diff --git a/inflash/README b/inflash/README
index d058a99..ca5b04b 100644
--- a/inflash/README
+++ b/inflash/README
@@ -16,9 +16,18 @@ as published by the Free Software Foundation; either version
 
 Build Requirements: libusb-dev, libconfuse-dev
 
-To run inflash you need device stage 1 (fw.bin), stage 2 (usb_boot.bin)
-and usb_boot.cfg for device configuration.
+Build and Installation:
+  ./autogen.sh
+  ./configure
+  make
+  make install
+    *) make install will install the 'inflash' binary to /usr/bin/inflash
+       and the stage 1 and 2 bootloaders as well as inflash.cfg configuration
+       file into /usr/share/inflash
 
-sudo ./inflash -c "boot"
-sudo ./inflash -c "nprog 0 u-boot-nand.bin 0 0 -n"
-sudo ./inflash -c "nprog 2048 uImage 0 0 -n"
+Configuration file: /usr/share/inflash/inflash.cfg
+
+Examples:
+  sudo inflash -c "boot"
+  sudo inflash -c "nprog 0 u-boot-nand.bin 0 0 -n"
+  sudo inflash -c "nprog 2048 uImage 0 0 -n"
diff --git a/inflash/src/Makefile.am b/inflash/src/Makefile.am
index e2752b2..e4d8bc1 100644
--- a/inflash/src/Makefile.am
+++ b/inflash/src/Makefile.am
@@ -13,7 +13,7 @@ prefix = /usr
 
 datadir = /usr/share/inflash
 data_DATA = ../xburst_stage1/xburst_stage1.bin ../xburst_stage2/xburst_stage2.bin \
-	usb_boot.cfg
+	inflash.cfg
 EXTRA_DIST = $(datadir)
 
 ../xburst_stage1/xburst_stage1.bin:
diff --git a/inflash/src/usb_boot.cfg b/inflash/src/inflash.cfg
similarity index 69%
rename from inflash/src/usb_boot.cfg
rename to inflash/src/inflash.cfg
index a669e7a..1d343ca 100644
--- a/inflash/src/usb_boot.cfg
+++ b/inflash/src/inflash.cfg
@@ -1,23 +1,17 @@
-/*
- * create nand flash image for pavo board
- *
- * Copyright (C) 2009 xiangfu <xiangfu@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 or
- * (at your option) version 3 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
+#
+# inflash configuration file
+#
+# Utility to respond to Ingenic XBurst USB boot protocol, provide
+# initial boot stages and ability to access NAND on device.
+#
+# Authors: Xiangfu Liu <xiangfu.z@gmail.com>
+#          Marek Lindner <lindner_marek@yahoo.de>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version
+# 3 of the License, or (at your option) any later version.
+#
 
 # [PLL]
 EXTCLK = 12	#Define the external crystal in MHz
diff --git a/inflash/src/ingenic_cfg.h b/inflash/src/ingenic_cfg.h
index 1a18f02..3ea5b01 100644
--- a/inflash/src/ingenic_cfg.h
+++ b/inflash/src/ingenic_cfg.h
@@ -12,7 +12,7 @@
 
 #include "usb_boot_defines.h"
 
-#define CONFIG_FILE_PATH "/usr/share/inflash/usb_boot.cfg"
+#define CONFIG_FILE_PATH "/usr/share/inflash/inflash.cfg"
 
 int hand_init_def(struct hand *hand);
 int check_dump_cfg(struct hand *hand);