qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-14 14:45:20 +02:00
Code
fa0e25197e
openwrt-xburst/target/linux/brcm63xx/patches-2.6.37/180-udc_preliminary_support.patch
hauke 374bb82f67 brcm47xx: add fallback sprom for pci devices without an own sprom. 
If there is no sprom on an ssb based pci device on the brcm47xx
architecture ssb now asks the architecture code to look into the nvram
to get some sprom data for this device. Now we are able to read out
pci/1/1/ foo or pci/1/3/ foo config options.

This will fix some problems where the wireless devices does not got an 
mac address and the following message was show:
ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26801 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-01 20:28:35 +00:00

244 lines
7.7 KiB
Diff
Raw Blame History

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -29,6 +29,7 @@
#include <bcm63xx_dev_pcmcia.h>
#include <bcm63xx_dev_usb_ohci.h>
#include <bcm63xx_dev_usb_ehci.h>
+#include <bcm63xx_dev_usb_udc.h>
#include <board_bcm963xx.h>
#define PFX "board_bcm963xx: "
@@ -400,6 +401,8 @@ static struct board_info __initdata boar
.has_ohci0 = 1,
.has_pccard = 1,
.has_ehci0 = 1,
+
+ .has_udc0 = 1,
};
static struct board_info __initdata board_rta1025w_16 = {
@@ -1002,6 +1005,9 @@ int __init board_register_devices(void)
if (board.has_dsp)
bcm63xx_dsp_register(&board.dsp);
+ if (board.has_udc0)
+ bcm63xx_udc_register();
+
/* read base address of boot chip select (0) */
if (BCMCPU_IS_6345())
val = 0x1fc00000;
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-usb-udc.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2009 Henk Vergonet <Henk.Vergonet@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <bcm63xx_cpu.h>
+
+static struct resource udc_resources[] = {
+ {
+ .start = -1, /* filled at runtime */
+ .end = -1, /* filled at runtime */
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = -1, /* filled at runtime */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 udc_dmamask = ~(u32)0;
+
+static struct platform_device bcm63xx_udc_device = {
+ .name = "bcm63xx-udc",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(udc_resources),
+ .resource = udc_resources,
+ .dev = {
+ .dma_mask = &udc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+int __init bcm63xx_udc_register(void)
+{
+ if (!BCMCPU_IS_6338() && !BCMCPU_IS_6345() && !BCMCPU_IS_6348())
+ return 0;
+
+ udc_resources[0].start = bcm63xx_regset_address(RSET_UDC0);
+ udc_resources[0].end = udc_resources[0].start;
+ udc_resources[0].end += RSET_UDC_SIZE - 1;
+ udc_resources[1].start = bcm63xx_get_irq_number(IRQ_UDC0);
+ return platform_device_register(&bcm63xx_udc_device);
+}
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
@@ -127,7 +127,7 @@ enum bcm63xx_regs_set {
#define BCM_6338_UART1_BASE (0xdeadbeef)
#define BCM_6338_GPIO_BASE (0xfffe0400)
#define BCM_6338_SPI_BASE (0xfffe0c00)
-#define BCM_6338_UDC0_BASE (0xdeadbeef)
+#define BCM_6338_UDC0_BASE (0xfffe3000)
#define BCM_6338_USBDMA_BASE (0xfffe2400)
#define BCM_6338_OHCI0_BASE (0xdeadbeef)
#define BCM_6338_OHCI_PRIV_BASE (0xfffe3000)
@@ -158,7 +158,7 @@ enum bcm63xx_regs_set {
#define BCM_6345_UART1_BASE (0xdeadbeef)
#define BCM_6345_GPIO_BASE (0xfffe0400)
#define BCM_6345_SPI_BASE (0xdeadbeef)
-#define BCM_6345_UDC0_BASE (0xdeadbeef)
+#define BCM_6345_UDC0_BASE (0xfffe2100)
#define BCM_6345_USBDMA_BASE (0xfffe2800)
#define BCM_6345_ENET0_BASE (0xfffe1800)
#define BCM_6345_ENETDMA_BASE (0xfffe2800)
@@ -215,7 +215,7 @@ enum bcm63xx_regs_set {
#define BCM_6358_UART1_BASE (0xfffe0120)
#define BCM_6358_GPIO_BASE (0xfffe0080)
#define BCM_6358_SPI_BASE (0xdeadbeef)
-#define BCM_6358_UDC0_BASE (0xfffe0800)
+#define BCM_6358_UDC0_BASE (0xfffe0400)
#define BCM_6358_OHCI0_BASE (0xfffe1400)
#define BCM_6358_OHCI_PRIV_BASE (0xdeadbeef)
#define BCM_6358_USBH_PRIV_BASE (0xfffe1500)
@@ -444,6 +444,7 @@ enum bcm63xx_irq {
IRQ_UART0,
IRQ_UART1,
IRQ_DSL,
+ IRQ_UDC0,
IRQ_ENET0,
IRQ_ENET1,
IRQ_ENET_PHY,
@@ -486,7 +487,7 @@ enum bcm63xx_irq {
#define BCM_6345_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
#define BCM_6345_DSL_IRQ (IRQ_INTERNAL_BASE + 3)
#define BCM_6345_ATM_IRQ (IRQ_INTERNAL_BASE + 4)
-#define BCM_6345_USB_IRQ (IRQ_INTERNAL_BASE + 5)
+#define BCM_6345_UDC0_IRQ (IRQ_INTERNAL_BASE + 5)
#define BCM_6345_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
#define BCM_6345_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12)
#define BCM_6345_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 13 + 1)
@@ -508,10 +509,17 @@ enum bcm63xx_irq {
#define BCM_6348_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
#define BCM_6348_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
#define BCM_6348_DSL_IRQ (IRQ_INTERNAL_BASE + 4)
+#define BCM_6348_UDC0_IRQ (IRQ_INTERNAL_BASE + 6)
#define BCM_6348_ENET1_IRQ (IRQ_INTERNAL_BASE + 7)
#define BCM_6348_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
#define BCM_6348_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9)
#define BCM_6348_OHCI0_IRQ (IRQ_INTERNAL_BASE + 12)
+#define BCM_6348_USB_CNTL_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 14)
+#define BCM_6348_USB_CNTL_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 15)
+#define BCM_6348_USB_BULK_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 16)
+#define BCM_6348_USB_BULK_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 17)
+#define BCM_6348_USB_ISO_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 18)
+#define BCM_6348_USB_ISO_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 19)
#define BCM_6348_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 20)
#define BCM_6348_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 21)
#define BCM_6348_ENET1_RXDMA_IRQ (IRQ_INTERNAL_BASE + 22)
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_udc.h
@@ -0,0 +1,6 @@
+#ifndef BCM63XX_DEV_USB_UDC_H_
+#define BCM63XX_DEV_USB_UDC_H_
+
+int bcm63xx_udc_register(void);
+
+#endif /* BCM63XX_DEV_USB_UDC_H_ */
--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
@@ -47,6 +47,7 @@ struct board_info {
unsigned int has_dsp:1;
unsigned int has_uart0:1;
unsigned int has_uart1:1;
+ unsigned int has_udc0:1;
/* ethernet config */
struct bcm63xx_enet_platform_data enet0;
--- a/arch/mips/bcm63xx/Makefile
+++ b/arch/mips/bcm63xx/Makefile
@@ -1,6 +1,6 @@
obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o \
- dev-usb-ohci.o dev-usb-ehci.o
+ dev-usb-ohci.o dev-usb-ehci.o dev-usb-udc.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-y += boards/
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -141,6 +141,30 @@ static struct clk clk_usbh = {
};
/*
+ * USB slave clock
+ */
+static void usbs_set(struct clk *clk, int enable)
+{
+ u32 mask;
+
+ switch(bcm63xx_get_cpu_id()) {
+ case BCM6338_CPU_ID:
+ mask = CKCTL_6338_USBS_EN;
+ break;
+ case BCM6348_CPU_ID:
+ mask = CKCTL_6348_USBS_EN;
+ break;
+ default:
+ return;
+ }
+ bcm_hwclock_set(mask, enable);
+}
+
+static struct clk clk_usbs = {
+ .set = usbs_set,
+};
+
+/*
* SPI clock
*/
static void spi_set(struct clk *clk, int enable)
@@ -208,6 +232,8 @@ struct clk *clk_get(struct device *dev,
return &clk_ephy;
if (!strcmp(id, "usbh"))
return &clk_usbh;
+ if (!strcmp(id, "usbs"))
+ return &clk_usbs;
if (!strcmp(id, "spi"))
return &clk_spi;
if (!strcmp(id, "periph"))
--- a/arch/mips/bcm63xx/Kconfig
+++ b/arch/mips/bcm63xx/Kconfig
@@ -7,6 +7,7 @@ config BCM63XX_CPU_6338
select USB_ARCH_HAS_OHCI
select USB_OHCI_BIG_ENDIAN_DESC
select USB_OHCI_BIG_ENDIAN_MMIO
+ select USB_ARCH_HAS_UDC
config BCM63XX_CPU_6345
bool "support 6345 CPU"
@@ -19,6 +20,7 @@ config BCM63XX_CPU_6348
select USB_ARCH_HAS_OHCI
select USB_OHCI_BIG_ENDIAN_DESC
select USB_OHCI_BIG_ENDIAN_MMIO
+ select USB_ARCH_HAS_UDC
config BCM63XX_CPU_6358
bool "support 6358 CPU"
View Git Blame Copy Permalink