1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-25 15:23:10 +02:00
openwrt-xburst/target/linux/brcm63xx/patches-2.6.33/011-add_bcm63xx_ehci_controller.patch
florian 4d9258acb3 [brcm63xx] add support for 2.6.33
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19921 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 21:24:34 +00:00

179 lines
4.6 KiB
Diff

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
---
drivers/usb/host/ehci-bcm63xx.c | 154 +++++++++++++++++++++++++++++++++++++++
drivers/usb/host/ehci-hcd.c | 5 +
2 files changed, 159 insertions(+), 0 deletions(-)
create mode 100644 drivers/usb/host/ehci-bcm63xx.c
--- /dev/null
+++ b/drivers/usb/host/ehci-bcm63xx.c
@@ -0,0 +1,154 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+
+static int ehci_bcm63xx_setup(struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ int retval;
+
+ retval = ehci_halt(ehci);
+ if (retval)
+ return retval;
+
+ retval = ehci_init(hcd);
+ if (retval)
+ return retval;
+
+ ehci_reset(ehci);
+ ehci_port_power(ehci, 0);
+
+ return retval;
+}
+
+
+static const struct hc_driver ehci_bcm63xx_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "BCM63XX integrated EHCI controller",
+ .hcd_priv_size = sizeof(struct ehci_hcd),
+
+ .irq = ehci_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+
+ .reset = ehci_bcm63xx_setup,
+ .start = ehci_run,
+ .stop = ehci_stop,
+ .shutdown = ehci_shutdown,
+
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+
+ .get_frame_number = ehci_get_frame,
+
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
+};
+
+static int __devinit ehci_hcd_bcm63xx_drv_probe(struct platform_device *pdev)
+{
+ struct resource *res_mem;
+ struct usb_hcd *hcd;
+ struct ehci_hcd *ehci;
+ u32 reg;
+ int ret, irq;
+
+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ irq = platform_get_irq(pdev, 0);;
+ if (!res_mem || irq < 0)
+ return -ENODEV;
+
+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_REG);
+ reg &= ~USBH_PRIV_SWAP_EHCI_DATA_MASK;
+ reg |= USBH_PRIV_SWAP_EHCI_ENDN_MASK;
+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_REG);
+
+ /*
+ * The magic value comes for the original vendor BSP and is
+ * needed for USB to work. Datasheet does not help, so the
+ * magic value is used as-is.
+ */
+ bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, USBH_PRIV_TEST_REG);
+
+ hcd = usb_create_hcd(&ehci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx");
+ if (!hcd)
+ return -ENOMEM;
+ hcd->rsrc_start = res_mem->start;
+ hcd->rsrc_len = res_mem->end - res_mem->start + 1;
+
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+ pr_debug("request_mem_region failed\n");
+ ret = -EBUSY;
+ goto out;
+ }
+
+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ if (!hcd->regs) {
+ pr_debug("ioremap failed\n");
+ ret = -EIO;
+ goto out1;
+ }
+
+ ehci = hcd_to_ehci(hcd);
+ ehci->big_endian_mmio = 1;
+ ehci->big_endian_desc = 0;
+ ehci->caps = hcd->regs;
+ ehci->regs = hcd->regs +
+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+ ehci->sbrn = 0x20;
+
+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+ if (ret)
+ goto out2;
+
+ platform_set_drvdata(pdev, hcd);
+ return 0;
+
+out2:
+ iounmap(hcd->regs);
+out1:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+out:
+ usb_put_hcd(hcd);
+ return ret;
+}
+
+static int __devexit ehci_hcd_bcm63xx_drv_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd;
+
+ hcd = platform_get_drvdata(pdev);
+ usb_remove_hcd(hcd);
+ iounmap(hcd->regs);
+ usb_put_hcd(hcd);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ platform_set_drvdata(pdev, NULL);
+ return 0;
+}
+
+static struct platform_driver ehci_hcd_bcm63xx_driver = {
+ .probe = ehci_hcd_bcm63xx_drv_probe,
+ .remove = __devexit_p(ehci_hcd_bcm63xx_drv_remove),
+ .shutdown = usb_hcd_platform_shutdown,
+ .driver = {
+ .name = "bcm63xx_ehci",
+ .owner = THIS_MODULE,
+ },
+};
+
+MODULE_ALIAS("platform:bcm63xx_ehci");
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1158,6 +1158,11 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_atmel_driver
#endif
+#ifdef CONFIG_BCM63XX
+#include "ehci-bcm63xx.c"
+#define PLATFORM_DRIVER ehci_hcd_bcm63xx_driver
+#endif
+
#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
#error "missing bus glue for ehci-hcd"