qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-11 09:35:01 +02:00
Code
f877fc28f8
openwrt-xburst/package/strongswan/patches/210-updown.patch
nbd b5cb1795de refresh all package patches in the buildroot using quilt 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@7490 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-06-04 11:25:53 +00:00

663 lines
19 KiB
Diff
Raw Blame History

Index: strongswan-2.8.2/programs/_updown/_updown.8
===================================================================
--- strongswan-2.8.2.orig/programs/_updown/_updown.8 2007-06-04 13:23:04.632029720 +0200
+++ strongswan-2.8.2/programs/_updown/_updown.8 2007-06-04 13:23:06.656721920 +0200
@@ -8,8 +8,23 @@
.I _updown
is invoked by pluto when it has brought up a new connection. This script
is used to insert the appropriate routing entries for IPsec operation.
-It can also be used to insert and delete dynamic iptables firewall rules.
-The interface to the script is documented in the pluto man page.
+It also inserts and deletes dynamic iptables firewall rules. IMPORTANT!
+By default, it will ACCEPT as appropriate on the INPUT, OUTPUT, FORWARD
+tables. Most distributions will want to change that to provide more
+flexibility in their firewall configuration.
+The script looks for the environment variables
+.B IPSEC_UPDOWN_RULE_IN
+for the iptables table it should insert into,
+.B IPSEC_UPDOWN_DEST_IN
+for where the rule should -j jump to,
+.B IPSEC_UPDOWN_RULE_OUT
+.B IPSEC_UPDOWN_DEST_OUT
+for the same on outgoing packets, and
+.B IPSEC_UPDOWN_FWD_RULE_IN
+.B IPSEC_UPDOWN_FWD_DEST_IN
+.B IPSEC_UPDOWN_FWD_RULE_OUT
+.B IPSEC_UPDOWN_FWD_DEST_OUT
+respectively for packets being forwarded to/from the local networks.
.SH "SEE ALSO"
ipsec(8), ipsec_pluto(8).
.SH HISTORY
Index: strongswan-2.8.2/programs/_updown/_updown.in
===================================================================
--- strongswan-2.8.2.orig/programs/_updown/_updown.in 2007-06-04 13:23:04.642028200 +0200
+++ strongswan-2.8.2/programs/_updown/_updown.in 2007-06-04 13:23:06.657721768 +0200
@@ -5,6 +5,7 @@
# Copyright (C) 2003-2004 Tuomo Soini
# Copyright (C) 2002-2004 Michael Richardson
# Copyright (C) 2005-2006 Andreas Steffen <andreas.steffen@strongswan.org>
+# Copyright (C) 2007 Kevin Cody Jr <kcody@vegaresearch.com>
#
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the
@@ -118,20 +119,61 @@
# restricted on the peer side.
#
-# uncomment to log VPN connections
-VPN_LOGGING=1
-#
+# set to /bin/true to silence log messages
+LOGGER=logger
+
# tag put in front of each log entry:
TAG=vpn
-#
+
# syslog facility and priority used:
-FAC_PRIO=local0.notice
-#
-# to create a special vpn logging file, put the following line into
-# the syslog configuration file /etc/syslog.conf:
-#
-# local0.notice -/var/log/vpn
-#
+FAC_PRIO=authpriv.info
+
+
+# in the presence of KLIPS and ipsecN interfaces do not use IPSEC_POLICY
+if [ `echo "$PLUTO_INTERFACE" | grep "ipsec"` ] ; then
+ IPSEC_POLICY_IN=""
+ IPSEC_POLICY_OUT=""
+else
+ IPSEC_POLICY="-m policy --pol ipsec --proto esp --reqid $PLUTO_REQID"
+ IPSEC_POLICY_IN="$IPSEC_POLICY --dir in"
+ IPSEC_POLICY_OUT="$IPSEC_POLICY --dir out"
+fi
+
+# are there port numbers?
+if [ "$PLUTO_MY_PORT" != 0 ] ; then
+ S_MY_PORT="--sport $PLUTO_MY_PORT"
+ D_MY_PORT="--dport $PLUTO_MY_PORT"
+fi
+
+if [ "$PLUTO_PEER_PORT" != 0 ] ; then
+ S_PEER_PORT="--sport $PLUTO_PEER_PORT"
+ D_PEER_PORT="--dport $PLUTO_PEER_PORT"
+fi
+
+# import firewall behavior
+IPT_RULE_IN=$IPSEC_UPDOWN_RULE_IN
+IPT_DEST_IN=$IPSEC_UPDOWN_DEST_IN
+IPT_RULE_OUT=$IPSEC_UPDOWN_RULE_OUT
+IPT_DEST_OUT=$IPSEC_UPDOWN_DEST_OUT
+
+# import forwarding behavior
+FWD_RULE_IN=$IPSEC_UPDOWN_FWD_RULE_IN
+FWD_DEST_IN=$IPSEC_UPDOWN_FWD_DEST_IN
+FWD_RULE_OUT=$IPSEC_UPDOWN_FWD_RULE_OUT
+FWD_DEST_OUT=$IPSEC_UPDOWN_FWD_DEST_OUT
+
+# default firewall behavior
+[ -z "$IPT_RULE_IN" ] && IPT_RULE_IN=INPUT
+[ -z "$IPT_DEST_IN" ] && IPT_DEST_IN=ACCEPT
+[ -z "$IPT_RULE_OUT" ] && IPT_RULE_OUT=OUTPUT
+[ -z "$IPT_DEST_OUT" ] && IPT_DEST_OUT=ACCEPT
+
+# default forwarding behavior
+[ -z "$FWD_RULE_IN" ] && FWD_RULE_IN=FORWARD
+[ -z "$FWD_DEST_IN" ] && FWD_DEST_IN=ACCEPT
+[ -z "$FWD_RULE_OUT" ] && FWD_RULE_OUT=FORWARD
+[ -z "$FWD_DEST_OUT" ] && FWD_DEST_OUT=ACCEPT
+
# check interface version
case "$PLUTO_VERSION" in
@@ -150,8 +192,6 @@
case "$1:$*" in
':') # no parameters
;;
-iptables:iptables) # due to (left/right)firewall; for default script only
- ;;
custom:*) # custom parameters (see above CAUTION comment)
;;
*) echo "$0: unknown parameters \`$*'" >&2
@@ -159,345 +199,307 @@
;;
esac
+
# utility functions for route manipulation
# Meddling with this stuff should not be necessary and requires great care.
+
uproute() {
doroute add
ip route flush cache
}
+
downroute() {
doroute delete
ip route flush cache
}
+upfirewall() {
+ in_rule=$1
+ in_dest=$2
+ out_rule=$3
+ out_dest=$4
+
+ [ -n "$in_rule" -a -n "$in_dest" ] && \
+ iptables -I $in_rule 1 \
+ -i $PLUTO_INTERFACE \
+ -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_MY_CLIENT $D_MY_PORT \
+ $IPSEC_POLICY_IN \
+ -j $in_dest
+
+ [ -n "$out_rule" -a -n "$out_dest" ] && \
+ iptables -I $out_rule 1 \
+ -o $PLUTO_INTERFACE \
+ -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_MY_CLIENT $S_MY_PORT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT \
+ $IPSEC_POLICY_OUT \
+ -j $out_dest
+
+}
+
+downfirewall() {
+ in_rule=$1
+ in_dest=$2
+ out_rule=$3
+ out_dest=$4
+
+ [ -n "$in_rule" -a -n "$in_dest" ] && \
+ iptables -D $in_rule \
+ -i $PLUTO_INTERFACE \
+ -p $PLUTO_MY_PROTOCOL \
+ -s $PLUTO_PEER_CLIENT $S_PEER_PORT \
+ -d $PLUTO_MY_CLIENT $D_MY_PORT \
+ $IPSEC_POLICY_IN \
+ -j $in_dest
+
+ [ -n "$out_rule" -a -n "$out_dest" ] && \
+ iptables -D $out_rule \
+ -o $PLUTO_INTERFACE \
+ -p $PLUTO_PEER_PROTOCOL \
+ -s $PLUTO_MY_CLIENT $S_MY_PORT \
+ -d $PLUTO_PEER_CLIENT $D_PEER_PORT \
+ $IPSEC_POLICY_OUT \
+ -j $out_dest
+
+}
+
addsource() {
st=0
- if ! ip -o route get ${PLUTO_MY_SOURCEIP%/*} | grep -q ^local
- then
+
+ if ! ip -o route get ${PLUTO_MY_SOURCEIP%/*} | grep -q ^local ; then
+
it="ip addr add ${PLUTO_MY_SOURCEIP%/*}/32 dev $PLUTO_INTERFACE"
oops="`eval $it 2>&1`"
st=$?
- if test " $oops" = " " -a " $st" != " 0"
- then
+
+ if [ " $oops" = " " -a " $st" != " 0" ] ; then
oops="silent error, exit status $st"
fi
- if test " $oops" != " " -o " $st" != " 0"
- then
+
+ if [ " $oops" != " " -o " $st" != " 0" ] ; then
echo "$0: addsource \`$it' failed ($oops)" >&2
fi
fi
+
return $st
}
doroute() {
st=0
parms="$PLUTO_PEER_CLIENT"
+ parms2="dev $PLUTO_INTERFACE"
- parms2=
- if [ -n "$PLUTO_NEXT_HOP" ]
- then
- parms2="via $PLUTO_NEXT_HOP"
- fi
- parms2="$parms2 dev $PLUTO_INTERFACE"
-
- if [ -z "$PLUTO_MY_SOURCEIP" ]
- then
- if [ -f /etc/sysconfig/defaultsource ]
- then
- . /etc/sysconfig/defaultsource
- fi
+ if [ -z "$PLUTO_MY_SOURCEIP" ] ; then
- if [ -f /etc/conf.d/defaultsource ]
- then
- . /etc/conf.d/defaultsource
- fi
+ [ -f /etc/sysconfig/defaultsource ] && \
+ . /etc/sysconfig/defaultsource
+
+ [ -f /etc/conf.d/defaultsource ] && \
+ . /etc/conf.d/defaultsource
+
+ [ -n "$DEFAULTSOURCE" ] && \
+ PLUTO_MY_SOURCEIP=$DEFAULTSOURCE
- if [ -n "$DEFAULTSOURCE" ]
- then
- PLUTO_MY_SOURCEIP=$DEFAULTSOURCE
- fi
fi
parms3=
- if test "$1" = "add" -a -n "$PLUTO_MY_SOURCEIP"
- then
+ if [ "$1" = "add" -a -n "$PLUTO_MY_SOURCEIP" ] ; then
addsource
parms3="$parms3 src ${PLUTO_MY_SOURCEIP%/*}"
fi
- case "$PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK" in
- "0.0.0.0/0.0.0.0")
+ if [ "$PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK" = \
+ "0.0.0.0/0.0.0.0" ] ; then
# opportunistic encryption work around
# need to provide route that eclipses default, without
# replacing it.
- it="ip route $1 0.0.0.0/1 $parms2 $parms3 &&
- ip route $1 128.0.0.0/1 $parms2 $parms3"
- ;;
- *) it="ip route $1 $parms $parms2 $parms3"
- ;;
- esac
+ it="ip route $1 0.0.0.0/1 $parms2 $parms3 &&
+ ip route $1 128.0.0.0/1 $parms2 $parms3"
+ else
+ it="ip route $1 $parms $parms2 $parms3"
+ fi
+
oops="`eval $it 2>&1`"
st=$?
- if test " $oops" = " " -a " $st" != " 0"
- then
- oops="silent error, exit status $st"
- fi
- if test " $oops" != " " -o " $st" != " 0"
- then
- echo "$0: doroute \`$it' failed ($oops)" >&2
+
+ if [ " $oops" = " " -a " $st" != " 0" ] ; then
+ oops="silent error, exit status $st"
fi
+
+ if [ " $oops" != " " -o " $st" != " 0" ] ; then
+ echo "$0: doroute \`$it' failed ($oops)" >&2
+ fi
+
return $st
}
-
-# in the presence of KLIPS and ipsecN interfaces do not use IPSEC_POLICY
-if [ `echo "$PLUTO_INTERFACE" | grep "ipsec"` ]
-then
- IPSEC_POLICY_IN=""
- IPSEC_POLICY_OUT=""
-else
- IPSEC_POLICY="-m policy --pol ipsec --proto esp --reqid $PLUTO_REQID"
- IPSEC_POLICY_IN="$IPSEC_POLICY --dir in"
- IPSEC_POLICY_OUT="$IPSEC_POLICY --dir out"
-fi
-# are there port numbers?
-if [ "$PLUTO_MY_PORT" != 0 ]
-then
- S_MY_PORT="--sport $PLUTO_MY_PORT"
- D_MY_PORT="--dport $PLUTO_MY_PORT"
-fi
-if [ "$PLUTO_PEER_PORT" != 0 ]
-then
- S_PEER_PORT="--sport $PLUTO_PEER_PORT"
- D_PEER_PORT="--dport $PLUTO_PEER_PORT"
-fi
+dologentry() {
+ action=$1
+
+ if [ "$PLUTO_PEER_CLIENT" == "$PLUTO_PEER/32" ] ; then
+ rem="$PLUTO_PEER"
+ else
+ rem="$PLUTO_PEER_CLIENT == $PLUTO_PEER"
+ fi
+
+ if [ "$PLUTO_MY_CLIENT" == "$PLUTO_ME/32" ] ; then
+ loc="$PLUTO_ME"
+ else
+ loc="$PLUTO_ME == $PLUTO_MY_CLIENT"
+ fi
+
+ $LOGGER -t $TAG -p $FAC_PRIO "$action $rem -- $loc ($PLUTO_PEER_ID)"
+}
+
# the big choice
+
case "$PLUTO_VERB:$1" in
prepare-host:*|prepare-client:*)
# delete possibly-existing route (preliminary to adding a route)
- case "$PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK" in
- "0.0.0.0/0.0.0.0")
- # need to provide route that eclipses default, without
+
+ if [ "$PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK" = \
+ "0.0.0.0/0.0.0.0" ] ; then
+ # need to remove the route that eclipses default, without
# replacing it.
- parms1="0.0.0.0/1"
- parms2="128.0.0.0/1"
- it="ip route delete $parms1 2>&1 ; ip route delete $parms2 2>&1"
- oops="`ip route delete $parms1 2>&1 ; ip route delete $parms2 2>&1`"
- ;;
- *)
- parms="$PLUTO_PEER_CLIENT"
- it="ip route delete $parms 2>&1"
- oops="`ip route delete $parms 2>&1`"
- ;;
- esac
- status="$?"
- if test " $oops" = " " -a " $status" != " 0"
- then
- oops="silent error, exit status $status"
+ it="( ip route delete 0.0.0.0/1 ;
+ ip route delete 128.0.0.0/1 )"
+ else
+ it="ip route delete $PLUTO_PEER_CLIENT"
+ fi
+
+ oops="`$it 2>&1`"
+ st="$?"
+
+ if [ " $oops" = " " -a " $st" != " 0" ] ; then
+ oops="silent error, exit status $st"
fi
+
case "$oops" in
*'RTNETLINK answers: No such process'*)
# This is what route (currently -- not documented!) gives
# for "could not find such a route".
oops=
- status=0
+ st=0
;;
esac
- if test " $oops" != " " -o " $status" != " 0"
- then
+
+ if [ " $oops" != " " -o " $st" != " 0" ] ; then
echo "$0: \`$it' failed ($oops)" >&2
fi
- exit $status
+
+ exit $st
+
;;
route-host:*|route-client:*)
# connection to me or my client subnet being routed
+
+ ipsec _showstatus valid
uproute
+
;;
unroute-host:*|unroute-client:*)
# connection to me or my client subnet being unrouted
+
+ ipsec _showstatus invalid
downroute
+
;;
-up-host:)
+up-host:*)
# connection to me coming up
- # If you are doing a custom version, firewall commands go here.
+
+ ipsec _showstatus up
+ upfirewall $IPT_RULE_IN $IPT_DEST_IN $IPT_RULE_OUT $OUT_DEST_OUT
+ dologentry "VPN-UP"
+
;;
-down-host:)
+down-host:*)
# connection to me going down
- # If you are doing a custom version, firewall commands go here.
- ;;
-up-client:)
- # connection to my client subnet coming up
- # If you are doing a custom version, firewall commands go here.
- ;;
-down-client:)
- # connection to my client subnet going down
- # If you are doing a custom version, firewall commands go here.
+
+ ipsec _showstatus down
+ downfirewall $IPT_RULE_IN $IPT_DEST_IN $IPT_RULE_OUT $OUT_DEST_OUT
+ dologentry "VPN-DN"
+
;;
-up-host:iptables)
- # connection to me, with (left/right)firewall=yes, coming up
- # This is used only by the default updown script, not by your custom
- # ones, so do not mess with it; see CAUTION comment up at top.
- iptables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
- -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
- -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
- iptables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
- -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
- -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT -j ACCEPT
- #
- # log IPsec host connection setup
- if [ $VPN_LOGGING ]
- then
- if [ "$PLUTO_PEER_CLIENT" == "$PLUTO_PEER/32" ]
- then
- logger -t $TAG -p $FAC_PRIO \
- "+ `echo -e $PLUTO_PEER_ID` $PLUTO_PEER -- $PLUTO_ME"
- else
- logger -t $TAG -p $FAC_PRIO \
- "+ `echo -e $PLUTO_PEER_ID` $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
- fi
- fi
- ;;
-down-host:iptables)
- # connection to me, with (left/right)firewall=yes, going down
- # This is used only by the default updown script, not by your custom
- # ones, so do not mess with it; see CAUTION comment up at top.
- iptables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
- -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
- -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
- iptables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
- -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
- -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT -j ACCEPT
- #
- # log IPsec host connection teardown
- if [ $VPN_LOGGING ]
- then
- if [ "$PLUTO_PEER_CLIENT" == "$PLUTO_PEER/32" ]
- then
- logger -t $TAG -p $FAC_PRIO -- \
- "- `echo -e $PLUTO_PEER_ID` $PLUTO_PEER -- $PLUTO_ME"
- else
- logger -t $TAG -p $FAC_PRIO -- \
- "- `echo -e $PLUTO_PEER_ID` $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
- fi
- fi
- ;;
-up-client:iptables)
- # connection to client subnet, with (left/right)firewall=yes, coming up
- # This is used only by the default updown script, not by your custom
- # ones, so do not mess with it; see CAUTION comment up at top.
- if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ]
- then
- iptables -I FORWARD 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
- -s $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $S_MY_PORT \
- -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT \
- $IPSEC_POLICY_OUT -j ACCEPT
- iptables -I FORWARD 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
- -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
- -d $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $D_MY_PORT \
- $IPSEC_POLICY_IN -j ACCEPT
+up-client:*)
+ # connection to client subnet coming up
+
+ ipsec _showstatus up
+
+ if [ "$PLUTO_MY_CLIENT" != "$PLUTO_ME/32" -a \
+ "$PLUTO_MY_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ] ; then
+ upfirewall $FWD_RULE_IN $FWD_DEST_IN $FWD_RULE_OUT $FWD_DEST_OUT
fi
- #
+
# a virtual IP requires an INPUT and OUTPUT rule on the host
# or sometimes host access via the internal IP is needed
- if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
- then
- iptables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
- -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
- -d $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $D_MY_PORT \
- $IPSEC_POLICY_IN -j ACCEPT
- iptables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
- -s $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $S_MY_PORT \
- -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT \
- $IPSEC_POLICY_OUT -j ACCEPT
- fi
- #
- # log IPsec client connection setup
- if [ $VPN_LOGGING ]
- then
- if [ "$PLUTO_PEER_CLIENT" == "$PLUTO_PEER/32" ]
- then
- logger -t $TAG -p $FAC_PRIO \
- "+ `echo -e $PLUTO_PEER_ID` $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
- else
- logger -t $TAG -p $FAC_PRIO \
- "+ `echo -e $PLUTO_PEER_ID` $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
- fi
- fi
- ;;
-down-client:iptables)
- # connection to client subnet, with (left/right)firewall=yes, going down
- # This is used only by the default updown script, not by your custom
- # ones, so do not mess with it; see CAUTION comment up at top.
- if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ]
- then
- iptables -D FORWARD -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
- -s $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $S_MY_PORT \
- -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT \
- $IPSEC_POLICY_OUT -j ACCEPT
- iptables -D FORWARD -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
- -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
- -d $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $D_MY_PORT \
- $IPSEC_POLICY_IN -j ACCEPT
+ if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ] ; then
+ upfirewall $IPT_RULE_IN $IPT_DEST_IN $IPT_RULE_OUT $OUT_DEST_OUT
+ fi
+
+ dologentry "VPN-UP"
+
+ ;;
+down-client:*)
+ # connection to client subnet going down
+
+ ipsec _showstatus down
+
+ if [ "$PLUTO_MY_CLIENT" != "$PLUTO_ME/32" -a \
+ "$PLUTO_MY_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ] ; then
+ downfirewall $FWD_RULE_IN $FWD_DEST_IN $FWD_RULE_OUT $FWD_DEST_OUT
fi
- #
+
# a virtual IP requires an INPUT and OUTPUT rule on the host
# or sometimes host access via the internal IP is needed
- if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
- then
- iptables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
- -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
- -d $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $D_MY_PORT \
- $IPSEC_POLICY_IN -j ACCEPT
- iptables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
- -s $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $S_MY_PORT \
- -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT \
- $IPSEC_POLICY_OUT -j ACCEPT
- fi
- #
- # log IPsec client connection teardown
- if [ $VPN_LOGGING ]
- then
- if [ "$PLUTO_PEER_CLIENT" == "$PLUTO_PEER/32" ]
- then
- logger -t $TAG -p $FAC_PRIO -- \
- "- `echo -e $PLUTO_PEER_ID` $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
- else
- logger -t $TAG -p $FAC_PRIO -- \
- "- `echo -e $PLUTO_PEER_ID` $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
- fi
+ if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ] ; then
+ downfirewall $IPT_RULE_IN $IPT_DEST_IN $IPT_RULE_OUT $OUT_DEST_OUT
fi
+
+ dologentry "VPN-DN"
+
;;
-#
-# IPv6
-#
prepare-host-v6:*|prepare-client-v6:*)
+
;;
route-host-v6:*|route-client-v6:*)
# connection to me or my client subnet being routed
+
#uproute_v6
+
;;
unroute-host-v6:*|unroute-client-v6:*)
# connection to me or my client subnet being unrouted
+
#downroute_v6
+
;;
up-host-v6:*)
# connection to me coming up
# If you are doing a custom version, firewall commands go here.
+
;;
down-host-v6:*)
# connection to me going down
# If you are doing a custom version, firewall commands go here.
+
;;
up-client-v6:)
# connection to my client subnet coming up
# If you are doing a custom version, firewall commands go here.
+
;;
down-client-v6:)
# connection to my client subnet going down
# If you are doing a custom version, firewall commands go here.
+
;;
-*) echo "$0: unknown verb \`$PLUTO_VERB' or parameter \`$1'" >&2
+*)
+ echo "$0: unknown verb \`$PLUTO_VERB' or parameter \`$1'" >&2
exit 1
+
;;
esac
+
View Git Blame Copy Permalink