Werner Almesberger 05c52e7390 labsw/LOG: reworked power supply bypassing

2011-09-07 04:50:44 -03:00

..

components

labsw/: grouped opto-couplers for socketing; improved clearance of inputs

2011-08-28 10:46:02 -03:00

draft

labsw/: moved base and front Xfig drawings to draft/

2011-09-01 10:16:48 -03:00

fw

labsw/fw/: added EP0 commands; main loop now toggles

2011-09-06 04:10:37 -03:00

mech

labsw/mech/front.fpd: reduced width from 104 to 103.6 mm, LED hole from 6.9 to 6.2 mm

2011-09-05 14:09:13 -03:00

modules

labsw/: changed hole in DIP from 0.5 mm to 0.8 mm, ratio from 2.5 to 2

2011-09-03 02:56:16 -03:00

pcb

labsw/pcb/Makefile: increased clearance from 2 mm to 3 mm

2011-09-01 12:04:02 -03:00

tool

labsw/tool/: basic labsw control utility

2011-09-06 04:21:36 -03:00

back.sch

labsw/: changed resistors for opto-coupler LEDs from 180 to 150 Ohm

2011-09-03 03:35:15 -03:00

BOOKSHELF

labsw/BOOKSHELF: added the BAS16WT flyback diode

2011-09-05 15:34:16 -03:00

front.sch

labsw/: changed resistors for opto-coupler LEDs from 180 to 150 Ohm

2011-09-03 03:35:15 -03:00

labsw.brd

labsw/: changed hole in DIP from 0.5 mm to 0.8 mm, ratio from 2.5 to 2

2011-09-03 02:56:16 -03:00

labsw.cmp

labsw/: grouped opto-couplers for socketing; improved clearance of inputs

2011-08-28 10:46:02 -03:00

labsw.pro

labsw/: reduced depth of "bays" for columns from 11 mm to 10.4 mm

2011-09-01 04:42:41 -03:00

labsw.sch

labsw/labsw.sch: label "IN_1" was in italics - changed to normal

2011-09-03 12:34:38 -03:00

LOG

labsw/LOG: reworked power supply bypassing

2011-09-07 04:50:44 -03:00

Makefile

labsw/: BOOKSHELF and mechanical drawings

2011-08-23 11:51:39 -03:00