| .. |
|
components
|
labsw/: grouped opto-couplers for socketing; improved clearance of inputs
|
2011-08-28 10:46:02 -03:00 |
|
draft
|
labsw/: moved base and front Xfig drawings to draft/
|
2011-09-01 10:16:48 -03:00 |
|
fw
|
labsw/fw/: added EP0 commands; main loop now toggles
|
2011-09-06 04:10:37 -03:00 |
|
mech
|
labsw/mech/front.fpd: reduced width from 104 to 103.6 mm, LED hole from 6.9 to 6.2 mm
|
2011-09-05 14:09:13 -03:00 |
|
modules
|
labsw/: changed hole in DIP from 0.5 mm to 0.8 mm, ratio from 2.5 to 2
|
2011-09-03 02:56:16 -03:00 |
|
pcb
|
labsw/pcb/Makefile: increased clearance from 2 mm to 3 mm
|
2011-09-01 12:04:02 -03:00 |
|
tool
|
labsw/tool/: basic labsw control utility
|
2011-09-06 04:21:36 -03:00 |
|
back.sch
|
labsw/: changed resistors for opto-coupler LEDs from 180 to 150 Ohm
|
2011-09-03 03:35:15 -03:00 |
|
BOOKSHELF
|
labsw/BOOKSHELF: added the BAS16WT flyback diode
|
2011-09-05 15:34:16 -03:00 |
|
front.sch
|
labsw/: changed resistors for opto-coupler LEDs from 180 to 150 Ohm
|
2011-09-03 03:35:15 -03:00 |
|
labsw.brd
|
labsw/: changed hole in DIP from 0.5 mm to 0.8 mm, ratio from 2.5 to 2
|
2011-09-03 02:56:16 -03:00 |
|
labsw.cmp
|
labsw/: grouped opto-couplers for socketing; improved clearance of inputs
|
2011-08-28 10:46:02 -03:00 |
|
labsw.pro
|
labsw/: reduced depth of "bays" for columns from 11 mm to 10.4 mm
|
2011-09-01 04:42:41 -03:00 |
|
labsw.sch
|
labsw/labsw.sch: label "IN_1" was in italics - changed to normal
|
2011-09-03 12:34:38 -03:00 |
|
LOG
|
labsw/LOG: added more details on occasional labsw malfunction
|
2011-09-07 04:24:05 -03:00 |
|
Makefile
|
labsw/: BOOKSHELF and mechanical drawings
|
2011-08-23 11:51:39 -03:00 |
