1
0
mirror of git://projects.qi-hardware.com/wernermisc.git synced 2024-12-27 20:55:32 +02:00
Commit Graph

2 Commits

Author SHA1 Message Date
Werner Almesberger
649e00b28e vialtray: ready for first test run (on-going)
- doit (GEN): corrected name of toolpath generator
- doit (rdata): fixed typo ("rdate" vs. "rdata")
- doit (Z): set Z depth here, to avoid manual depth adjustment
- doit: don't use cameo - we compensate for the tool size in tray.pl
- doit: increased feed rate from 2 mm/s to 4 mm/s
- doit: clearance is above top layer, so 5 mm are more than enough
- tray.pl (zf): increase floor depth from very conservative 15 mm to
  17 mm
- tray.pl (zs): increase depth step from 2 mm to 2.5 mm to accelerate
  milling
- tray.pl (mw): increase wall thickness from 2 mm to 2.5 mm in order to
  enlarge gap between sides (was smaller than tool diameter)
- tray.pl (r1): stop 2 steps before the edge, since we have the outline
  as another radius-like step
- tray.pl (do_col): account for tool radius
- tray.pl (do_circles): lift the tool after each disc, not only after
  each column
- tray.pl (do_cols, do_circles): temporarily skip 1st column
- tray.pl (main): do circles before the outline, to reduce chatter when
  cutting the outline
- tray.pl (main): since we're no longer using "cameo" here, don't print
  directives for it
2010-11-27 22:41:45 -03:00
Werner Almesberger
1d72af733e vialtray: make a tray for vials containing 0402/0603 components (in progress)
This doesn't work yet. In particular, going through "cameo" doesn't seem
the most convenient choice, since "cameo" requires paths to be closed,
which is something the paths we use here aren't. (Conceptually, thet are
closed, but the implementation skips some small segments.)

This commit is just a snapshot before I experiment with changing the
algorithm.
2010-11-27 20:17:25 -03:00