1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-25 13:21:09 +02:00
openwrt-xburst/package/madwifi/patches/400-new_hal.patch
nbd 041ed57ae2 madwifi: delay calibration with a timer when called from becaon context
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15029 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-25 01:26:20 +00:00

125 lines
4.2 KiB
Diff

--- a/ath/if_ath.c
+++ b/ath/if_ath.c
@@ -606,6 +606,14 @@ ath_attach(u_int16_t devid, struct net_d
}
sc->sc_ah = ah;
+ /* WAR for AR7100 PCI bug */
+#ifdef CONFIG_ATHEROS_AR71XX
+ if ((ar_device(sc->devid) >= 5210) && (ar_device(sc->devid) < 5416)) {
+ ath_hal_setcapability(ah, HAL_CAP_DMABURST_RX, 0, HAL_DMABURST_4B, NULL);
+ ath_hal_setcapability(ah, HAL_CAP_DMABURST_TX, 0, HAL_DMABURST_4B, NULL);
+ }
+#endif
+
/*
* Check if the MAC has multi-rate retry support.
* We do this by trying to setup a fake extended
@@ -7555,7 +7563,7 @@ ath_txq_setup(struct ath_softc *sc, int
if (qtype == HAL_TX_QUEUE_UAPSD)
qi.tqi_qflags = HAL_TXQ_TXDESCINT_ENABLE;
else
- qi.tqi_qflags = HAL_TXQ_TXEOLINT_ENABLE |
+ qi.tqi_qflags = HAL_TXQ_TXEOLINT_ENABLE | HAL_TXQ_TXOKINT_ENABLE |
HAL_TXQ_TXDESCINT_ENABLE;
qnum = ath_hal_setuptxqueue(ah, qtype, &qi);
if (qnum == -1) {
--- a/ath_hal/ah_os.c
+++ b/ath_hal/ah_os.c
@@ -126,6 +126,13 @@ ath_hal_printf(struct ath_hal *ah, const
}
EXPORT_SYMBOL(ath_hal_printf);
+void __ahdecl
+ath_hal_printstr(struct ath_hal *ah, const char *str)
+{
+ printk("%s", str);
+}
+EXPORT_SYMBOL(ath_hal_printstr);
+
/*
* Format an Ethernet MAC for printing.
*/
--- a/ath_hal/ah_os.h
+++ b/ath_hal/ah_os.h
@@ -156,69 +156,23 @@ extern u_int32_t __ahdecl ath_hal_getupt
#endif
#endif /* AH_BYTE_ORDER */
-/*
- * Some big-endian architectures don't set CONFIG_GENERIC_IOMAP, but fail to
- * implement iowrite32be and ioread32be. Provide compatibility macros when
- * it's needed.
- *
- * As of Linux 2.6.24, only MIPS, PARISC and PowerPC implement iowrite32be and
- * ioread32be as functions.
- *
- * The downside or the replacement macros it that we may be byte-swapping data
- * for the second time, so the native implementations should be preferred.
- */
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,12)) && \
- !defined(CONFIG_GENERIC_IOMAP) && (AH_BYTE_ORDER == AH_BIG_ENDIAN) && \
- !defined(__mips__) && !defined(__hppa__) && !defined(__powerpc__)
-# ifndef iowrite32be
-# define iowrite32be(_val, _addr) iowrite32(swab32((_val)), (_addr))
-# endif
-# ifndef ioread32be
-# define ioread32be(_addr) swab32(ioread32((_addr)))
-# endif
-#endif
+#define IS_SWAPPED(_ah, _reg) \
+ ((_ah)->ah_swapped && \
+ (((0x4000 <= (_reg)) && ((_reg) < 0x5000)) || \
+ ((0x7000 <= (_reg)) && ((_reg) < 0x8000))))
+
+#define SWAPREG(_ah, _reg, _val) \
+ (IS_SWAPPED(_ah, _reg) ? cpu_to_le32(_val) : (_val))
/*
* The register accesses are done using target-specific functions when
* debugging is enabled (AH_DEBUG) or it's explicitly requested for the target.
- *
- * The hardware registers use little-endian byte order natively. Big-endian
- * systems are configured by HAL to enable hardware byte-swap of register reads
- * and writes at reset. This avoid the need to byte-swap the data in software.
- * However, the registers in a certain area from 0x4000 to 0x4fff (PCI clock
- * domain registers) are not byte swapped!
- *
- * Since Linux I/O primitives default to little-endian operations, we only
- * need to suppress byte-swapping on big-endian systems outside the area used
- * by the PCI clock domain registers.
*/
-#if (AH_BYTE_ORDER == AH_BIG_ENDIAN)
-#define is_reg_le(__reg) ((0x4000 <= (__reg) && (__reg) < 0x5000))
-#else
-#define is_reg_le(__reg) 1
-#endif
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,12)
-#define _OS_REG_WRITE(_ah, _reg, _val) do { \
- is_reg_le(_reg) ? \
- iowrite32((_val), (_ah)->ah_sh + (_reg)) : \
- iowrite32be((_val), (_ah)->ah_sh + (_reg)); \
- } while (0)
-#define _OS_REG_READ(_ah, _reg) \
- (is_reg_le(_reg) ? \
- ioread32((_ah)->ah_sh + (_reg)) : \
- ioread32be((_ah)->ah_sh + (_reg)))
-#else
#define _OS_REG_WRITE(_ah, _reg, _val) do { \
- writel(is_reg_le(_reg) ? \
- (_val) : cpu_to_le32(_val), \
- (_ah)->ah_sh + (_reg)); \
- } while (0)
+ __raw_writel(SWAPREG(_ah, _reg, _val), (_ah)->ah_sh + (_reg)); \
+} while (0)
#define _OS_REG_READ(_ah, _reg) \
- (is_reg_le(_reg) ? \
- readl((_ah)->ah_sh + (_reg)) : \
- cpu_to_le32(readl((_ah)->ah_sh + (_reg))))
-#endif /* KERNEL_VERSION(2,6,12) */
+ SWAPREG(_ah, _reg, __raw_readl((_ah)->ah_sh + (_reg)))
/*
* The functions in this section are not intended to be invoked by MadWifi