Werner Almesberger a9a0011fdd labsw/modules/spacer.fpd: changed pad to "bare" (no solder paste); added measurements		2012-05-21 01:01:59 -03:00
..
Makefile	labsw/: added partially populated DIP6 sockets since DIP4 is hard to source	2011-09-30 04:03:08 -03:00
dip.fpd	labsw/: changed hole in DIP from 0.5 mm to 0.8 mm, ratio from 2.5 to 2	2011-09-03 02:56:16 -03:00
dip4of6.fpd	labsw/: added partially populated DIP6 sockets since DIP4 is hard to source	2011-09-30 04:03:08 -03:00
header.fpd	labsw/: redesigned rear connections to pair in/out by "near" potential	2011-09-27 11:55:57 -03:00
relay.fpd	labsw/: changed all ring-to-hole ratios to 2.5; placed spacers at 1 mm from edge	2011-08-27 17:54:30 -03:00
spacer.fpd	labsw/modules/spacer.fpd: changed pad to "bare" (no solder paste); added measurements	2012-05-21 01:01:59 -03:00