diff --git a/qiboot/include/neo_gta02.h b/qiboot/include/neo_gta02.h index dc130f8..8f632c9 100644 --- a/qiboot/include/neo_gta02.h +++ b/qiboot/include/neo_gta02.h @@ -26,29 +26,9 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define TEXT_BASE 0x00000000 /* xiangfu add*/ - -/* we want to be able to start u-boot directly from within NAND flash */ -#define CONFIG_LL_INIT_NAND_ONLY -#define CONFIG_S3C2410_NAND_BOOT 1 -#define CONFIG_S3C2410_NAND_SKIP_BAD 1 - -#define CFG_UBOOT_SIZE 0x40000 /* size of u-boot, for NAND loading */ - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_SMDK2440 1 /* on a SAMSUNG SMDK2410 Board */ - -/* input clock of PLL */ -#define CONFIG_SYS_CLK_FREQ 12000000/* the GTA02 has this input clock */ - - -#define USE_920T_MMU 1 -#define CONFIG_USE_IRQ 1 +#define TEXT_BASE 0x00000000 /* xiangfu add*/ +#define CFG_ENV_SIZE 0x40000 /* 128k Total Size of Environment Sector */ /* * Size of malloc() pool */ @@ -56,251 +36,4 @@ /* >> CFG_VIDEO_LOGO_MAX_SIZE */ #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -/* - * Hardware drivers - */ - -/* - * select serial console configuration - */ -#define CONFIG_SERIAL3 1 /* we use SERIAL 1 on GTA01 */ -#define CONFIG_SERIAL_MULTI - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - -/*********************************************************** - * Command definition - ***********************************************************/ -#define CONFIG_CMD_BDI -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_IMI -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_ENV - /* CFG_CMD_IRQ | */ \ -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CONSOLE - /* CFG_CMD_BMP | */ \ -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_RUN -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_I2C -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_DATE -#define CONFIG_CMD_AUTOSCRIPT -#define CONFIG_CMD_BSP -#define CONFIG_CMD_ELF -#define CONFIG_CMD_MISC - /* CFG_CMD_USB | */ \ -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_DIAG - /* CFG_CMD_HWFLOW | */ \ -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_NAND -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_PORTIO -#define CONFIG_CMD_MMC -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_LICENSE -#define CONFIG_CMD_TERMINAL - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "" -#define CONFIG_BOOTCOMMAND "setenv bootargs ${bootargs_base} ${mtdparts}; nand read.e 0x32000000 kernel; bootm 0x32000000" - -#define CONFIG_DOS_PARTITION 1 - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -/* what's this ? it's not used anywhere */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CFG_LONGHELP /* undef to save memory */ - -#define STRINGIFY(s) DO_STRINGIFY(s) /* expand the argument */ -#define DO_STRINGIFY(s) #s /* quote it */ -#define CFG_PROMPT __cfg_prompt - /* Monitor Command Prompt */ -#ifndef __ASSEMBLY__ -/*extern char __cfg_prompt[20];*/ -#endif - -#if defined(CONFIG_ARCH_GTA02_v1) -#define CONFIG_S3C2440 1 /* SAMSUNG S3C2440 SoC */ -#else -#define CONFIG_S3C2442 1 /* SAMSUNG S3C2442 SoC */ -#endif - -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 64 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ - -#define CFG_MEMTEST_START 0x30000000 /* memtest works on */ -#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ - -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ - -#define CFG_LOAD_ADDR 0x33000000 /* default load address */ - -/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ -/* it to wrap 100 times (total 1562500) to get 1 sec. */ -#define CFG_HZ 1562500 - -/* valid baudrates */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -#define CFG_BOOTMENU - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (8*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -#if 0 -#define CONFIG_USB_OHCI_NEW 1 -#define CFG_USB_OHCI_CPU_INIT 1 -#define CFG_USB_OHCI_REGS_BASE 0x49000000 /* S3C24X0_USB_HOST_BASE */ -#define CFG_USB_OHCI_SLOT_NAME "s3c2440" -#define CFG_USB_OHCI_MAX_ROOT_PORTS 2 -#endif - -#define CONFIG_USB_DEVICE 1 -#define CONFIG_USB_TTY 1 -#define CFG_CONSOLE_IS_IN_ENV 1 -#define CONFIG_USBD_VENDORID 0x1d50 /* OpenMoko, Inc. */ -#define CONFIG_USBD_PRODUCTID_GSERIAL 0x5120 /* gserial */ -#define CONFIG_USBD_PRODUCTID_CDCACM 0x5119 /* CDC ACM */ -#define CONFIG_USBD_MANUFACTURER "OpenMoko, Inc" -#define CONFIG_USBD_PRODUCT_NAME "Neo1973 Bootloader " U_BOOT_VERSION -#define CONFIG_USBD_DFU 1 -#define CONFIG_USBD_DFU_XFER_SIZE 4096 /* 0x4000 */ -#define CONFIG_USBD_DFU_INTERFACE 2 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "usbtty=cdc_acm\0" \ - "stderr=usbtty\0stdout=usbtty\0stdin=usbtty\0" \ - "bootargs_base=rootfstype=jffs2 root=/dev/mtdblock6 console=ttySAC2,115200 console=tty0 loglevel=8\0" \ - "" -#define CONFIG_CMD_LOADENV -#define CONFIG_CMD_DEFAULTENV - - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ -#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */ - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -#define CFG_ENV_IS_IN_NAND 1 -#define CFG_ENV_SIZE 0x40000 /* 128k Total Size of Environment Sector */ -#define CFG_ENV_OFFSET_OOB 1 /* Location of ENV stored in block 0 OOB */ -#define CFG_PREBOOT_OVERRIDE 1 /* allow preboot from memory */ -#define CFG_ENV_OVERRIDE /* allow pre-loading the environment */ - -#define NAND_MAX_CHIPS 1 -#define CFG_NAND_BASE 0x4e000000 -#define CFG_MAX_NAND_DEVICE 1 - -#define CONFIG_MMC 1 -#define CONFIG_MMC_WIDE 1 -#define CONFIG_MMC_GLAMO 1 -#define CFG_MMC_BASE 0xff000000 -#define CONFIG_DEPOWER_MMC_ON_BOOT 1 - -/* EXT2 driver */ -#define CONFIG_EXT2 1 - -#define CONFIG_FAT 1 -#define CONFIG_SUPPORT_VFAT - -#if 1 -/* JFFS2 driver */ -#define CONFIG_JFFS2_CMDLINE 1 -#define CONFIG_JFFS2_NAND 1 -#define CONFIG_JFFS2_NAND_DEV 0 -//#define CONFIG_JFFS2_NAND_OFF 0x634000 -//#define CONFIG_JFFS2_NAND_SIZE 0x39cc000 -#endif - -/* ATAG configuration */ -#define CONFIG_INITRD_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_CMDLINE_TAG 1 -#define CONFIG_REVISION_TAG 1 -#if 0 -#define CONFIG_SERIAL_TAG 1 -#endif - -#define CONFIG_DRIVER_S3C24X0_I2C 1 -#define CONFIG_HARD_I2C 1 -#define CFG_I2C_SPEED 400000 /* 400kHz according to PCF50633 data sheet */ -#define CFG_I2C_SLAVE 0x7f - -/* we have a board_late_init() function */ -#define BOARD_LATE_INIT 1 - -#if 1 -#define CONFIG_VIDEO -#define CONFIG_VIDEO_GLAMO3362 -#define CONFIG_CFB_CONSOLE -//#define CONFIG_VIDEO_LOGO -//#define CONFIG_SPLASH_SCREEN -#define CFG_VIDEO_LOGO_MAX_SIZE (640*480+1024+100) /* 100 = slack */ -#define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_VGA_AS_SINGLE_DEVICE -#define CONFIG_CMD_UNZIP - -#define VIDEO_FB_16BPP_PIXEL_SWAP - -#define VIDEO_KBD_INIT_FCT 0 -#define VIDEO_TSTC_FCT serial_tstc -#define VIDEO_GETC_FCT serial_getc - -#define CONFIG_GLAMO_BASE 0x08000000 -#endif - -#define CONFIG_S3C2410_NAND_BBT 1 -//#define CONFIG_S3C2410_NAND_HWECC 1 - -#define CONFIG_DRIVER_PCF50633 1 -#define CONFIG_RTC_PCF50633 1 - -#define MTDIDS_DEFAULT "nor0=physmap-flash,nand0=neo1973-nand" -//#define MTPARTS_DEFAULT "neo1973-nand:256k(u-boot),128k(u-boot_env),8M(kernel),640k(splash),256k(factory),-(rootfs)" -#define CFG_MTDPARTS_PREFIX "physmap-flash:-(nor);" -#define CFG_NAND_DYNPART_MTD_KERNEL_NAME "neo1973-nand" -#define CONFIG_NAND_DYNPART - -#define CFG_MAX_FLASH_BANKS 1 -#define CFG_MAX_FLASH_SECT 1 - -#define DFU_NUM_ALTERNATES 7 - -#ifndef __ASSEMBLY__ -/*extern int gta02_revision;*/ /* use this instead of CONFIG_GTA02_REVISION */ -#endif - #endif /* __CONFIG_H */