qi-hardware/xburst-tools
1
0
Fork 0
mirror of git://projects.qi-hardware.com/xburst-tools.git synced 2024-11-01 12:09:40 +02:00
Code

[usbboot] delete useless config file

Browse Source
This commit is contained in:
Xiangfu Liu 2010-02-25 11:08:27 +08:00
parent 53842b350c
commit 46d22cd94c
1 changed files with 0 additions and 59 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

59
usbboot/doc/usbboot_1GB_nand.cfg
View File

@ -1,59 +0,0 @@
#
# usbboot configuration file
#
# Utility to respond to the Ingenic XBurst USB boot protocol, provide
# initial boot stages and ability to access NAND on device.
#
# Authors: Ingenic Semiconductor, Inc.
# Xiangfu Liu <xiangfu@qi-hardware.com>
# Marek Lindner <lindner_marek@yahoo.de>
# Wolfgang Spraul <wolfgang@qi-hardware.com>
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# [PLL]
EXTCLK = 12 #Define the external crystal in MHz
CPUSPEED = 252 #Define the PLL output frequency
PHMDIV = 3 #Define the frequency divider ratio of PLL=CCLK:PCLK=HCLK=MCLK
BOUDRATE = 57600 #Define the uart boudrate
USEUART = 0 #Use which uart, 0/1 for jz4740,0/1/2/3 for jz4750
# [SDRAM]
BUSWIDTH = 16 #The bus width of the SDRAM in bits (16|32)
BANKS = 4 #The bank number (2|4)
ROWADDR = 13 #Row address width in bits (11-13)
COLADDR = 9 #Column address width in bits (8-12)
ISMOBILE = 0 #Define whether SDRAM is mobile SDRAM, this only valid for Jz4750 ,1:yes 0:no
ISBUSSHARE = 1 #Define whether SDRAM bus share with NAND 1:shared 0:unshared
DEBUGOPS = 0
# [NAND]
NAND_BUSWIDTH = 8 #The width of the NAND flash chip in bits (8|16|32)
NAND_ROWCYCLES = 3 #The row address cycles (2|3)
NAND_PAGESIZE = 2048 #The page size of the NAND chip in bytes(512|2048|4096)
NAND_PAGEPERBLOCK = 128 #The page number per block
NAND_FORCEERASE = 1 #The force to erase flag (0|1)
NAND_OOBSIZE = 64 #oob size in byte
NAND_ECCPOS = 6 #Specify the ECC offset inside the oob data (0-[oobsize-1])
NAND_BADBLOCKPOS = 0 #Specify the badblock flag offset inside the oob (0-[oobsize-1])
NAND_BADBLOCKPAGE = 127 #Specify the page number of badblock flag inside a block(0-[PAGEPERBLOCK-1])
NAND_PLANENUM = 1 #The planes number of target nand flash
NAND_BCHBIT = 4 #Specify the hardware BCH algorithm for 4750 (4|8)
NAND_WPPIN = 0 #Specify the write protect pin number
NAND_BLOCKPERCHIP = 0 #Specify the block number per chip,0 means ignore
#The program will calculate the total SDRAM size by : size = 2^(ROWADDR + COLADDR) * BANKNUM * (SDRAMWIDTH / 4)
#The CPUSPEED has restriction as: ( CPUSPEED % EXTCLK == 0 ) && ( CPUSPEED % 12 == 0 )
#For jz4750, the program just init BANK0(DSC0).
#Beware all variables must be set correct!