1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-24 23:25:32 +02:00
openwrt-xburst/target/linux/ar71xx
nbd ea9bbe955d ar71xx: fix up alignment handling
- on ar724x, rx buffers can be aligned with an offset of 2, which keeps the ip header aligned
- alignment offset is only added if the ar8216 workaround is not active and the phy driver does not advertise its own packet alignment
- ar71xx and ar91xx can not handle rx alignment offsets, however taking a hit on unaligned exceptions seems to have less overhead than re-aligning the data for large packets
- use memmove to re-align small packets, if necessary

tested on ar9132, ar7240 and ar7242 based devices without ar8216 headers

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20892 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-15 23:31:17 +00:00
..
base-files ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards 2010-04-09 08:40:09 +00:00
files ar71xx: fix up alignment handling 2010-04-15 23:31:17 +00:00
image ar71xx: fix image builds (broken by r20834) 2010-04-13 18:01:46 +00:00
patches-2.6.32 ar71xx: nuke clocksource init patches, it is not required since 2.6.27 2010-04-09 13:33:03 +00:00
patches-2.6.33 ar71xx: nuke clocksource init patches, it is not required since 2.6.27 2010-04-09 13:33:03 +00:00
patches-2.6.34 ar71xx: nuke clocksource init patches, it is not required since 2.6.27 2010-04-09 13:33:03 +00:00
profiles ar71xx: add a profile for PB92 2010-04-10 16:50:20 +00:00
base-files.mk [ar71xx] defconfig: remove network config installed by base-files so defconfig can work 2009-02-26 05:54:46 +00:00
config-2.6.32 [PATCH 1/2] Add support for the ar8316 switch. 2010-04-05 23:03:16 +00:00
config-2.6.33 [PATCH 1/2] Add support for the ar8316 switch. 2010-04-05 23:03:16 +00:00
config-2.6.34 [PATCH 1/2] Add support for the ar8316 switch. 2010-04-05 23:03:16 +00:00
Makefile kernel: update to 2.6.32.10 2010-03-26 10:45:25 +00:00