+
+ n526_i2c_board_info.irq = gpio_to_irq(JZ_GPIO_PORTD(14)),
+ i2c_register_board_info(0, &n526_i2c_board_info, 1);
+
+ return platform_add_devices(n526_platform_devices,
+ ARRAY_SIZE(n526_platform_devices));
+
+}
+
+struct jz4740_clock_board_data jz4740_clock_bdata = {
+ .ext_rate = 12000000,
+ .rtc_rate = 32768,
+};
+
+static int __init n526_board_setup(void)
+{
+ board_gpio_setup();
+
+ if (n526_init_platform_devices())
+ panic("Failed to initalize platform devices\n");
+
+ return 0;
+}
+arch_initcall(n526_board_setup);
View Git Blame Copy Permalink