mirror of
git://projects.qi-hardware.com/wernermisc.git
synced 2024-12-18 20:33:09 +02:00
37df000637
I.e., it's not necessary that FN be up or even rendering. Note that all is was still without NOR locking. |
||
|---|---|---|
| .. | ||
| LOG | ||
| loop | ||
| loop2 | ||
| README | ||
power-cycling torture test, to see if booting into FN and then power-cycling causes NOR corruption. You need: - an M1 with JTAG board - a Lab Switch (../../labsw) to control power to the M1 - a USB connection to the Lab Switch - the Lab Switch control tool "labsw" installed - a USB connection to the JTAG board - UrJTAG installed, see http://milkymist.org/wiki/index.php?title=Flashing_the_Milkymist_One#compile_urjtag - neocon from http://svn.openmoko.org/developers/werner/neocon/ (or any other program to monitor and log an outbound serial line) Run neocon -a -l log -T /dev/ttyUSB0 Then ./loop This will: - power-cycle the M1, leaving it powered off for 5 seconds - give it two seconds to power on - boot the "regular" bitstream, i.e., Flickernoise - wait 70 seconds for Flickernoise to start and to render the "The Tunnel" for a few seconds - repeat this forever The log file records the console output from the M1, plus time stamps and cycle numbers written from the "loop" script.