/* * (C) Copyright 2007 OpenMoko, Inc. * Author: Harald Welte * * Configuation settings for the FIC Neo1973 GTA02 Linux GSM phone * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __CONFIG_H #define __CONFIG_H #define TEXT_BASE 0x00000000 /* xiangfu add*/ /* we want to be able to start u-boot directly from within NAND flash */ #define CONFIG_LL_INIT_NAND_ONLY #define CONFIG_S3C2410_NAND_BOOT 1 #define CONFIG_S3C2410_NAND_SKIP_BAD 1 #define CFG_UBOOT_SIZE 0x40000 /* size of u-boot, for NAND loading */ /* * High Level Configuration Options * (easy to change) */ #define CONFIG_ARM920T 1 /* This is an ARM920T Core */ #define CONFIG_SMDK2440 1 /* on a SAMSUNG SMDK2410 Board */ /* input clock of PLL */ #define CONFIG_SYS_CLK_FREQ 12000000/* the GTA02 has this input clock */ #define USE_920T_MMU 1 #define CONFIG_USE_IRQ 1 /* * Size of malloc() pool */ #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 400*1024) /* >> CFG_VIDEO_LOGO_MAX_SIZE */ #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers */ /* * select serial console configuration */ #define CONFIG_SERIAL3 1 /* we use SERIAL 1 on GTA01 */ #define CONFIG_SERIAL_MULTI /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_BAUDRATE 115200 /*********************************************************** * Command definition ***********************************************************/ #define CONFIG_CMD_BDI #define CONFIG_CMD_LOADS #define CONFIG_CMD_LOADB #define CONFIG_CMD_IMI #define CONFIG_CMD_CACHE #define CONFIG_CMD_MEMORY #define CONFIG_CMD_ENV /* CFG_CMD_IRQ | */ \ #define CONFIG_CMD_BOOTD #define CONFIG_CMD_CONSOLE /* CFG_CMD_BMP | */ \ #define CONFIG_CMD_ASKENV #define CONFIG_CMD_RUN #define CONFIG_CMD_ECHO #define CONFIG_CMD_I2C #define CONFIG_CMD_REGINFO #define CONFIG_CMD_IMMAP #define CONFIG_CMD_DATE #define CONFIG_CMD_AUTOSCRIPT #define CONFIG_CMD_BSP #define CONFIG_CMD_ELF #define CONFIG_CMD_MISC /* CFG_CMD_USB | */ \ #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_DIAG /* CFG_CMD_HWFLOW | */ \ #define CONFIG_CMD_SAVES #define CONFIG_CMD_NAND #define CONFIG_CMD_FLASH #define CONFIG_CMD_PORTIO #define CONFIG_CMD_MMC #define CONFIG_CMD_FAT #define CONFIG_CMD_EXT2 #define CONFIG_CMD_LICENSE #define CONFIG_CMD_TERMINAL #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTARGS "" #define CONFIG_BOOTCOMMAND "setenv bootargs ${bootargs_base} ${mtdparts}; nand read.e 0x32000000 kernel; bootm 0x32000000" #define CONFIG_DOS_PARTITION 1 #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ /* what's this ? it's not used anywhere */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ #endif /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define STRINGIFY(s) DO_STRINGIFY(s) /* expand the argument */ #define DO_STRINGIFY(s) #s /* quote it */ #define CFG_PROMPT __cfg_prompt /* Monitor Command Prompt */ #ifndef __ASSEMBLY__ /*extern char __cfg_prompt[20];*/ #endif #if defined(CONFIG_ARCH_GTA02_v1) #define CONFIG_S3C2440 1 /* SAMSUNG S3C2440 SoC */ #else #define CONFIG_S3C2442 1 /* SAMSUNG S3C2442 SoC */ #endif #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ #define CFG_MAXARGS 64 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_MEMTEST_START 0x30000000 /* memtest works on */ #define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ #define CFG_LOAD_ADDR 0x33000000 /* default load address */ /* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ /* it to wrap 100 times (total 1562500) to get 1 sec. */ #define CFG_HZ 1562500 /* valid baudrates */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CFG_BOOTMENU /*----------------------------------------------------------------------- * Stack sizes * * The stack sizes are set up in start.S using the settings below */ #define CONFIG_STACKSIZE (128*1024) /* regular stack */ #ifdef CONFIG_USE_IRQ #define CONFIG_STACKSIZE_IRQ (8*1024) /* IRQ stack */ #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ #endif #if 0 #define CONFIG_USB_OHCI_NEW 1 #define CFG_USB_OHCI_CPU_INIT 1 #define CFG_USB_OHCI_REGS_BASE 0x49000000 /* S3C24X0_USB_HOST_BASE */ #define CFG_USB_OHCI_SLOT_NAME "s3c2440" #define CFG_USB_OHCI_MAX_ROOT_PORTS 2 #endif #define CONFIG_USB_DEVICE 1 #define CONFIG_USB_TTY 1 #define CFG_CONSOLE_IS_IN_ENV 1 #define CONFIG_USBD_VENDORID 0x1d50 /* OpenMoko, Inc. */ #define CONFIG_USBD_PRODUCTID_GSERIAL 0x5120 /* gserial */ #define CONFIG_USBD_PRODUCTID_CDCACM 0x5119 /* CDC ACM */ #define CONFIG_USBD_MANUFACTURER "OpenMoko, Inc" #define CONFIG_USBD_PRODUCT_NAME "Neo1973 Bootloader " U_BOOT_VERSION #define CONFIG_USBD_DFU 1 #define CONFIG_USBD_DFU_XFER_SIZE 4096 /* 0x4000 */ #define CONFIG_USBD_DFU_INTERFACE 2 #define CONFIG_EXTRA_ENV_SETTINGS \ "usbtty=cdc_acm\0" \ "stderr=usbtty\0stdout=usbtty\0stdin=usbtty\0" \ "bootargs_base=rootfstype=jffs2 root=/dev/mtdblock6 console=ttySAC2,115200 console=tty0 loglevel=8\0" \ "" #define CONFIG_CMD_LOADENV #define CONFIG_CMD_DEFAULTENV /*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ #define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ #define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */ /*----------------------------------------------------------------------- * FLASH and environment organization */ #define CFG_ENV_IS_IN_NAND 1 #define CFG_ENV_SIZE 0x40000 /* 128k Total Size of Environment Sector */ #define CFG_ENV_OFFSET_OOB 1 /* Location of ENV stored in block 0 OOB */ #define CFG_PREBOOT_OVERRIDE 1 /* allow preboot from memory */ #define CFG_ENV_OVERRIDE /* allow pre-loading the environment */ #define NAND_MAX_CHIPS 1 #define CFG_NAND_BASE 0x4e000000 #define CFG_MAX_NAND_DEVICE 1 #define CONFIG_MMC 1 #define CONFIG_MMC_WIDE 1 #define CONFIG_MMC_GLAMO 1 #define CFG_MMC_BASE 0xff000000 #define CONFIG_DEPOWER_MMC_ON_BOOT 1 /* EXT2 driver */ #define CONFIG_EXT2 1 #define CONFIG_FAT 1 #define CONFIG_SUPPORT_VFAT #if 1 /* JFFS2 driver */ #define CONFIG_JFFS2_CMDLINE 1 #define CONFIG_JFFS2_NAND 1 #define CONFIG_JFFS2_NAND_DEV 0 //#define CONFIG_JFFS2_NAND_OFF 0x634000 //#define CONFIG_JFFS2_NAND_SIZE 0x39cc000 #endif /* ATAG configuration */ #define CONFIG_INITRD_TAG 1 #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_CMDLINE_TAG 1 #define CONFIG_REVISION_TAG 1 #if 0 #define CONFIG_SERIAL_TAG 1 #endif #define CONFIG_DRIVER_S3C24X0_I2C 1 #define CONFIG_HARD_I2C 1 #define CFG_I2C_SPEED 400000 /* 400kHz according to PCF50633 data sheet */ #define CFG_I2C_SLAVE 0x7f /* we have a board_late_init() function */ #define BOARD_LATE_INIT 1 #if 1 #define CONFIG_VIDEO #define CONFIG_VIDEO_GLAMO3362 #define CONFIG_CFB_CONSOLE //#define CONFIG_VIDEO_LOGO //#define CONFIG_SPLASH_SCREEN #define CFG_VIDEO_LOGO_MAX_SIZE (640*480+1024+100) /* 100 = slack */ #define CONFIG_VIDEO_BMP_GZIP #define CONFIG_VGA_AS_SINGLE_DEVICE #define CONFIG_CMD_UNZIP #define VIDEO_FB_16BPP_PIXEL_SWAP #define VIDEO_KBD_INIT_FCT 0 #define VIDEO_TSTC_FCT serial_tstc #define VIDEO_GETC_FCT serial_getc #define CONFIG_GLAMO_BASE 0x08000000 #endif #define CONFIG_S3C2410_NAND_BBT 1 //#define CONFIG_S3C2410_NAND_HWECC 1 #define CONFIG_DRIVER_PCF50633 1 #define CONFIG_RTC_PCF50633 1 #define MTDIDS_DEFAULT "nor0=physmap-flash,nand0=neo1973-nand" //#define MTPARTS_DEFAULT "neo1973-nand:256k(u-boot),128k(u-boot_env),8M(kernel),640k(splash),256k(factory),-(rootfs)" #define CFG_MTDPARTS_PREFIX "physmap-flash:-(nor);" #define CFG_NAND_DYNPART_MTD_KERNEL_NAME "neo1973-nand" #define CONFIG_NAND_DYNPART #define CFG_MAX_FLASH_BANKS 1 #define CFG_MAX_FLASH_SECT 1 #define DFU_NUM_ALTERNATES 7 #ifndef __ASSEMBLY__ /*extern int gta02_revision;*/ /* use this instead of CONFIG_GTA02_REVISION */ #endif #endif /* __CONFIG_H */