mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-18 08:45:20 +02:00
c6ca447d98
Isolate the PCI specific parts and group them under CONFIG_TULIP_PCI CONFIG_TULIP_PLATFORM can be enabled for a platform style Tulip driver. Signed-off-by: Florian Fainelli <florian@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34557 3c298f89-4303-0410-b956-a3cf2f4a3e73
452 lines
12 KiB
Diff
452 lines
12 KiB
Diff
--- a/drivers/net/ethernet/dec/tulip/Kconfig
|
|
+++ b/drivers/net/ethernet/dec/tulip/Kconfig
|
|
@@ -60,6 +60,14 @@ config TULIP_PCI
|
|
To compile this driver as a module, choose M here. The module will
|
|
be called tulip.
|
|
|
|
+config TULIP_PLATFORM
|
|
+ tristate "DECchip Tulip (dc2114x) Platform support"
|
|
+ depends on HAS_IOMEM
|
|
+ select TULIP
|
|
+ select CRC32
|
|
+ ---help---
|
|
+ This driver is for the platform variant.
|
|
+
|
|
config TULIP_MWI
|
|
bool "New bus configuration (EXPERIMENTAL)"
|
|
depends on TULIP_PCI && EXPERIMENTAL
|
|
--- a/drivers/net/ethernet/dec/tulip/tulip_core.c
|
|
+++ b/drivers/net/ethernet/dec/tulip/tulip_core.c
|
|
@@ -27,6 +27,8 @@
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/etherdevice.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/platform_data/tulip.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/crc32.h>
|
|
@@ -204,6 +206,9 @@ struct tulip_chip_table tulip_tbl[] = {
|
|
{ "Conexant LANfinity", 256, 0x0001ebef,
|
|
HAS_MII | HAS_ACPI, tulip_timer, tulip_media_task },
|
|
|
|
+ { "Infineon ADM8668", 256, 0x0001a451,
|
|
+ MC_HASH_ONLY | COMET_MAC_ADDR, tulip_timer, tulip_media_task, },
|
|
+
|
|
};
|
|
|
|
#ifdef CONFIG_TULIP_PCI
|
|
@@ -395,6 +400,7 @@ static void tulip_up(struct net_device *
|
|
i = 0;
|
|
if (tp->mtable == NULL)
|
|
goto media_picked;
|
|
+
|
|
if (dev->if_port) {
|
|
int looking_for = tulip_media_cap[dev->if_port] & MediaIsMII ? 11 :
|
|
(dev->if_port == 12 ? 0 : dev->if_port);
|
|
@@ -488,6 +494,10 @@ media_picked:
|
|
iowrite32(ioread32(ioaddr + 0x88) | 1, ioaddr + 0x88);
|
|
dev->if_port = tp->mii_cnt ? 11 : 0;
|
|
tp->csr6 = 0x00040000;
|
|
+ } else if (tp->chip_id == ADM8668) {
|
|
+ /* Enable automatic Tx underrun recovery. */
|
|
+ iowrite32(ioread32(ioaddr + 0x88) | 1, ioaddr + 0x88);
|
|
+ tp->csr6 = 0x00040000;
|
|
} else if (tp->chip_id == AX88140) {
|
|
tp->csr6 = tp->mii_cnt ? 0x00040100 : 0x00000100;
|
|
} else
|
|
@@ -657,6 +667,10 @@ static void tulip_init_ring(struct net_d
|
|
mapping = pci_map_single(tp->pdev, skb->data,
|
|
PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
|
|
#endif
|
|
+#ifdef CONFIG_TULIP_PLATFORM
|
|
+ mapping = dma_map_single(&tp->pldev->dev, skb->data,
|
|
+ PKT_BUF_SZ, DMA_FROM_DEVICE);
|
|
+#endif
|
|
tp->rx_buffers[i].mapping = mapping;
|
|
skb->dev = dev; /* Mark as being used by this device. */
|
|
tp->rx_ring[i].status = cpu_to_le32(DescOwned); /* Owned by Tulip chip */
|
|
@@ -694,6 +708,11 @@ tulip_start_xmit(struct sk_buff *skb, st
|
|
mapping = pci_map_single(tp->pdev, skb->data,
|
|
skb->len, PCI_DMA_TODEVICE);
|
|
#endif
|
|
+#ifdef CONFIG_TULIP_PLATFORM
|
|
+ mapping = dma_map_single(&tp->pldev->dev, skb->data,
|
|
+ skb->len,
|
|
+ DMA_TO_DEVICE);
|
|
+#endif
|
|
tp->tx_buffers[entry].mapping = mapping;
|
|
tp->tx_ring[entry].buffer1 = cpu_to_le32(mapping);
|
|
|
|
@@ -757,6 +776,11 @@ static void tulip_clean_tx_ring(struct t
|
|
tp->tx_buffers[entry].skb->len,
|
|
PCI_DMA_TODEVICE);
|
|
#endif
|
|
+#ifdef CONFIG_TULIP_PLATFORM
|
|
+ dma_unmap_single(&tp->pldev->dev, tp->tx_buffers[entry].mapping,
|
|
+ tp->tx_buffers[entry].skb->len,
|
|
+ DMA_TO_DEVICE);
|
|
+#endif
|
|
|
|
/* Free the original skb. */
|
|
dev_kfree_skb_irq(tp->tx_buffers[entry].skb);
|
|
@@ -834,6 +858,10 @@ static void tulip_free_ring (struct net_
|
|
pci_unmap_single(tp->pdev, mapping, PKT_BUF_SZ,
|
|
PCI_DMA_FROMDEVICE);
|
|
#endif
|
|
+#ifdef CONFIG_TULIP_PLATFORM
|
|
+ dma_unmap_single(&tp->pldev->dev, mapping, PKT_BUF_SZ,
|
|
+ DMA_FROM_DEVICE);
|
|
+#endif
|
|
dev_kfree_skb (skb);
|
|
}
|
|
}
|
|
@@ -846,6 +874,10 @@ static void tulip_free_ring (struct net_
|
|
pci_unmap_single(tp->pdev, tp->tx_buffers[i].mapping,
|
|
skb->len, PCI_DMA_TODEVICE);
|
|
#endif
|
|
+#ifdef CONFIG_TULIP_PLATFORM
|
|
+ dma_unmap_single(&tp->pldev->dev, tp->tx_buffers[i].mapping,
|
|
+ skb->len, DMA_TO_DEVICE);
|
|
+#endif
|
|
dev_kfree_skb (skb);
|
|
}
|
|
tp->tx_buffers[i].skb = NULL;
|
|
@@ -900,6 +932,9 @@ static void tulip_get_drvinfo(struct net
|
|
#ifdef CONFIG_TULIP_PCI
|
|
strlcpy(info->bus_info, pci_name(np->pdev), sizeof(info->bus_info));
|
|
#endif
|
|
+#ifdef CONFIG_TULIP_PLATFORM
|
|
+ strlcpy(info->bus_info, "platform", sizeof(info->bus_info));
|
|
+#endif
|
|
}
|
|
|
|
|
|
@@ -915,6 +950,9 @@ static int tulip_ethtool_set_wol(struct
|
|
#ifdef CONFIG_TULIP_PCI
|
|
device_set_wakeup_enable(&tp->pdev->dev, tp->wolinfo.wolopts);
|
|
#endif
|
|
+#ifdef CONFIG_TULIP_PLATFORM
|
|
+ device_set_wakeup_enable(&tp->pldev->dev, tp->wolinfo.wolopts);
|
|
+#endif
|
|
return 0;
|
|
}
|
|
|
|
@@ -1193,9 +1231,9 @@ static void set_rx_mode(struct net_devic
|
|
|
|
}
|
|
|
|
+#ifdef CONFIG_TULIP_PCI
|
|
tp->tx_buffers[entry].skb = NULL;
|
|
tp->tx_buffers[entry].mapping =
|
|
-#ifdef CONFIG_TULIP_PCI
|
|
pci_map_single(tp->pdev, tp->setup_frame,
|
|
sizeof(tp->setup_frame),
|
|
PCI_DMA_TODEVICE);
|
|
@@ -1219,6 +1257,9 @@ static void set_rx_mode(struct net_devic
|
|
spin_unlock_irqrestore(&tp->lock, flags);
|
|
}
|
|
|
|
+ if (tp->chip_id == ADM8668)
|
|
+ csr6 |= (1 << 9); /* force 100Mbps full duplex */
|
|
+
|
|
iowrite32(csr6, ioaddr + CSR6);
|
|
}
|
|
|
|
@@ -1991,6 +2032,124 @@ static void __devexit tulip_remove_one (
|
|
}
|
|
#endif /* CONFIG_TULIP_PCI */
|
|
|
|
+#ifdef CONFIG_TULIP_PLATFORM
|
|
+static int __devinit tulip_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct tulip_private *tp;
|
|
+ struct tulip_platform_data *pdata;
|
|
+ struct net_device *dev;
|
|
+ struct resource *res;
|
|
+ void __iomem *ioaddr;
|
|
+ int irq;
|
|
+
|
|
+ if (pdev->id < 0 || pdev->id >= MAX_UNITS)
|
|
+ return -EINVAL;
|
|
+
|
|
+ if (!(res = platform_get_resource(pdev, IORESOURCE_IRQ, 0)))
|
|
+ return -ENODEV;
|
|
+ irq = res->start;
|
|
+ if (!(res = platform_get_resource(pdev, IORESOURCE_MEM, 0)))
|
|
+ return -ENODEV;
|
|
+ if (!(ioaddr = ioremap(res->start, res->end - res->start)))
|
|
+ return -ENODEV;
|
|
+
|
|
+ pdata = pdev->dev.platform_data;
|
|
+ if (!pdata)
|
|
+ return -ENODEV;
|
|
+
|
|
+ if (!(dev = alloc_etherdev(sizeof (*tp))))
|
|
+ return -ENOMEM;
|
|
+
|
|
+ /* setup net dev */
|
|
+ dev->base_addr = (unsigned long)res->start;
|
|
+ dev->irq = irq;
|
|
+ SET_NETDEV_DEV(dev, &pdev->dev);
|
|
+
|
|
+ /* tulip private struct */
|
|
+ tp = netdev_priv(dev);
|
|
+ tp->dev = dev;
|
|
+ tp->base_addr = ioaddr;
|
|
+ tp->csr0 = 0;
|
|
+ tp->pldev = pdev;
|
|
+ tp->rx_ring = dma_alloc_coherent(&pdev->dev,
|
|
+ sizeof(struct tulip_rx_desc) * RX_RING_SIZE +
|
|
+ sizeof(struct tulip_tx_desc) * TX_RING_SIZE,
|
|
+ &tp->rx_ring_dma, GFP_KERNEL);
|
|
+ if (!tp->rx_ring)
|
|
+ return -ENODEV;
|
|
+ tp->tx_ring = (struct tulip_tx_desc *)(tp->rx_ring + RX_RING_SIZE);
|
|
+ tp->tx_ring_dma = tp->rx_ring_dma + sizeof(struct tulip_rx_desc) * RX_RING_SIZE;
|
|
+
|
|
+ tp->chip_id = pdata->chip_id;
|
|
+ tp->flags = tulip_tbl[tp->chip_id].flags;
|
|
+
|
|
+ spin_lock_init(&tp->lock);
|
|
+ spin_lock_init(&tp->mii_lock);
|
|
+
|
|
+ init_timer(&tp->timer);
|
|
+ tp->timer.data = (unsigned long)dev;
|
|
+ tp->timer.function = tulip_tbl[tp->chip_id].media_timer;
|
|
+
|
|
+ INIT_WORK(&tp->media_work, tulip_tbl[tp->chip_id].media_task);
|
|
+
|
|
+ /* Stop the chip's Tx and Rx processes. */
|
|
+ tulip_stop_rxtx(tp);
|
|
+
|
|
+ /* Clear the missed-packet counter. */
|
|
+ ioread32(ioaddr + CSR8);
|
|
+
|
|
+ if (!is_valid_ether_addr(pdata->mac)) {
|
|
+ dev_info(&pdev->dev, "generating random ethernet MAC\n");
|
|
+ random_ether_addr(dev->dev_addr);
|
|
+ } else
|
|
+ memcpy(dev->dev_addr, pdata->mac, ETH_ALEN);
|
|
+
|
|
+ /* The Tulip-specific entries in the device structure. */
|
|
+ dev->netdev_ops = &tulip_netdev_ops;
|
|
+ dev->watchdog_timeo = TX_TIMEOUT;
|
|
+ netif_napi_add(dev, &tp->napi, tulip_poll, 16);
|
|
+ SET_ETHTOOL_OPS(dev, &ops);
|
|
+
|
|
+ if (register_netdev(dev))
|
|
+ goto err_out_free_ring;
|
|
+
|
|
+ dev_info(&dev->dev,
|
|
+ "tulip_platform (%s) at MMIO %#lx %pM, IRQ %d\n",
|
|
+ tulip_tbl[tp->chip_id].chip_name,
|
|
+ (unsigned long)dev->base_addr, dev->dev_addr, irq);
|
|
+
|
|
+ platform_set_drvdata(pdev, dev);
|
|
+ return 0;
|
|
+
|
|
+err_out_free_ring:
|
|
+ dma_free_coherent(&pdev->dev,
|
|
+ sizeof (struct tulip_rx_desc) * RX_RING_SIZE +
|
|
+ sizeof (struct tulip_tx_desc) * TX_RING_SIZE,
|
|
+ tp->rx_ring, tp->rx_ring_dma);
|
|
+ return -ENODEV;
|
|
+}
|
|
+
|
|
+static int __devexit tulip_remove(struct platform_device *pdev)
|
|
+{
|
|
+ struct net_device *dev = platform_get_drvdata (pdev);
|
|
+ struct tulip_private *tp;
|
|
+
|
|
+ if (!dev)
|
|
+ return -ENODEV;
|
|
+
|
|
+ tp = netdev_priv(dev);
|
|
+ unregister_netdev(dev);
|
|
+ dma_free_coherent(&pdev->dev,
|
|
+ sizeof (struct tulip_rx_desc) * RX_RING_SIZE +
|
|
+ sizeof (struct tulip_tx_desc) * TX_RING_SIZE,
|
|
+ tp->rx_ring, tp->rx_ring_dma);
|
|
+ iounmap(tp->base_addr);
|
|
+ free_netdev(dev);
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
+ return 0;
|
|
+}
|
|
+#endif
|
|
+
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
/*
|
|
* Polling 'interrupt' - used by things like netconsole to send skbs
|
|
@@ -2021,6 +2180,17 @@ static struct pci_driver tulip_pci_drive
|
|
};
|
|
#endif
|
|
|
|
+#ifdef CONFIG_TULIP_PLATFORM
|
|
+static struct platform_driver tulip_platform_driver = {
|
|
+ .probe = tulip_probe,
|
|
+ .remove = __devexit_p(tulip_remove),
|
|
+ .driver = {
|
|
+ .owner = THIS_MODULE,
|
|
+ .name = DRV_NAME,
|
|
+ },
|
|
+};
|
|
+#endif
|
|
+
|
|
|
|
static int __init tulip_init (void)
|
|
{
|
|
@@ -2037,6 +2207,9 @@ static int __init tulip_init (void)
|
|
#ifdef CONFIG_TULIP_PCI
|
|
ret = pci_register_driver(&tulip_pci_driver);
|
|
#endif
|
|
+#ifdef CONFIG_TULIP_PLATFORM
|
|
+ ret = platform_driver_register(&tulip_platform_driver);
|
|
+#endif
|
|
return ret;
|
|
}
|
|
|
|
@@ -2046,6 +2219,9 @@ static void __exit tulip_cleanup (void)
|
|
#ifdef CONFIG_TULIP_PCI
|
|
pci_unregister_driver (&tulip_pci_driver);
|
|
#endif
|
|
+#ifdef CONFIG_TULIP_PLATFORM
|
|
+ platform_driver_unregister (&tulip_platform_driver);
|
|
+#endif
|
|
}
|
|
|
|
|
|
--- a/drivers/net/ethernet/dec/tulip/tulip.h
|
|
+++ b/drivers/net/ethernet/dec/tulip/tulip.h
|
|
@@ -21,6 +21,8 @@
|
|
#include <linux/timer.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pci.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/platform_data/tulip.h>
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/unaligned.h>
|
|
@@ -69,28 +71,6 @@ enum tbl_flag {
|
|
};
|
|
|
|
|
|
-/* chip types. careful! order is VERY IMPORTANT here, as these
|
|
- * are used throughout the driver as indices into arrays */
|
|
-/* Note 21142 == 21143. */
|
|
-enum chips {
|
|
- DC21040 = 0,
|
|
- DC21041 = 1,
|
|
- DC21140 = 2,
|
|
- DC21142 = 3, DC21143 = 3,
|
|
- LC82C168,
|
|
- MX98713,
|
|
- MX98715,
|
|
- MX98725,
|
|
- AX88140,
|
|
- PNIC2,
|
|
- COMET,
|
|
- COMPEX9881,
|
|
- I21145,
|
|
- DM910X,
|
|
- CONEXANT,
|
|
-};
|
|
-
|
|
-
|
|
enum MediaIs {
|
|
MediaIsFD = 1,
|
|
MediaAlwaysFD = 2,
|
|
@@ -446,7 +426,12 @@ struct tulip_private {
|
|
struct mediatable *mtable;
|
|
int cur_index; /* Current media index. */
|
|
int saved_if_port;
|
|
+#ifdef CONFIG_TULIP_PCI
|
|
struct pci_dev *pdev;
|
|
+#endif
|
|
+#ifdef CONFIG_TULIP_PLATFORM
|
|
+ struct platform_device *pldev;
|
|
+#endif
|
|
int ttimer;
|
|
int susp_rx;
|
|
unsigned long nir;
|
|
--- a/drivers/net/ethernet/dec/tulip/interrupt.c
|
|
+++ b/drivers/net/ethernet/dec/tulip/interrupt.c
|
|
@@ -76,6 +76,10 @@ int tulip_refill_rx(struct net_device *d
|
|
mapping = pci_map_single(tp->pdev, skb->data, PKT_BUF_SZ,
|
|
PCI_DMA_FROMDEVICE);
|
|
#endif
|
|
+#ifdef CONFIG_TULIP_PLATFORM
|
|
+ mapping = dma_map_single(&tp->pldev->dev, skb->data, PKT_BUF_SZ,
|
|
+ DMA_FROM_DEVICE);
|
|
+#endif
|
|
tp->rx_buffers[entry].mapping = mapping;
|
|
|
|
skb->dev = dev; /* Mark as being used by this device. */
|
|
@@ -198,8 +202,7 @@ int tulip_poll(struct napi_struct *napi,
|
|
dev->stats.rx_fifo_errors++;
|
|
}
|
|
} else {
|
|
- struct sk_buff *skb;
|
|
-
|
|
+ struct sk_buff *skb;
|
|
/* Check if the packet is long enough to accept without copying
|
|
to a minimally-sized skbuff. */
|
|
if (pkt_len < tulip_rx_copybreak &&
|
|
@@ -242,6 +245,10 @@ int tulip_poll(struct napi_struct *napi,
|
|
pci_unmap_single(tp->pdev, tp->rx_buffers[entry].mapping,
|
|
PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
|
|
#endif
|
|
+#ifdef CONFIG_TULIP_PLATFORM
|
|
+ dma_unmap_single(&tp->pldev->dev, tp->rx_buffers[entry].mapping,
|
|
+ PKT_BUF_SZ, DMA_FROM_DEVICE);
|
|
+#endif
|
|
|
|
tp->rx_buffers[entry].skb = NULL;
|
|
tp->rx_buffers[entry].mapping = 0;
|
|
@@ -635,6 +642,11 @@ irqreturn_t tulip_interrupt(int irq, voi
|
|
tp->tx_buffers[entry].skb->len,
|
|
PCI_DMA_TODEVICE);
|
|
#endif
|
|
+#ifdef CONFIG_TULIP_PLATFORM
|
|
+ dma_unmap_single(&tp->pldev->dev, tp->tx_buffers[entry].mapping,
|
|
+ tp->tx_buffers[entry].skb->len,
|
|
+ DMA_TO_DEVICE);
|
|
+#endif
|
|
|
|
/* Free the original skb. */
|
|
dev_kfree_skb_irq(tp->tx_buffers[entry].skb);
|
|
--- /dev/null
|
|
+++ b/include/linux/platform_data/tulip.h
|
|
@@ -0,0 +1,31 @@
|
|
+#ifndef _LINUX_TULIP_PDATA_H
|
|
+#define _LINUX_TULIP_PDATA_H
|
|
+
|
|
+/* chip types. careful! order is VERY IMPORTANT here, as these
|
|
+ * are used throughout the driver as indices into arrays */
|
|
+/* Note 21142 == 21143. */
|
|
+enum chips {
|
|
+ DC21040 = 0,
|
|
+ DC21041 = 1,
|
|
+ DC21140 = 2,
|
|
+ DC21142 = 3, DC21143 = 3,
|
|
+ LC82C168,
|
|
+ MX98713,
|
|
+ MX98715,
|
|
+ MX98725,
|
|
+ AX88140,
|
|
+ PNIC2,
|
|
+ COMET,
|
|
+ COMPEX9881,
|
|
+ I21145,
|
|
+ DM910X,
|
|
+ CONEXANT,
|
|
+ ADM8668,
|
|
+};
|
|
+
|
|
+struct tulip_platform_data {
|
|
+ u8 mac[6];
|
|
+ enum chips chip_id;
|
|
+};
|
|
+
|
|
+#endif
|