xiangfu
46f40dbfa6
split main.c to cmd_boot.c and main.c
2009-04-28 15:57:53 +00:00
xiangfu
7a4d062a79
add clean backup file
2009-04-28 15:56:32 +00:00
xiangfu
8c3ab02952
correct the switch for version
2009-04-28 14:14:58 +00:00
xiangfu
e6bf557fee
add option
2009-04-28 14:09:07 +00:00
xiangfu
7e02a14ac0
delete u-boot folder
2009-04-27 17:08:44 +00:00
xiangfu
7925295fd6
delete ,inc.
2009-04-27 17:05:52 +00:00
xiangfu
d13f0af3b0
update Makefile
2009-04-27 17:03:46 +00:00
xiangfu
4e23a51d53
now inflash can upload stage2
2009-04-27 16:08:41 +00:00
xiangfu
1675108f82
init the cpu_id
2009-04-27 09:37:05 +00:00
xiangfu
60cb0eb193
add read configure file code
2009-04-27 08:54:10 +00:00
xiangfu
4f47892d13
add usb_boot.cfg file
2009-04-27 08:15:27 +00:00
xiangfu
738212eb35
change the stage1 start address
2009-04-27 06:42:15 +00:00
xiangfu
3bcfd5725b
upload use usb_bulk_wirte.
2009-04-26 20:08:14 +00:00
xiangfu
ca44786d0f
add usb request value
2009-04-26 18:17:38 +00:00
lindnermarek
c84cd36cf8
[inflash] send the data length before uploading the file
2009-04-26 18:11:19 +00:00
xiangfu
6850c99ab8
now we don't have USBBoot.cfg file.
...
for now. we put the configure in code.
2009-04-26 18:09:08 +00:00
xiangfu
22cb7cda9e
correct the flash tool path
2009-04-26 15:34:02 +00:00
lindnermarek
8979988877
[flash-tool] complete inflash stage1
...
The stage1 file can be uploaded but the following bootstrap is not successful. Once this bug is found adding stage2 is no problem.
2009-04-26 10:37:31 +00:00
xiangfu
08a770af52
test email
2009-04-24 03:18:27 +00:00
xiangfu
1bd0ec6eb3
don't need this we use flash-tool instead.
2009-04-23 05:51:18 +00:00
lindnermarek
a11533e6ca
add linux usb flash tool
2009-04-22 18:22:16 +00:00
xiangfu
f41288f47c
add RXD pin
2009-04-22 14:42:48 +00:00
xiangfu
3400d208d5
mv kernel code to github.com
2009-04-22 14:39:48 +00:00
xiangfu
e418b865c4
try to write the ingenic driver
2009-04-15 17:06:05 +00:00
xiangfu
4303c6e1f5
add u-boot git info
2009-04-15 16:56:12 +00:00
xiangfu
0cebd4b4c8
we have git repos keep u-boot
2009-04-15 16:51:56 +00:00
xiangfu
67126171bb
we don't find the RXD on the Pi's PCB. so I make the u-boot driectly
...
boot kernel
change some config base on GGV's nand boot
2009-04-14 03:58:36 +00:00
xiangfu
6b41c92f61
add README
2009-04-13 15:44:54 +00:00
xiangfu
52814d95f5
change CPU speed and command prompt
2009-04-13 15:30:36 +00:00
xiangfu
edeb87d8e4
Here comes the updated patch for the Ingenic SoCs. This patch removed all the
...
*.o.cmd files that were created by the patch, which could ossibly confuse
Kbuild with intermediate module sources.
This patch is intended to replace the one you have in the Google Code
by Florian Fainelli
Email : florian@openwrt.org
http://openwrt.org
2009-04-13 13:25:25 +00:00
xiangfu
a3b9071e22
change the usbboot to ingenic-tools (host side code)
...
add usb-boot to keep the device code.
2009-04-11 15:04:25 +00:00
xiangfu
fa30f9e437
don't display the help command, just output
2009-04-07 08:03:24 +00:00
xiangfu
16853c48af
add usbboot stage1 stage2 to Makefile
2009-04-07 07:53:37 +00:00
lindnermarek
6b95584211
make glibc compile & install properly
...
locale support added (modify the SUPPORTED file if needed)
2009-04-06 10:48:09 +00:00
xiangfu
75c9bd2885
-this patch is for the gcc-4.3
...
-now the glibc can make sucess. still cann't make install
2009-04-06 07:31:48 +00:00
xiangfu
343ddddc8b
add usbboot device code
2009-04-05 18:14:39 +00:00
xiangfu
113bbae11e
add kernel patch
2009-04-05 17:52:34 +00:00
xiangfu
5c31ed05b7
add nand flash tools
2009-04-05 16:26:33 +00:00
xiangfu
e043feab69
add build u-boot
2009-04-05 16:22:48 +00:00
xiangfu
bdb8bc25d6
mv pathchs to the toolchain dir
2009-04-05 13:11:59 +00:00
xiangfu
7f9ba8ab67
add u-boot patch
2009-04-05 13:05:47 +00:00
xiangfu
d7ff2fccb1
add linux-headers to compile glibc
2009-04-05 10:26:40 +00:00
xiangfu
a03f50dc0d
test commit log
2009-04-04 02:20:03 +00:00
lindnermarek
fcfc0fa90d
initial commit - fails to build at glibc patches
2009-04-03 17:05:20 +00:00
Andy Green
796fea906e
qi-3d7k-more-suspend-gpio-meddle.patch
...
Signed-off-by: Andy Green <andy@openmoko.com>
2009-03-12 09:05:12 +00:00
Christopher Hall
683fc5a92a
My revised version of the partition tool
...
The fdisk and mkfs was factored out into a shell function
so that it is easier to create dirfferent partition layouts.
The default case was left the same as the original script
The partitions can be specified as percentages of the
available space (after Qi reserved space has been taken out)
by providing a comma separated list of values:
e.g. 25,0,50
Which would create partitions 1 and 3 with 25% and 50%
of the usable capacity. Partitions 2 and 4 would not be
assigned.
Signed-off-by: Christopher Hall <hsw@openmoko.com>
2009-03-11 07:32:15 +00:00
Andy Green
8b75ed7105
qi-3d7k-additional-power-reg-config.patch
...
Signed-off-by: Andy Green <andy@openmoko.com>
2009-03-11 07:32:15 +00:00
Andy Green
e8899ba1e1
qi-3d7k-suspend-gpio-tune.patch
...
Signed-off-by: Andy Green <andy@openmoko.com>
2009-03-11 07:32:14 +00:00
Andy Green
d823b1732a
qi-3d7k-gate-all-unused-clocks.patch
...
s3c6410 defaults to all clocks up, this leads to 120mA idle current at 5V.
Gating all the unused clocks off gets us down to 76mA idle current at 533Mhz
CPU clock down to 133MHz only helps by a further ~1.5mA.
During these tests camera unit was active with no camera attached, no EDGE.
Signed-off-by: Andy Green <andy@openmoko.com>
2009-03-10 09:14:05 +00:00
Christopher Hall
3b3f2857a9
Possible mistake in qi/6410-partition.sh
...
Hello Andy,
I am in the process of making a modified 6410-partition.sh
and I wonder if there is a mistake in the VFAT partition size:
Shouldn't the "+ $REARSECTORS" in the FATSECTORS calculation
be a subtraction, otherwise the backupfs will overlap the
space reserved for Qi at the end of the SD Card.
Please look at this dif to see what I mean:
2009-03-09 12:00:57 +00:00
