From 31558805ae2f52710d659e06ef7ea40375af6d5c Mon Sep 17 00:00:00 2001
From: Werner Almesberger <werner@almesberger.net>
Date: Sun, 18 Sep 2011 00:49:38 -0300
Subject: [PATCH] labsw/: made column cavities 0.2 mm wider on each side

---
 labsw/LOG       |  3 +-
 labsw/labsw.brd | 84 ++++++++++++++++++++++++-------------------------
 2 files changed, 43 insertions(+), 44 deletions(-)

diff --git a/labsw/LOG b/labsw/LOG
index 11a9cdf..5e65be5 100644
--- a/labsw/LOG
+++ b/labsw/LOG
@@ -226,10 +226,9 @@ To do: debounce buttons (in software) before accepting a state change.
   - added hardware revision ID pins
   - use SPACER-*-BARE for mounting holes without copper
   - updated 2512 footprints (forgot to refresh after editing stdpass.fpd)
+  - widened column cavities by 0.2 mm on each side
 
 Pending:
-- widen column cavities by 0.2 mm on each side
-- consider pulling in front edge a little in buttons area
 - change mill nominal diameter from 35 mil to 26-27 mil
 - move vias between OUT opto-couplers 0.2 mm to the center
 - add orientation markings on copper layer for MCU and DIP sockets
diff --git a/labsw/labsw.brd b/labsw/labsw.brd
index 879723c..e06b104 100644
--- a/labsw/labsw.brd
+++ b/labsw/labsw.brd
@@ -1,4 +1,4 @@
-PCBNEW-BOARD Version 1 date Mon Sep 12 20:14:11 2011
+PCBNEW-BOARD Version 1 date Fri Sep 16 14:23:38 2011
 
 # Created by Pcbnew(2010-12-27 BZR 2685)-unstable
 
@@ -20,7 +20,7 @@ $EndGENERAL
 $SHEETDESCR
 Sheet A4 11700 8267
 Title "Lab Switch"
-Date "12 sep 2011"
+Date "16 sep 2011"
 Rev "0"
 Comp "Werner Almesberger"
 Comment1 ""
@@ -2429,6 +2429,46 @@ Ne 12 "/Back/EXT_IN_4_P"
 Po 1180 0
 $EndPAD
 $EndMODULE  2512
+$DRAWSEGMENT
+Po 0 77165 35354 77165 25984 50
+De 28 0 900 0 0
+$EndDRAWSEGMENT
+$DRAWSEGMENT
+Po 0 77165 38661 77165 42126 50
+De 28 0 900 0 0
+$EndDRAWSEGMENT
+$DRAWSEGMENT
+Po 0 73071 35354 73071 38661 50
+De 28 0 900 0 0
+$EndDRAWSEGMENT
+$DRAWSEGMENT
+Po 0 77165 38661 73071 38661 50
+De 28 0 900 0 0
+$EndDRAWSEGMENT
+$DRAWSEGMENT
+Po 0 77165 35354 73071 35354 50
+De 28 0 900 0 0
+$EndDRAWSEGMENT
+$DRAWSEGMENT
+Po 0 37008 38661 37008 44094 50
+De 28 0 900 0 0
+$EndDRAWSEGMENT
+$DRAWSEGMENT
+Po 0 37008 35354 37008 25984 50
+De 28 0 900 0 0
+$EndDRAWSEGMENT
+$DRAWSEGMENT
+Po 0 41102 35354 41102 38661 50
+De 28 0 900 0 0
+$EndDRAWSEGMENT
+$DRAWSEGMENT
+Po 0 37008 38661 41102 38661 50
+De 28 0 900 0 0
+$EndDRAWSEGMENT
+$DRAWSEGMENT
+Po 0 37008 35354 41102 35354 50
+De 28 0 900 0 0
+$EndDRAWSEGMENT
 $TEXTPCB
 Te "qi-hw.com"
 Po 62756 27638 800 800 120 0
@@ -2468,46 +2508,6 @@ Po 0 64567 42126 62599 44094 50
 De 28 0 900 0 0
 $EndDRAWSEGMENT
 $DRAWSEGMENT
-Po 0 77165 25984 77165 35433 50
-De 28 0 900 0 0
-$EndDRAWSEGMENT
-$DRAWSEGMENT
-Po 0 77165 42126 77165 38583 50
-De 28 0 900 0 0
-$EndDRAWSEGMENT
-$DRAWSEGMENT
-Po 0 73071 38583 73071 35433 50
-De 28 0 900 0 0
-$EndDRAWSEGMENT
-$DRAWSEGMENT
-Po 0 77165 38583 73071 38583 50
-De 28 0 900 0 0
-$EndDRAWSEGMENT
-$DRAWSEGMENT
-Po 0 77165 35433 73071 35433 50
-De 28 0 900 0 0
-$EndDRAWSEGMENT
-$DRAWSEGMENT
-Po 0 37008 25984 37008 35433 50
-De 28 0 900 0 0
-$EndDRAWSEGMENT
-$DRAWSEGMENT
-Po 0 37008 44094 37008 38583 50
-De 28 0 900 0 0
-$EndDRAWSEGMENT
-$DRAWSEGMENT
-Po 0 41102 35433 41102 38583 50
-De 28 0 900 0 0
-$EndDRAWSEGMENT
-$DRAWSEGMENT
-Po 0 37008 35433 41102 35433 50
-De 28 0 900 0 0
-$EndDRAWSEGMENT
-$DRAWSEGMENT
-Po 0 37008 38583 41102 38583 50
-De 28 0 900 0 0
-$EndDRAWSEGMENT
-$DRAWSEGMENT
 Po 0 75591 24409 77165 25983 50
 De 28 0 900 0 0
 $EndDRAWSEGMENT