qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-09-03 18:48:05 +03:00
Code
e8923f5d9e
openwrt-xburst/package/mac80211/patches/300-pending_work.patch
nbd e8923f5d9e mac80211: update to wireless-testing 2012-02-27 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30746 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-27 22:56:05 +00:00

455 lines
16 KiB
Diff
Raw Blame History

--- a/drivers/net/wireless/ath/ath9k/ar9003_mac.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
@@ -510,7 +510,11 @@ int ath9k_hw_process_rxdesc_edma(struct
*/
if (rxsp->status11 & AR_CRCErr)
rxs->rs_status |= ATH9K_RXERR_CRC;
- else if (rxsp->status11 & AR_PHYErr) {
+ else if (rxsp->status11 & AR_DecryptCRCErr)
+ rxs->rs_status |= ATH9K_RXERR_DECRYPT;
+ else if (rxsp->status11 & AR_MichaelErr)
+ rxs->rs_status |= ATH9K_RXERR_MIC;
+ if (rxsp->status11 & AR_PHYErr) {
phyerr = MS(rxsp->status11, AR_PHYErrCode);
/*
* If we reach a point here where AR_PostDelimCRCErr is
@@ -532,11 +536,7 @@ int ath9k_hw_process_rxdesc_edma(struct
rxs->rs_status |= ATH9K_RXERR_PHY;
rxs->rs_phyerr = phyerr;
}
-
- } else if (rxsp->status11 & AR_DecryptCRCErr)
- rxs->rs_status |= ATH9K_RXERR_DECRYPT;
- else if (rxsp->status11 & AR_MichaelErr)
- rxs->rs_status |= ATH9K_RXERR_MIC;
+ };
}
if (rxsp->status11 & AR_KeyMiss)
--- a/drivers/net/wireless/ath/carl9170/tx.c
+++ b/drivers/net/wireless/ath/carl9170/tx.c
@@ -1236,6 +1236,7 @@ static bool carl9170_tx_ps_drop(struct a
{
struct ieee80211_sta *sta;
struct carl9170_sta_info *sta_info;
+ struct ieee80211_tx_info *tx_info;
rcu_read_lock();
sta = __carl9170_get_tx_sta(ar, skb);
@@ -1243,12 +1244,13 @@ static bool carl9170_tx_ps_drop(struct a
goto out_rcu;
sta_info = (void *) sta->drv_priv;
- if (unlikely(sta_info->sleeping)) {
- struct ieee80211_tx_info *tx_info;
+ tx_info = IEEE80211_SKB_CB(skb);
+ if (unlikely(sta_info->sleeping) &&
+ !(tx_info->flags & (IEEE80211_TX_CTL_NO_PS_BUFFER |
+ IEEE80211_TX_CTL_CLEAR_PS_FILT))) {
rcu_read_unlock();
- tx_info = IEEE80211_SKB_CB(skb);
if (tx_info->flags & IEEE80211_TX_CTL_AMPDU)
atomic_dec(&ar->tx_ampdu_upload);
--- a/drivers/net/wireless/iwlegacy/4965-mac.c
+++ b/drivers/net/wireless/iwlegacy/4965-mac.c
@@ -1694,7 +1694,7 @@ il4965_tx_skb(struct il_priv *il, struct
sta_priv = (void *)sta->drv_priv;
if (sta_priv && sta_priv->asleep &&
- (info->flags & IEEE80211_TX_CTL_POLL_RESPONSE)) {
+ (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER)) {
/*
* This sends an asynchronous command to the device,
* but we can rely on it being processed before the
--- a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
@@ -322,7 +322,7 @@ int iwlagn_tx_skb(struct iwl_priv *priv,
sta_priv = (void *)info->control.sta->drv_priv;
if (sta_priv && sta_priv->asleep &&
- (info->flags & IEEE80211_TX_CTL_POLL_RESPONSE)) {
+ (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER)) {
/*
* This sends an asynchronous command to the device,
* but we can rely on it being processed before the
@@ -331,6 +331,10 @@ int iwlagn_tx_skb(struct iwl_priv *priv,
* counter.
* For now set the counter to just 1 since we do not
* support uAPSD yet.
+ *
+ * FIXME: If we get two non-bufferable frames one
+ * after the other, we might only send out one of
+ * them because this is racy.
*/
iwl_sta_modify_sleep_tx_count(priv, sta_id, 1);
}
--- a/drivers/net/wireless/p54/txrx.c
+++ b/drivers/net/wireless/p54/txrx.c
@@ -690,7 +690,7 @@ static void p54_tx_80211_header(struct p
if (!(info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ))
*flags |= P54_HDR_FLAG_DATA_OUT_SEQNR;
- if (info->flags & IEEE80211_TX_CTL_POLL_RESPONSE)
+ if (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER)
*flags |= P54_HDR_FLAG_DATA_OUT_NOCANCEL;
if (info->flags & IEEE80211_TX_CTL_CLEAR_PS_FILT)
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -341,9 +341,9 @@ struct ieee80211_bss_conf {
* used to indicate that a frame was already retried due to PS
* @IEEE80211_TX_INTFL_DONT_ENCRYPT: completely internal to mac80211,
* used to indicate frame should not be encrypted
- * @IEEE80211_TX_CTL_POLL_RESPONSE: This frame is a response to a poll
- * frame (PS-Poll or uAPSD) and should be sent although the station
- * is in powersave mode.
+ * @IEEE80211_TX_CTL_NO_PS_BUFFER: This frame is a response to a poll
+ * frame (PS-Poll or uAPSD) or a non-bufferable MMPDU and must
+ * be sent although the station is in powersave mode.
* @IEEE80211_TX_CTL_MORE_FRAMES: More frames will be passed to the
* transmit function after the current frame, this can be used
* by drivers to kick the DMA queue only if unset or when the
@@ -399,7 +399,7 @@ enum mac80211_tx_control_flags {
IEEE80211_TX_INTFL_NEED_TXPROCESSING = BIT(14),
IEEE80211_TX_INTFL_RETRIED = BIT(15),
IEEE80211_TX_INTFL_DONT_ENCRYPT = BIT(16),
- IEEE80211_TX_CTL_POLL_RESPONSE = BIT(17),
+ IEEE80211_TX_CTL_NO_PS_BUFFER = BIT(17),
IEEE80211_TX_CTL_MORE_FRAMES = BIT(18),
IEEE80211_TX_INTFL_RETRANSMISSION = BIT(19),
/* hole at 20, use later */
@@ -425,7 +425,7 @@ enum mac80211_tx_control_flags {
IEEE80211_TX_CTL_SEND_AFTER_DTIM | IEEE80211_TX_CTL_AMPDU | \
IEEE80211_TX_STAT_TX_FILTERED | IEEE80211_TX_STAT_ACK | \
IEEE80211_TX_STAT_AMPDU | IEEE80211_TX_STAT_AMPDU_NO_BACK | \
- IEEE80211_TX_CTL_RATE_CTRL_PROBE | IEEE80211_TX_CTL_POLL_RESPONSE | \
+ IEEE80211_TX_CTL_RATE_CTRL_PROBE | IEEE80211_TX_CTL_NO_PS_BUFFER | \
IEEE80211_TX_CTL_MORE_FRAMES | IEEE80211_TX_CTL_LDPC | \
IEEE80211_TX_CTL_STBC | IEEE80211_TX_STATUS_EOSP)
@@ -1634,7 +1634,7 @@ void ieee80211_free_txskb(struct ieee802
* the station sends a PS-Poll or a uAPSD trigger frame, mac80211
* will inform the driver of this with the @allow_buffered_frames
* callback; this callback is optional. mac80211 will then transmit
- * the frames as usual and set the %IEEE80211_TX_CTL_POLL_RESPONSE
+ * the frames as usual and set the %IEEE80211_TX_CTL_NO_PS_BUFFER
* on each frame. The last frame in the service period (or the only
* response to a PS-Poll) also has %IEEE80211_TX_STATUS_EOSP set to
* indicate that it ends the service period; as this frame must have
@@ -1642,6 +1642,9 @@ void ieee80211_free_txskb(struct ieee802
* When TX status is reported for this frame, the service period is
* marked has having ended and a new one can be started by the peer.
*
+ * Additionally, non-bufferable MMPDUs can also be transmitted by
+ * mac80211 with the %IEEE80211_TX_CTL_NO_PS_BUFFER set in them.
+ *
* Another race condition can happen on some devices like iwlwifi
* when there are frames queued for the station and it wakes up
* or polls; the frames that are already queued could end up being
@@ -2140,7 +2143,7 @@ enum ieee80211_frame_release_type {
* @allow_buffered_frames: Prepare device to allow the given number of frames
* to go out to the given station. The frames will be sent by mac80211
* via the usual TX path after this call. The TX information for frames
- * released will also have the %IEEE80211_TX_CTL_POLL_RESPONSE flag set
+ * released will also have the %IEEE80211_TX_CTL_NO_PS_BUFFER flag set
* and the last one will also have %IEEE80211_TX_STATUS_EOSP set. In case
* frames from multiple TIDs are released and the driver might reorder
* them between the TIDs, it must set the %IEEE80211_TX_STATUS_EOSP flag
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -187,6 +187,8 @@ static void ieee80211_send_addba_resp(st
memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
memcpy(mgmt->bssid, sdata->u.ibss.bssid, ETH_ALEN);
+ else if (sdata->vif.type == NL80211_IFTYPE_WDS)
+ memcpy(mgmt->bssid, da, ETH_ALEN);
mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
IEEE80211_STYPE_ACTION);
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -81,7 +81,8 @@ static void ieee80211_send_addba_request
memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
if (sdata->vif.type == NL80211_IFTYPE_AP ||
sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
- sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
+ sdata->vif.type == NL80211_IFTYPE_MESH_POINT ||
+ sdata->vif.type == NL80211_IFTYPE_WDS)
memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
else if (sdata->vif.type == NL80211_IFTYPE_STATION)
memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
@@ -471,6 +472,7 @@ int ieee80211_start_tx_ba_session(struct
sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
sdata->vif.type != NL80211_IFTYPE_AP &&
+ sdata->vif.type != NL80211_IFTYPE_WDS &&
sdata->vif.type != NL80211_IFTYPE_ADHOC)
return -EINVAL;
--- a/net/mac80211/debugfs_sta.c
+++ b/net/mac80211/debugfs_sta.c
@@ -63,11 +63,11 @@ static ssize_t sta_flags_read(struct fil
test_sta_flag(sta, WLAN_STA_##flg) ? #flg "\n" : ""
int res = scnprintf(buf, sizeof(buf),
- "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
+ "%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",
TEST(AUTH), TEST(ASSOC), TEST(PS_STA),
TEST(PS_DRIVER), TEST(AUTHORIZED),
TEST(SHORT_PREAMBLE),
- TEST(WME), TEST(WDS), TEST(CLEAR_PS_FILT),
+ TEST(WME), TEST(CLEAR_PS_FILT),
TEST(MFP), TEST(BLOCK_BA), TEST(PSPOLL),
TEST(UAPSD), TEST(SP), TEST(TDLS_PEER),
TEST(TDLS_PEER_AUTH), TEST(4ADDR_EVENT),
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -178,7 +178,6 @@ static int ieee80211_do_open(struct net_
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
- struct sta_info *sta;
u32 changed = 0;
int res;
u32 hw_reconf_flags = 0;
@@ -309,28 +308,6 @@ static int ieee80211_do_open(struct net_
set_bit(SDATA_STATE_RUNNING, &sdata->state);
- if (sdata->vif.type == NL80211_IFTYPE_WDS) {
- /* Create STA entry for the WDS peer */
- sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr,
- GFP_KERNEL);
- if (!sta) {
- res = -ENOMEM;
- goto err_del_interface;
- }
-
- sta_info_pre_move_state(sta, IEEE80211_STA_AUTH);
- sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC);
- sta_info_pre_move_state(sta, IEEE80211_STA_AUTHORIZED);
-
- res = sta_info_insert(sta);
- if (res) {
- /* STA has been freed */
- goto err_del_interface;
- }
-
- rate_control_rate_init(sta);
- }
-
/*
* set_multicast_list will be invoked by the networking core
* which will check whether any increments here were done in
@@ -357,8 +334,7 @@ static int ieee80211_do_open(struct net_
netif_tx_start_all_queues(dev);
return 0;
- err_del_interface:
- drv_remove_interface(local, sdata);
+
err_stop:
if (!local->open_count)
drv_stop(local);
@@ -722,6 +698,70 @@ static void ieee80211_if_setup(struct ne
dev->destructor = free_netdev;
}
+static void ieee80211_wds_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb)
+{
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_rx_status *rx_status;
+ struct ieee802_11_elems elems;
+ struct ieee80211_mgmt *mgmt;
+ struct sta_info *sta;
+ size_t baselen;
+ u32 rates = 0;
+ u16 stype;
+ bool new = false;
+ enum ieee80211_band band = local->hw.conf.channel->band;
+ struct ieee80211_supported_band *sband = local->hw.wiphy->bands[band];
+
+ rx_status = IEEE80211_SKB_RXCB(skb);
+ mgmt = (struct ieee80211_mgmt *) skb->data;
+ stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE;
+
+ if (stype != IEEE80211_STYPE_BEACON)
+ return;
+
+ baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
+ if (baselen > skb->len)
+ return;
+
+ ieee802_11_parse_elems(mgmt->u.probe_resp.variable,
+ skb->len - baselen, &elems);
+
+ rates = ieee80211_sta_get_rates(local, &elems, band);
+
+ rcu_read_lock();
+
+ sta = sta_info_get(sdata, sdata->u.wds.remote_addr);
+
+ if (!sta) {
+ rcu_read_unlock();
+ sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr,
+ GFP_KERNEL);
+ if (!sta)
+ return;
+
+ new = true;
+ }
+
+ sta->last_rx = jiffies;
+ sta->sta.supp_rates[local->hw.conf.channel->band] = rates;
+
+ if (elems.ht_cap_elem)
+ ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
+ elems.ht_cap_elem, &sta->sta.ht_cap);
+
+ if (elems.wmm_param)
+ set_sta_flag(sta, WLAN_STA_WME);
+
+ if (new) {
+ set_sta_flag(sta, WLAN_STA_AUTHORIZED);
+ rate_control_rate_init(sta);
+ sta_info_insert_rcu(sta);
+ }
+
+ rcu_read_unlock();
+}
+
static void ieee80211_iface_work(struct work_struct *work)
{
struct ieee80211_sub_if_data *sdata =
@@ -826,6 +866,9 @@ static void ieee80211_iface_work(struct
break;
ieee80211_mesh_rx_queued_mgmt(sdata, skb);
break;
+ case NL80211_IFTYPE_WDS:
+ ieee80211_wds_rx_queued_mgmt(sdata, skb);
+ break;
default:
WARN(1, "frame for unexpected interface type");
break;
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2282,6 +2282,7 @@ ieee80211_rx_h_action(struct ieee80211_r
sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
sdata->vif.type != NL80211_IFTYPE_AP &&
+ sdata->vif.type != NL80211_IFTYPE_WDS &&
sdata->vif.type != NL80211_IFTYPE_ADHOC)
break;
@@ -2492,14 +2493,15 @@ ieee80211_rx_h_mgmt(struct ieee80211_rx_
if (!ieee80211_vif_is_mesh(&sdata->vif) &&
sdata->vif.type != NL80211_IFTYPE_ADHOC &&
- sdata->vif.type != NL80211_IFTYPE_STATION)
+ sdata->vif.type != NL80211_IFTYPE_STATION &&
+ sdata->vif.type != NL80211_IFTYPE_WDS)
return RX_DROP_MONITOR;
switch (stype) {
case cpu_to_le16(IEEE80211_STYPE_AUTH):
case cpu_to_le16(IEEE80211_STYPE_BEACON):
case cpu_to_le16(IEEE80211_STYPE_PROBE_RESP):
- /* process for all: mesh, mlme, ibss */
+ /* process for all: mesh, mlme, ibss, wds */
break;
case cpu_to_le16(IEEE80211_STYPE_ASSOC_RESP):
case cpu_to_le16(IEEE80211_STYPE_REASSOC_RESP):
@@ -2853,10 +2855,16 @@ static int prepare_for_handlers(struct i
}
break;
case NL80211_IFTYPE_WDS:
- if (bssid || !ieee80211_is_data(hdr->frame_control))
- return 0;
if (compare_ether_addr(sdata->u.wds.remote_addr, hdr->addr2))
return 0;
+
+ if (ieee80211_is_data(hdr->frame_control) ||
+ ieee80211_is_action(hdr->frame_control)) {
+ if (compare_ether_addr(sdata->vif.addr, hdr->addr1))
+ return 0;
+ } else if (!ieee80211_is_beacon(hdr->frame_control))
+ return 0;
+
break;
default:
/* should never get here */
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -1050,7 +1050,7 @@ static void ieee80211_send_null_response
* exchange. Also set EOSP to indicate this packet
* ends the poll/service period.
*/
- info->flags |= IEEE80211_TX_CTL_POLL_RESPONSE |
+ info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER |
IEEE80211_TX_STATUS_EOSP |
IEEE80211_TX_CTL_REQ_TX_STATUS;
@@ -1177,7 +1177,7 @@ ieee80211_sta_ps_deliver_response(struct
* STA may still remain is PS mode after this frame
* exchange.
*/
- info->flags |= IEEE80211_TX_CTL_POLL_RESPONSE;
+ info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER;
/*
* Use MoreData flag to indicate whether there are
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -31,7 +31,6 @@
* @WLAN_STA_SHORT_PREAMBLE: Station is capable of receiving short-preamble
* frames.
* @WLAN_STA_WME: Station is a QoS-STA.
- * @WLAN_STA_WDS: Station is one of our WDS peers.
* @WLAN_STA_CLEAR_PS_FILT: Clear PS filter in hardware (using the
* IEEE80211_TX_CTL_CLEAR_PS_FILT control flag) when the next
* frame to this station is transmitted.
@@ -62,7 +61,6 @@ enum ieee80211_sta_info_flags {
WLAN_STA_AUTHORIZED,
WLAN_STA_SHORT_PREAMBLE,
WLAN_STA_WME,
- WLAN_STA_WDS,
WLAN_STA_CLEAR_PS_FILT,
WLAN_STA_MFP,
WLAN_STA_BLOCK_BA,
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -448,18 +448,23 @@ ieee80211_tx_h_unicast_ps_buf(struct iee
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
struct ieee80211_local *local = tx->local;
- if (unlikely(!sta ||
- ieee80211_is_probe_resp(hdr->frame_control) ||
- ieee80211_is_auth(hdr->frame_control) ||
- ieee80211_is_assoc_resp(hdr->frame_control) ||
- ieee80211_is_reassoc_resp(hdr->frame_control)))
+ if (unlikely(!sta))
return TX_CONTINUE;
if (unlikely((test_sta_flag(sta, WLAN_STA_PS_STA) ||
test_sta_flag(sta, WLAN_STA_PS_DRIVER)) &&
- !(info->flags & IEEE80211_TX_CTL_POLL_RESPONSE))) {
+ !(info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER))) {
int ac = skb_get_queue_mapping(tx->skb);
+ /* only deauth, disassoc and action are bufferable MMPDUs */
+ if (ieee80211_is_mgmt(hdr->frame_control) &&
+ !ieee80211_is_deauth(hdr->frame_control) &&
+ !ieee80211_is_disassoc(hdr->frame_control) &&
+ !ieee80211_is_action(hdr->frame_control)) {
+ info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER;
+ return TX_CONTINUE;
+ }
+
#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
printk(KERN_DEBUG "STA %pM aid %d: PS buffer for AC %d\n",
sta->sta.addr, sta->sta.aid, ac);
View Git Blame Copy Permalink