mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-18 15:14:05 +02:00
176d390d98
The following error is displayed during network configuration on any device that has DEVICE_TYPE set to something else then router, or has brctl functionality disabled through some other method: "brctl: SIOCGIFBR: Package not installed" This is due to the unbridge function being called, which uses "brctl show" to determine if the interface is bridged. Signed-off-by: Ithamar R. Adema <ithamar.adema@team-embedded.nl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20218 3c298f89-4303-0410-b956-a3cf2f4a3e73
348 lines
9.2 KiB
Bash
Executable File
348 lines
9.2 KiB
Bash
Executable File
#!/bin/sh
|
|
# Copyright (C) 2006 OpenWrt.org
|
|
|
|
# DEBUG="echo"
|
|
|
|
find_config() {
|
|
local iftype device iface ifaces ifn
|
|
for ifn in $interfaces; do
|
|
config_get iftype "$ifn" type
|
|
config_get iface "$ifn" ifname
|
|
case "$iftype" in
|
|
bridge) config_get ifaces "$ifn" ifnames;;
|
|
esac
|
|
config_get device "$ifn" device
|
|
for ifc in $device $iface $ifaces; do
|
|
[ ."$ifc" = ."$1" ] && {
|
|
echo "$ifn"
|
|
return 0
|
|
}
|
|
done
|
|
done
|
|
|
|
return 1;
|
|
}
|
|
|
|
scan_interfaces() {
|
|
local cfgfile="${1:-network}"
|
|
interfaces=
|
|
config_cb() {
|
|
case "$1" in
|
|
interface)
|
|
config_set "$2" auto 1
|
|
;;
|
|
esac
|
|
local iftype ifname device proto
|
|
config_get iftype "$CONFIG_SECTION" TYPE
|
|
case "$iftype" in
|
|
interface)
|
|
append interfaces "$CONFIG_SECTION"
|
|
config_get proto "$CONFIG_SECTION" proto
|
|
config_get iftype "$CONFIG_SECTION" type
|
|
config_get ifname "$CONFIG_SECTION" ifname
|
|
config_get device "$CONFIG_SECTION" device "$ifname"
|
|
config_set "$CONFIG_SECTION" device "$device"
|
|
case "$iftype" in
|
|
bridge)
|
|
config_set "$CONFIG_SECTION" ifnames "$device"
|
|
config_set "$CONFIG_SECTION" ifname br-"$CONFIG_SECTION"
|
|
;;
|
|
esac
|
|
( type "scan_$proto" ) >/dev/null 2>/dev/null && eval "scan_$proto '$CONFIG_SECTION'"
|
|
;;
|
|
esac
|
|
}
|
|
config_load "${cfgfile}"
|
|
}
|
|
|
|
add_vlan() {
|
|
local vif="${1%\.*}"
|
|
|
|
[ "$1" = "$vif" ] || ifconfig "$1" >/dev/null 2>/dev/null || {
|
|
ifconfig "$vif" up 2>/dev/null >/dev/null || add_vlan "$vif"
|
|
$DEBUG vconfig add "$vif" "${1##*\.}"
|
|
return 0
|
|
}
|
|
return 1
|
|
}
|
|
|
|
# sort the device list, drop duplicates
|
|
sort_list() {
|
|
local arg="$*"
|
|
(
|
|
for item in $arg; do
|
|
echo "$item"
|
|
done
|
|
) | sort -u
|
|
}
|
|
|
|
# Create the interface, if necessary.
|
|
# Return status 0 indicates that the setup_interface() call should continue
|
|
# Return status 1 means that everything is set up already.
|
|
|
|
prepare_interface() {
|
|
local iface="$1"
|
|
local config="$2"
|
|
local vifmac="$3"
|
|
|
|
# if we're called for the bridge interface itself, don't bother trying
|
|
# to create any interfaces here. The scripts have already done that, otherwise
|
|
# the bridge interface wouldn't exist.
|
|
[ "br-$config" = "$iface" -o -e "$iface" ] && return 0;
|
|
|
|
ifconfig "$iface" 2>/dev/null >/dev/null && {
|
|
local proto
|
|
config_get proto "$config" proto
|
|
|
|
# make sure the interface is removed from any existing bridge and deconfigured,
|
|
# (deconfigured only if the interface is not set to proto=none)
|
|
unbridge "$iface"
|
|
[ "$proto" = none ] || ifconfig "$iface" 0.0.0.0
|
|
|
|
# Change interface MAC address if requested
|
|
[ -n "$vifmac" ] && {
|
|
ifconfig "$iface" down
|
|
ifconfig "$iface" hw ether "$vifmac" up
|
|
}
|
|
}
|
|
|
|
# Setup VLAN interfaces
|
|
add_vlan "$iface" && return 1
|
|
ifconfig "$iface" 2>/dev/null >/dev/null || return 0
|
|
|
|
# Setup bridging
|
|
local iftype
|
|
config_get iftype "$config" type
|
|
case "$iftype" in
|
|
bridge)
|
|
[ -x /usr/sbin/brctl ] && {
|
|
ifconfig "br-$config" 2>/dev/null >/dev/null && {
|
|
local newdevs devices
|
|
config_get devices "$config" device
|
|
for dev in $(sort_list "$devices" "$iface"); do
|
|
append newdevs "$dev"
|
|
done
|
|
uci_set_state network "$config" device "$newdevs"
|
|
$DEBUG ifconfig "$iface" 0.0.0.0
|
|
$DEBUG brctl addif "br-$config" "$iface"
|
|
# Bridge existed already. No further processing necesary
|
|
} || {
|
|
local stp
|
|
config_get_bool stp "$config" stp 0
|
|
$DEBUG brctl addbr "br-$config"
|
|
$DEBUG brctl setfd "br-$config" 0
|
|
$DEBUG ifconfig "br-$config" up
|
|
$DEBUG ifconfig "$iface" 0.0.0.0
|
|
$DEBUG brctl addif "br-$config" "$iface"
|
|
$DEBUG brctl stp "br-$config" $stp
|
|
# Creating the bridge here will have triggered a hotplug event, which will
|
|
# result in another setup_interface() call, so we simply stop processing
|
|
# the current event at this point.
|
|
}
|
|
ifconfig "$iface" up 2>/dev/null >/dev/null
|
|
return 1
|
|
}
|
|
;;
|
|
esac
|
|
return 0
|
|
}
|
|
|
|
set_interface_ifname() {
|
|
local config="$1"
|
|
local ifname="$2"
|
|
|
|
local device
|
|
config_get device "$1" device
|
|
uci_set_state network "$config" ifname "$ifname"
|
|
uci_set_state network "$config" device "$device"
|
|
}
|
|
|
|
setup_interface_none() {
|
|
env -i ACTION="ifup" INTERFACE="$2" DEVICE="$1" PROTO=none /sbin/hotplug-call "iface" &
|
|
}
|
|
|
|
setup_interface_static() {
|
|
local iface="$1"
|
|
local config="$2"
|
|
|
|
local ipaddr netmask ip6addr
|
|
config_get ipaddr "$config" ipaddr
|
|
config_get netmask "$config" netmask
|
|
config_get ip6addr "$config" ip6addr
|
|
[ -z "$ipaddr" -o -z "$netmask" ] && [ -z "$ip6addr" ] && return 1
|
|
|
|
local gateway ip6gw dns bcast
|
|
config_get gateway "$config" gateway
|
|
config_get ip6gw "$config" ip6gw
|
|
config_get dns "$config" dns
|
|
config_get bcast "$config" broadcast
|
|
|
|
[ -z "$ipaddr" ] || $DEBUG ifconfig "$iface" "$ipaddr" netmask "$netmask" broadcast "${bcast:-+}"
|
|
[ -z "$ip6addr" ] || $DEBUG ifconfig "$iface" add "$ip6addr"
|
|
[ -z "$gateway" ] || $DEBUG route add default gw "$gateway" dev "$iface"
|
|
[ -z "$ip6gw" ] || $DEBUG route -A inet6 add default gw "$ip6gw" dev "$iface"
|
|
[ -z "$dns" ] || {
|
|
for ns in $dns; do
|
|
grep "$ns" /tmp/resolv.conf.auto 2>/dev/null >/dev/null || {
|
|
echo "nameserver $ns" >> /tmp/resolv.conf.auto
|
|
}
|
|
done
|
|
}
|
|
|
|
config_get type "$config" TYPE
|
|
[ "$type" = "alias" ] && return 0
|
|
|
|
env -i ACTION="ifup" INTERFACE="$config" DEVICE="$iface" PROTO=static /sbin/hotplug-call "iface" &
|
|
}
|
|
|
|
setup_interface_alias() {
|
|
local config="$1"
|
|
local parent="$2"
|
|
local iface="$3"
|
|
|
|
local cfg
|
|
config_get cfg "$config" interface
|
|
[ "$parent" == "$cfg" ] || return 0
|
|
|
|
# alias counter
|
|
local ctr
|
|
config_get ctr "$parent" alias_count 0
|
|
ctr="$(($ctr + 1))"
|
|
config_set "$parent" alias_count "$ctr"
|
|
|
|
# alias list
|
|
local list
|
|
config_get list "$parent" aliases
|
|
append list "$config"
|
|
config_set "$parent" aliases "$list"
|
|
|
|
iface="$iface:$ctr"
|
|
set_interface_ifname "$config" "$iface"
|
|
|
|
local proto
|
|
config_get proto "$config" proto "static"
|
|
case "${proto}" in
|
|
static)
|
|
setup_interface_static "$iface" "$config"
|
|
;;
|
|
*)
|
|
echo "Unsupported type '$proto' for alias config '$config'"
|
|
return 1
|
|
;;
|
|
esac
|
|
}
|
|
|
|
setup_interface() {
|
|
local iface_main="$1"
|
|
local config="$2"
|
|
local proto="$3"
|
|
local vifmac="$4"
|
|
local ip6addr_main=
|
|
|
|
[ -n "$config" ] || {
|
|
config=$(find_config "$iface_main")
|
|
[ "$?" = 0 ] || return 1
|
|
}
|
|
|
|
prepare_interface "$iface_main" "$config" "$vifmac" || return 0
|
|
|
|
[ "$iface_main" = "br-$config" ] && {
|
|
# need to bring up the bridge and wait a second for
|
|
# it to switch to the 'forwarding' state, otherwise
|
|
# it will lose its routes...
|
|
ifconfig "$iface_main" up
|
|
sleep 1
|
|
}
|
|
|
|
# Interface settings
|
|
grep "$iface_main:" /proc/net/dev > /dev/null && {
|
|
local mtu macaddr
|
|
config_get mtu "$config" mtu
|
|
config_get macaddr "$config" macaddr
|
|
[ -n "$macaddr" ] && $DEBUG ifconfig "$iface_main" down
|
|
$DEBUG ifconfig "$iface_main" ${macaddr:+hw ether "$macaddr"} ${mtu:+mtu $mtu} up
|
|
}
|
|
set_interface_ifname "$config" "$iface_main"
|
|
|
|
pidfile="/var/run/$iface_main.pid"
|
|
[ -n "$proto" ] || config_get proto "$config" proto
|
|
case "$proto" in
|
|
static)
|
|
config_get ip6addr_main "$config" ip6addr
|
|
setup_interface_static "$iface_main" "$config"
|
|
;;
|
|
dhcp)
|
|
# prevent udhcpc from starting more than once
|
|
lock "/var/lock/dhcp-$iface_main"
|
|
local pid="$(cat "$pidfile" 2>/dev/null)"
|
|
if [ -d "/proc/$pid" ] && grep udhcpc "/proc/${pid}/cmdline" >/dev/null 2>/dev/null; then
|
|
lock -u "/var/lock/dhcp-$iface_main"
|
|
else
|
|
local ipaddr netmask hostname proto1 clientid
|
|
config_get ipaddr "$config" ipaddr
|
|
config_get netmask "$config" netmask
|
|
config_get hostname "$config" hostname
|
|
config_get proto1 "$config" proto
|
|
config_get clientid "$config" clientid
|
|
|
|
[ -z "$ipaddr" ] || \
|
|
$DEBUG ifconfig "$iface_main" "$ipaddr" ${netmask:+netmask "$netmask"}
|
|
|
|
# don't stay running in background if dhcp is not the main proto on the interface (e.g. when using pptp)
|
|
local dhcpopts
|
|
[ ."$proto1" != ."$proto" ] && dhcpopts="-n -q"
|
|
$DEBUG eval udhcpc -t 0 -i "$iface_main" ${ipaddr:+-r $ipaddr} ${hostname:+-H $hostname} ${clientid:+-c $clientid} -b -p "$pidfile" ${dhcpopts:- -O rootpath -R &}
|
|
lock -u "/var/lock/dhcp-$iface_main"
|
|
fi
|
|
;;
|
|
none)
|
|
setup_interface_none "$iface_main" "$config"
|
|
;;
|
|
*)
|
|
if ( eval "type setup_interface_$proto" ) >/dev/null 2>/dev/null; then
|
|
eval "setup_interface_$proto '$iface_main' '$config' '$proto'"
|
|
else
|
|
echo "Interface type $proto not supported."
|
|
return 1
|
|
fi
|
|
;;
|
|
esac
|
|
[ "$proto" = none ] || {
|
|
for ifn in `ifconfig | grep "^$iface_main:" | awk '{print $1}'`; do
|
|
ifconfig "$ifn" down
|
|
done
|
|
}
|
|
|
|
local aliases
|
|
config_set "$config" aliases ""
|
|
config_set "$config" alias_count 0
|
|
config_foreach setup_interface_alias alias "$config" "$iface_main"
|
|
config_get aliases "$config" aliases
|
|
[ -z "$aliases" ] || uci_set_state network "$config" aliases "$aliases"
|
|
|
|
# put the ip6addr back to the beginning to become the main ip again
|
|
[ -z "$ip6addr_main" ] || {
|
|
$DEBUG ifconfig "$iface_main" del "$ip6addr_main"
|
|
$DEBUG ifconfig "$iface_main" add "$ip6addr_main"
|
|
}
|
|
}
|
|
|
|
stop_interface_dhcp() {
|
|
local config="$1"
|
|
uci -P /var/state revert "network.$config"
|
|
}
|
|
|
|
unbridge() {
|
|
local dev="$1"
|
|
local brdev
|
|
|
|
[ -x /usr/sbin/brctl ] || return 0
|
|
brctl show 2>/dev/null | grep "$dev" >/dev/null && {
|
|
# interface is still part of a bridge, correct that
|
|
|
|
for brdev in $(brctl show | awk '$2 ~ /^[0-9].*\./ { print $1 }'); do
|
|
brctl delif "$brdev" "$dev" 2>/dev/null >/dev/null
|
|
done
|
|
}
|
|
}
|