- tray.pl (zf): lower floor by another mm, leaving 3-4 mm of material
- tray.pl (vd): increase vial diameter by 0.1 mm to allow for vial
tolerance and material expansion. Also, working from the inside to the
outside (instead of plunging into uncut material first) decreased the
hole radius slightly.
- tray.pl (do_cols, do_circles): removed exclusion of the first column
radius after vial
tolerance,
- doit (GEN): corrected name of toolpath generator
- doit (rdata): fixed typo ("rdate" vs. "rdata")
- doit (Z): set Z depth here, to avoid manual depth adjustment
- doit: don't use cameo - we compensate for the tool size in tray.pl
- doit: increased feed rate from 2 mm/s to 4 mm/s
- doit: clearance is above top layer, so 5 mm are more than enough
- tray.pl (zf): increase floor depth from very conservative 15 mm to
17 mm
- tray.pl (zs): increase depth step from 2 mm to 2.5 mm to accelerate
milling
- tray.pl (mw): increase wall thickness from 2 mm to 2.5 mm in order to
enlarge gap between sides (was smaller than tool diameter)
- tray.pl (r1): stop 2 steps before the edge, since we have the outline
as another radius-like step
- tray.pl (do_col): account for tool radius
- tray.pl (do_circles): lift the tool after each disc, not only after
each column
- tray.pl (do_cols, do_circles): temporarily skip 1st column
- tray.pl (main): do circles before the outline, to reduce chatter when
cutting the outline
- tray.pl (main): since we're no longer using "cameo" here, don't print
directives for it
This doesn't work yet. In particular, going through "cameo" doesn't seem
the most convenient choice, since "cameo" requires paths to be closed,
which is something the paths we use here aren't. (Conceptually, thet are
closed, but the implementation skips some small segments.)
This commit is just a snapshot before I experiment with changing the
algorithm.
- prereq.c (resolve): do not consider installing virtual packages
(forgotten in previous commit)
- prereq.c (resolve): renamed "next_dep" to "next_deps" to emphasize that
this is a list
- prereq.c (resolve): use "break" instead of "return" to abandon a
non-optimal path, so that we'll run future cleanup code
- prereq.c (resolve): fixed typos in explanation of QPKG_ADDING cleanup
- prereq.c (resolve): reference test/bug-adding in explanation
- pkg.h (enum flags): new flags QPKG_PROVIDED to indicate that the
package is only a provision, not an installable package
- fixup.h, fixup.c (complete_provisions): search for provisions that do
not have a real package associated with them, create a package for
them, and mark it as QPKG_PROVIDED
- qpkg.c (do_fixups): invoke complete_provisions
- pkg.h (struct pkg): add list of (virtual or real) packages a given
package provides
- pkg.c (new_pkg): initialize pkg->provides
- pkg.c (free_pkg): deallocate pkg->provides
- gobble.c (gobble_buf): parse the list of packages a package provides
- TODO: updated status of Provides support
- Makefile (OBJS_qpkg): added pkg.o
- gobble.c (gobble_buf): moved "struct pkg" allocation to function new_pkg
in pkg.c
- qpkg.h: moved "struct pkg" and subordinate structures to pkg.h
- pkg.h, pkg.c (new_pkg, free_pkg): provide package structure definition,
allocation, and deallocation
- fixup.c, gobble.c, prereq.c, qpkg.c: include "pkg.h"
- gobble.c (finish_pkg): use free_pkg instead of just "free" to avoid
leaking memory
- prereq.c (conflicts, resolve, prereq): renamed "conflicts" to
"old_conflicts"
- prereq.c (new_conflicts, resolve, prereq): also test whether any of the
conflicts of the package we're about to add matches an installed or
considered package
- test/conflict, test/instconf: test for conflicts introduced by package
about to be added
- prereq.c (installed_conflicts, free_conflicts, prereq): collect list of
pre-existing conflicts in installed packages
- prereq.c (prereq): check if package being requested already conflicts
- test/instconf: regression test for conflicts with installed packages
- TODO: updated for full support of conflicts. Mention that we're not
terribly efficient with handling conflicts.
- prereq.c (conflicts): detect conflicts
- prereq.c (prereq): pass list of conflicts of initial package
- test/conflict: regression test for basic conflict handling
- TODO: updated for partial implementation of conflicts
- Makefile (OBJS_qpkg): added fixup.o
- fixup.h, fixup.c (sort_versions): sort package versions
- qpkg.c (do_fixups, main): do fixups when done gobbling
- qpkg.h: need to include id.h to be self-contained
- test/sortver: test version sorting
- qpkg.c (list_all_packages): jrb indicates end-of-tree with pointer to
jrb_nil(), not NULL
- qpkg.c (list_all_packages, list_one_package): use ID2PF
- qpkg.c (list_all_packages): iterate over versions
