1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-07 23:29:43 +02:00
openwrt-xburst/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g450h.c
nbd 75bbe95c04 ar71xx: register extra leds behind the wireless mac on wzr-hp-g450h
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29531 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:21:42 +00:00

174 lines
4.0 KiB
C

/*
* Buffalo WZR-HP-G450G board support
*
* Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org>
* Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include <asm/mach-ar71xx/gpio.h>
#include "machtype.h"
#include "devices.h"
#include "dev-m25p80.h"
#include "dev-ap91-pci.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-usb.h"
#define WZRHPG450H_KEYS_POLL_INTERVAL 20 /* msecs */
#define WZRHPG450H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG450H_KEYS_POLL_INTERVAL)
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition wzrhpg450h_partitions[] = {
{
.name = "u-boot",
.offset = 0,
.size = 0x0040000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "u-boot-env",
.offset = 0x0040000,
.size = 0x0010000,
}, {
.name = "ART",
.offset = 0x0050000,
.size = 0x0010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "uImage",
.offset = 0x0060000,
.size = 0x0100000,
}, {
.name = "rootfs",
.offset = 0x0160000,
.size = 0x1e80000,
}, {
.name = "user_property",
.offset = 0x1fe0000,
.size = 0x0020000,
}, {
.name = "firmware",
.offset = 0x0060000,
.size = 0x1f80000,
}
};
#endif /* CONFIG_MTD_PARTITIONS */
static struct flash_platform_data wzrhpg450h_flash_data = {
#ifdef CONFIG_MTD_PARTITIONS
.parts = wzrhpg450h_partitions,
.nr_parts = ARRAY_SIZE(wzrhpg450h_partitions),
#endif
};
static struct gpio_led wzrhpg450h_leds_gpio[] __initdata = {
{
.name = "buffalo:red:diag",
.gpio = 14,
.active_low = 1,
},
{
.name = "buffalo:orange:security",
.gpio = 13,
.active_low = 1,
},
};
static struct gpio_led wzrhpg450h_wmac_leds_gpio[] = {
{
.name = "buffalo:blue:movie_engine",
.gpio = 13,
.active_low = 1,
},
{
.name = "buffalo:green:router",
.gpio = 14,
.active_low = 1,
},
};
static struct gpio_keys_button wzrhpg450h_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
.gpio = 6,
.active_low = 1,
}, {
.desc = "usb",
.type = EV_KEY,
.code = BTN_2,
.debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
.gpio = 1,
.active_low = 1,
}, {
.desc = "aoss",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
.gpio = 8,
.active_low = 1,
}, {
.desc = "movie_engine",
.type = EV_KEY,
.code = BTN_6,
.debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
.gpio = 7,
.active_low = 0,
}, {
.desc = "router_off",
.type = EV_KEY,
.code = BTN_5,
.debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
.gpio = 12,
.active_low = 0,
}
};
static void __init wzrhpg450h_init(void)
{
u8 *ee = (u8 *) KSEG1ADDR(0x1f051000);
u8 *mac = (u8 *) ee + 2;
ar71xx_add_device_m25p80_multi(&wzrhpg450h_flash_data);
ar71xx_add_device_mdio(0, ~BIT(0));
ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth0_data.speed = SPEED_1000;
ar71xx_eth0_data.duplex = DUPLEX_FULL;
ar71xx_eth0_data.phy_mask = BIT(0);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpg450h_leds_gpio),
wzrhpg450h_leds_gpio);
ar71xx_register_gpio_keys_polled(-1, WZRHPG450H_KEYS_POLL_INTERVAL,
ARRAY_SIZE(wzrhpg450h_gpio_keys),
wzrhpg450h_gpio_keys);
ar71xx_add_device_eth(0);
ar71xx_add_device_usb();
gpio_request(16, "usb");
gpio_direction_output(16, 1);
ap91_pci_init(ee, NULL);
ap91_pci_setup_wmac_led_pin(15);
ap91_pci_setup_wmac_leds(wzrhpg450h_wmac_leds_gpio,
ARRAY_SIZE(wzrhpg450h_wmac_leds_gpio));
}
MIPS_MACHINE(AR71XX_MACH_WZR_HP_G450H, "WZR-HP-G450H", "Buffalo WZR-HP-G450H",
wzrhpg450h_init);