xburst-tools/usbboot/README.usbboot

*
* usbboot
*
* Utility to respond to the Ingenic XBurst USB boot protocol, provide
* initial boot stages and ability to access NAND on device.
*

Authors: Ingenic Semiconductor, Inc.
         Xiangfu Liu <xiangfu@sharism.cc>
         Marek Lindner <lindner_marek@yahoo.de>
         Wolfgang Spraul <wolfgang@sharism.cc>

This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version
3 of the License, or (at your option) any later version.

usbboot is the Linux version and rewrite of a Windows utility from Ingenic also called usbboot.
Homepage: http://www.ingenic.cn/eng/productServ/kfyd/compiler/pffaqContents.aspx#questionAnchor8
Windows Binary: ftp://ftp.ingenic.cn/3sw/00tools/usb_boot/tools/usbboot1.4b-tools.zip
Windows Sources: ftp://ftp.ingenic.cn/3sw/00tools/usb_boot/tools/usbboot1.4b-sources.zip
Manual: ftp://ftp.ingenic.cn/3sw/00tools/usb_boot/manual/USB_Boot_Tool_Manual_1.4_EN.pdf

Build Requirements: libusb-dev, libconfuse-dev

Build and Installation:
  cd ../
  ./autogen.sh
  ./configure --enable-firmware --prefix=/usr
  make
  make install
    *) make install will install the 'usbboot' binary to /usr/bin/usbboot,
       the stage 1 and 2 bootloaders to /usr/share/xburst-tools/,
       usbboot.cfg configuration file into /etc/xburst-tools.

Examples:
  sudo usbboot (invoking usbboot without options will let you enter commands at the usbboot prompt)
  sudo usbboot  -c "boot"
  sudo usbboot  -c "nprog 0 u-boot-nand.bin 0 0 -n"