Werner Almesberger fd6b95dbb6 labsw/mech/Makefile: increased engraving depth from 0.2 mm to 0.5 mm		2011-09-04 22:00:48 -03:00
..
components	labsw/: grouped opto-couplers for socketing; improved clearance of inputs	2011-08-28 10:46:02 -03:00
draft	labsw/: moved base and front Xfig drawings to draft/	2011-09-01 10:16:48 -03:00
fw	labsw/fw/Makefile: remove io-parts.h on clean; improved dependencies of io-parts.h	2011-09-04 12:35:59 -03:00
mech	labsw/mech/Makefile: increased engraving depth from 0.2 mm to 0.5 mm	2011-09-04 22:00:48 -03:00
modules	labsw/: changed hole in DIP from 0.5 mm to 0.8 mm, ratio from 2.5 to 2	2011-09-03 02:56:16 -03:00
pcb	labsw/pcb/Makefile: increased clearance from 2 mm to 3 mm	2011-09-01 12:04:02 -03:00
back.sch	labsw/: changed resistors for opto-coupler LEDs from 180 to 150 Ohm	2011-09-03 03:35:15 -03:00
BOOKSHELF	labsw/: BOOKSHELF and mechanical drawings	2011-08-23 11:51:39 -03:00
front.sch	labsw/: changed resistors for opto-coupler LEDs from 180 to 150 Ohm	2011-09-03 03:35:15 -03:00
labsw.brd	labsw/: changed hole in DIP from 0.5 mm to 0.8 mm, ratio from 2.5 to 2	2011-09-03 02:56:16 -03:00
labsw.cmp	labsw/: grouped opto-couplers for socketing; improved clearance of inputs	2011-08-28 10:46:02 -03:00
labsw.pro	labsw/: reduced depth of "bays" for columns from 11 mm to 10.4 mm	2011-09-01 04:42:41 -03:00
labsw.sch	labsw/labsw.sch: label "IN_1" was in italics - changed to normal	2011-09-03 12:34:38 -03:00
LOG	labsw/LOG: log of development	2011-09-03 12:45:16 -03:00
Makefile	labsw/: BOOKSHELF and mechanical drawings	2011-08-23 11:51:39 -03:00