Werner Almesberger 1d4b89ec4f labsw/mech/font.fpd: increased banana jack hole from 6 mm to 8 mm

2011-09-04 22:01:50 -03:00

..

components

labsw/: grouped opto-couplers for socketing; improved clearance of inputs

2011-08-28 10:46:02 -03:00

draft

labsw/: moved base and front Xfig drawings to draft/

2011-09-01 10:16:48 -03:00

fw

labsw/fw/Makefile: remove io-parts.h on clean; improved dependencies of io-parts.h

2011-09-04 12:35:59 -03:00

mech

labsw/mech/font.fpd: increased banana jack hole from 6 mm to 8 mm

2011-09-04 22:01:50 -03:00

modules

labsw/: changed hole in DIP from 0.5 mm to 0.8 mm, ratio from 2.5 to 2

2011-09-03 02:56:16 -03:00

pcb

labsw/pcb/Makefile: increased clearance from 2 mm to 3 mm

2011-09-01 12:04:02 -03:00

back.sch

labsw/: changed resistors for opto-coupler LEDs from 180 to 150 Ohm

2011-09-03 03:35:15 -03:00

BOOKSHELF

labsw/: BOOKSHELF and mechanical drawings

2011-08-23 11:51:39 -03:00

front.sch

labsw/: changed resistors for opto-coupler LEDs from 180 to 150 Ohm

2011-09-03 03:35:15 -03:00

labsw.brd

labsw/: changed hole in DIP from 0.5 mm to 0.8 mm, ratio from 2.5 to 2

2011-09-03 02:56:16 -03:00

labsw.cmp

labsw/: grouped opto-couplers for socketing; improved clearance of inputs

2011-08-28 10:46:02 -03:00

labsw.pro

labsw/: reduced depth of "bays" for columns from 11 mm to 10.4 mm

2011-09-01 04:42:41 -03:00

labsw.sch

labsw/labsw.sch: label "IN_1" was in italics - changed to normal

2011-09-03 12:34:38 -03:00

LOG

labsw/LOG: log of development

2011-09-03 12:45:16 -03:00

Makefile

labsw/: BOOKSHELF and mechanical drawings

2011-08-23 11:51:39 -03:00