1
0
mirror of git://projects.qi-hardware.com/wernermisc.git synced 2024-12-24 19:59:52 +02:00
wernermisc/m1/BUILD-CHEAT-SHEET
Werner Almesberger 31ba2e40e1 m1/BUILD-CHEAT-SHEET: removed RTEMS/YAFFS pinning; added known to be good versions
... just in case we need them for future pinning.
2012-04-18 20:12:30 -03:00

115 lines
2.5 KiB
Plaintext

(This is my cheat sheet. It works for me but yet may stil be incomplete
and redundant at the same time.)
These instructions should be valid for the following versions:
rtems 5c51ba1333d96e2ada2c374ba22b551d179e6685
rtems-yaffs cbe7492ee0e5a9bced8267d9c7ab2fd997299fda
milkymist de65a675a8425b6f11361fdcaa3a9f5580ef49ab
flickernoise c1a99feeed387466cbb1cd5c9f734763d25aa450
Instructions:
http://milkymist.org/wiki/index.php?title=RTEMS_build_instructions
Getting rtems:
git clone git://git.rtems.org/rtems.git
cd rtems
ln -s /home/qi/wernermisc/m1/patches/rtems/ patches
quilt push -a
Getting rtems-yaffs:
git clone git://github.com/milkymist/rtems-yaffs2.git
cd rtems-yaffs2
Compiling rtems:
cd rtems
./bootstrap -c && ./bootstrap -p && ./bootstrap # 08:37
mkdir -p build
cd build
../configure --target=lm32-rtems4.11 --enable-rtemsbsp=milkymist \
--enable-posix --disable-itron --enable-networking \
--disable-multiprocessing --disable-tests --prefix=/opt/rtems-4.11 # 00:14
make # -j5 # 01:21
make install # 00:06
Compiling rtems-yaffs:
cd rtems-yaffs2
make -f Makefile.rtems
make -f Makefile.rtems install
Compiling milkymist.git, libfpvm:
cd software/libfpvm
make install
Compiling milkymist.git, softusb-input:
prerequisites:
make -C software/libhpdmc
make -C software/libnet
make -C software/libbase
make -C softusb-input
make -C software/libhal
make -C software/bios
./build_bios.sh
Compiling flickernoise.git:
cd flickernoise/src
make bin/flickernoise.fbi && m1nor bin/flickernoise.fbi
(m1nor from wernermisc/m1/tools/)
Rebooting the M1:
cd wernermisc/m1/jtag-boot
make boot
Send patches:
git send-email --cover-letter --thread --annotate f6c7474ae3b181157d8950e25c4705d53d9ae9c1
------------------------------
Draft items below:
---
Rebuild Flickernoise after updating the Navre firmware:
milkymist.git:
make -C softusb-input
make -C softusb-input install
flickernoise.git:
cd src
make clean && make -j 5 bin/flickernoise.fbi && m1nor bin/flickernoise.fbi
---
Synthesize the SoC:
cd boards/milkymist-one/flash
make -C ../synthesis -f Makefile.xst clean && make clean && time make soc.fpg
m1nor soc.fpg
# synthesis: boards/milkymist-one/synthesis/build/system.srp
# timing: boards/milkymist-one/synthesis/build/system-routed.par
---
debug:
flterm --gdb-passthrough --port /dev/ttyUSB0 --kernel /dev/null
/home/qi/m1/gdb-7.3.1/gdb/gdb /home/qi/m1/flickernoise/src/bin/flickernoise
set remote interrupt-on-connect on
target remote /dev/pts/155