mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-27 13:06:49 +02:00
4cc612872a
The patch taken from the linux-mips mailing list. The Kernel hangs occasionally during boot after "Calibrating delay loop..". This is caused by the c0_compare_int_usable() routine in cevt-r4k.c returning false which causes the system to disable the timer and hang later. The false return happens because the routine is using a series of four calls to irq_disable_hazard() as a delay while it waits for the timer changes to propagate to the cp0 cause register. On newer MIPS cores, like the 74K, the series of irq_disable_hazard() calls turn into ehb instructions and can take as little as a few clock ticks for all 4 instructions. This is not enough of a delay, so the routine thinks the timer is not working. This fix uses up to a max number of cycle counter ticks for the delay and uses back_to_back_c0_hazard() instead of irq_disable_hazard() to handle the hazard condition between cp0 writes and cp0 reads. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29009 3c298f89-4303-0410-b956-a3cf2f4a3e73
105 lines
3.6 KiB
Diff
105 lines
3.6 KiB
Diff
From patchwork Tue Nov 8 14:59:01 2011
|
|
Content-Type: text/plain; charset="utf-8"
|
|
MIME-Version: 1.0
|
|
Content-Transfer-Encoding: 7bit
|
|
Subject: MIPS: Kernel hangs occasionally during boot.
|
|
Date: Tue, 08 Nov 2011 13:59:01 -0000
|
|
From: Al Cooper <alcooperx@gmail.com>
|
|
X-Patchwork-Id: 2911
|
|
Message-Id: <1320764341-4275-1-git-send-email-alcooperx@gmail.com>
|
|
To: ralf@linux-mips.org, linux-mips@linux-mips.org,
|
|
linux-kernel@vger.kernel.org
|
|
Cc: "Al Cooper" <alcooperx@gmail.com>
|
|
|
|
The Kernel hangs occasionally during boot after
|
|
"Calibrating delay loop..". This is caused by the
|
|
c0_compare_int_usable() routine in cevt-r4k.c returning false which
|
|
causes the system to disable the timer and hang later. The false
|
|
return happens because the routine is using a series of four calls to
|
|
irq_disable_hazard() as a delay while it waits for the timer changes
|
|
to propagate to the cp0 cause register. On newer MIPS cores, like the 74K,
|
|
the series of irq_disable_hazard() calls turn into ehb instructions and
|
|
can take as little as a few clock ticks for all 4 instructions. This
|
|
is not enough of a delay, so the routine thinks the timer is not working.
|
|
This fix uses up to a max number of cycle counter ticks for the delay
|
|
and uses back_to_back_c0_hazard() instead of irq_disable_hazard() to
|
|
handle the hazard condition between cp0 writes and cp0 reads.
|
|
|
|
Signed-off-by: Al Cooper <alcooperx@gmail.com>
|
|
|
|
---
|
|
arch/mips/kernel/cevt-r4k.c | 38 +++++++++++++++++++-------------------
|
|
1 files changed, 19 insertions(+), 19 deletions(-)
|
|
|
|
--- a/arch/mips/kernel/cevt-r4k.c
|
|
+++ b/arch/mips/kernel/cevt-r4k.c
|
|
@@ -103,19 +103,10 @@ static int c0_compare_int_pending(void)
|
|
|
|
/*
|
|
* Compare interrupt can be routed and latched outside the core,
|
|
- * so a single execution hazard barrier may not be enough to give
|
|
- * it time to clear as seen in the Cause register. 4 time the
|
|
- * pipeline depth seems reasonably conservative, and empirically
|
|
- * works better in configurations with high CPU/bus clock ratios.
|
|
+ * so wait up to worst case number of cycle counter ticks for timer interrupt
|
|
+ * changes to propagate to the cause register.
|
|
*/
|
|
-
|
|
-#define compare_change_hazard() \
|
|
- do { \
|
|
- irq_disable_hazard(); \
|
|
- irq_disable_hazard(); \
|
|
- irq_disable_hazard(); \
|
|
- irq_disable_hazard(); \
|
|
- } while (0)
|
|
+#define COMPARE_INT_SEEN_TICKS 50
|
|
|
|
int c0_compare_int_usable(void)
|
|
{
|
|
@@ -126,8 +117,12 @@ int c0_compare_int_usable(void)
|
|
* IP7 already pending? Try to clear it by acking the timer.
|
|
*/
|
|
if (c0_compare_int_pending()) {
|
|
- write_c0_compare(read_c0_count());
|
|
- compare_change_hazard();
|
|
+ cnt = read_c0_count();
|
|
+ write_c0_compare(cnt);
|
|
+ back_to_back_c0_hazard();
|
|
+ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
|
|
+ if (!c0_compare_int_pending())
|
|
+ break;
|
|
if (c0_compare_int_pending())
|
|
return 0;
|
|
}
|
|
@@ -136,7 +131,7 @@ int c0_compare_int_usable(void)
|
|
cnt = read_c0_count();
|
|
cnt += delta;
|
|
write_c0_compare(cnt);
|
|
- compare_change_hazard();
|
|
+ back_to_back_c0_hazard();
|
|
if ((int)(read_c0_count() - cnt) < 0)
|
|
break;
|
|
/* increase delta if the timer was already expired */
|
|
@@ -145,12 +140,17 @@ int c0_compare_int_usable(void)
|
|
while ((int)(read_c0_count() - cnt) <= 0)
|
|
; /* Wait for expiry */
|
|
|
|
- compare_change_hazard();
|
|
+ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
|
|
+ if (c0_compare_int_pending())
|
|
+ break;
|
|
if (!c0_compare_int_pending())
|
|
return 0;
|
|
-
|
|
- write_c0_compare(read_c0_count());
|
|
- compare_change_hazard();
|
|
+ cnt = read_c0_count();
|
|
+ write_c0_compare(cnt);
|
|
+ back_to_back_c0_hazard();
|
|
+ while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS))
|
|
+ if (!c0_compare_int_pending())
|
|
+ break;
|
|
if (c0_compare_int_pending())
|
|
return 0;
|
|
|