mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-25 04:11:54 +02:00
c3831d0284
Conditionally apply ldd and ldconfig support on at91 platform git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6862 3c298f89-4303-0410-b956-a3cf2f4a3e73
58 lines
1.8 KiB
Diff
58 lines
1.8 KiB
Diff
diff -uNr romboot/main.cpp romboot.new/main.cpp
|
|
--- romboot/main.cpp 2004-07-16 17:10:04.000000000 +0200
|
|
+++ romboot.new/main.cpp 2006-03-03 02:27:37.000000000 +0100
|
|
@@ -23,12 +23,12 @@
|
|
#define AT91C_UBOOT_DATAFLASH_ADDR 0xC0008000
|
|
|
|
// crystal= 18.432MHz
|
|
-//#define AT91C_PLLA_VALUE 0x2026BE04 // -> 179.712MHz
|
|
-//#define AT91C_PLLA_MCK 0x0000202
|
|
+#define AT91C_PLLA_VALUE 0x2026BE04 // -> 179.712MHz
|
|
+#define AT91C_PLLA_MCK 0x0000202
|
|
|
|
// crystal= 20.000MHz
|
|
-#define AT91C_PLLA_VALUE 0x2023BE04 // -> 180MHz
|
|
-#define AT91C_PLLA_MCK 0x0000202
|
|
+//#define AT91C_PLLA_VALUE 0x2023BE04 // -> 180MHz
|
|
+//#define AT91C_PLLA_MCK 0x0000202
|
|
|
|
#define DELAY_MAIN_FREQ 1000
|
|
#define DISP_LINE_LEN 16
|
|
@@ -151,7 +151,7 @@
|
|
//*-----------------------------------------------------------------------------
|
|
void AT91F_DisplayMenu(void)
|
|
{
|
|
- printf("\n\rATMEL LOADER %s %s %s\n\r", AT91C_VERSION, __DATE__, __TIME__);
|
|
+ printf("\n\rFDL LOADER %s %s %s\n\r", AT91C_VERSION, __DATE__, __TIME__);
|
|
printf(menu_separ);
|
|
AT91F_DataflashPrintInfo();
|
|
printf(menu_separ);
|
|
@@ -306,6 +306,19 @@
|
|
AT91F_SetPLL();
|
|
}
|
|
|
|
+void LedCode(void)
|
|
+{
|
|
+ int *pRegister;
|
|
+ pRegister = (int *)0xFFFFF800; // Enable port C peripheral reg
|
|
+ *pRegister = 0x3c00;
|
|
+ pRegister = (int *)0xFFFFF810; // Output Enable reg
|
|
+ *pRegister = 0x3c00;
|
|
+ pRegister = (int *)0xFFFFF830; // Set data
|
|
+ *pRegister = 0x1400;
|
|
+ pRegister = (int *)0xFFFFF834; // Clear bits
|
|
+ *pRegister = 0x2800;
|
|
+}
|
|
+
|
|
void AT91F_StartUboot(unsigned int dummy, void *pvoid)
|
|
{
|
|
printf("Load U-BOOT from dataflash[%x] to SDRAM[%x]\n\r", AT91C_UBOOT_DATAFLASH_ADDR, AT91C_UBOOT_ADDR);
|
|
@@ -313,6 +326,7 @@
|
|
printf("Set PLLA to 180Mhz and Master clock to 60Mhz and start U-BOOT\n\r");
|
|
//* Reset registers
|
|
AT91F_ResetRegisters();
|
|
+ LedCode();
|
|
Jump(AT91C_UBOOT_ADDR);
|
|
while(1);
|
|
}
|