mirror of
git://projects.qi-hardware.com/xburst-tools.git
synced 2024-11-23 09:35:54 +02:00
607 lines
11 KiB
C
Executable File
607 lines
11 KiB
C
Executable File
/*
|
|
* Common NAND Flash operations for JZ4730.
|
|
*
|
|
* This software is free.
|
|
*/
|
|
|
|
#include "jz4730.h"
|
|
#include "include.h"
|
|
|
|
unsigned int EMC_BASE;
|
|
extern struct nand_oobinfo oob_64[];
|
|
|
|
/*
|
|
* Standard NAND commands.
|
|
*/
|
|
#define CMD_READA 0x00
|
|
#define CMD_READB 0x01
|
|
#define CMD_READC 0x50
|
|
#define CMD_ERASE_SETUP 0x60
|
|
#define CMD_ERASE 0xD0
|
|
#define CMD_READ_STATUS 0x70
|
|
#define CMD_CONFIRM 0x30
|
|
#define CMD_SEQIN 0x80
|
|
#define CMD_PGPROG 0x10
|
|
#define CMD_READID 0x90
|
|
#define CMD_RESET 0xff
|
|
|
|
#define ECC_BLOCK 256 /* 3-bytes HW ECC per 256-bytes data */
|
|
#define ECC_OFFSET 4 /* ECC store location offset to the spare area */
|
|
|
|
/*
|
|
* NAND routines.
|
|
*/
|
|
#define nand_enable() (REG_EMC_NFCSR |= EMC_NFCSR_NFE | EMC_NFCSR_FCE)
|
|
#define nand_disable() (REG_EMC_NFCSR &= ~(EMC_NFCSR_NFE | EMC_NFCSR_FCE))
|
|
#define nand_ecc_enable() (REG_EMC_NFCSR |= EMC_NFCSR_ECCE | EMC_NFCSR_ERST)
|
|
#define nand_ecc_disable() (REG_EMC_NFCSR &= ~EMC_NFCSR_ECCE)
|
|
#define nand_ready() (REG_EMC_NFCSR & EMC_NFCSR_RB)
|
|
#define nand_ecc() (REG_EMC_NFECC & 0x00ffffff)
|
|
#define nand_cmd(n) (REG8(cmdport+csn) = (n))
|
|
#define nand_addr(n) (REG8(addrport+csn) = (n))
|
|
#define nand_data8() REG8(dataport+csn)
|
|
#define nand_data16() REG16(dataport+csn)
|
|
|
|
static inline void nand_wait_ready(void)
|
|
{
|
|
u32 to = 1000;
|
|
while (nand_ready() && to--);
|
|
while (!nand_ready());
|
|
}
|
|
|
|
static volatile unsigned char *emcbase = 0;
|
|
static volatile unsigned char *addrport = 0;
|
|
static volatile unsigned char *dataport = 0;
|
|
static volatile unsigned char *cmdport = 0;
|
|
|
|
static u32 bus = 8, row = 2, pagesize = 512, oobsize = 16, ppb = 32;
|
|
static u32 bad_block_pos = 0 , bad_block_page =0, csn =0;
|
|
static struct nand_oobinfo *oob_pos;
|
|
static np_data *np;
|
|
|
|
/*
|
|
* notify(int param)
|
|
*
|
|
* param value:
|
|
* 0 : Ok
|
|
* -1: page op fail
|
|
* -2: hit bad block, skip it.
|
|
*/
|
|
|
|
static int (*write_proc)(unsigned char *, int) = 0;
|
|
static int (*read_proc)(unsigned char *, int) = 0;
|
|
|
|
static u8 badbuf[2048 + 64] = {0};
|
|
static u8 oobbuf[64] = {0};
|
|
|
|
|
|
/*
|
|
* I/O read/write interface.
|
|
*/
|
|
static inline int nand_data_write8(unsigned char *buf, int count)
|
|
{
|
|
int i;
|
|
u8 *p = (u8 *)buf;
|
|
|
|
for (i = 0; i < count; i++)
|
|
nand_data8() = *p++;
|
|
return 0;
|
|
}
|
|
|
|
static inline int nand_data_write16(unsigned char *buf, int count)
|
|
{
|
|
int i;
|
|
u16 *p = (u16 *)buf;
|
|
|
|
for (i = 0; i < count/2; i++)
|
|
nand_data16() = *p++;
|
|
return 0;
|
|
}
|
|
|
|
static inline int nand_data_read8(unsigned char *buf, int count)
|
|
{
|
|
int i;
|
|
u8 *p = (u8 *)buf;
|
|
|
|
for (i = 0; i < count; i++)
|
|
*p++ = nand_data8();
|
|
return 0;
|
|
}
|
|
|
|
static inline int nand_data_read16(unsigned char *buf, int count)
|
|
{
|
|
int i;
|
|
u16 *p = (u16 *)buf;
|
|
|
|
for (i = 0; i < count/2; i++)
|
|
*p++ = nand_data16();
|
|
return 0;
|
|
}
|
|
|
|
int chip_select_4730(u8 cs)
|
|
{
|
|
csn = (u32)cs << 15; //modify this number for your board
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Init nand parameters and enable nand controller.
|
|
*/
|
|
int nand_init_4730(np_data *npp)
|
|
{
|
|
bus = npp->bw;
|
|
row = npp->rc;
|
|
pagesize = npp->ps;
|
|
oobsize = npp->os;
|
|
ppb = npp->ppb;
|
|
bad_block_pos = npp->bbp;
|
|
bad_block_page = npp->bba;
|
|
|
|
if (bus == 8) {
|
|
write_proc = nand_data_write8;
|
|
read_proc = nand_data_read8;
|
|
} else {
|
|
write_proc = nand_data_write16;
|
|
read_proc = nand_data_read16;
|
|
}
|
|
emcbase = (u8 *)npp->base_map;
|
|
dataport = (u8 *)npp->port_map;
|
|
addrport = (u8 *)((u32)dataport + npp->ap_offset);
|
|
cmdport = (u8 *)((u32)dataport + npp->cp_offset);
|
|
|
|
EMC_BASE = (u32)emcbase;
|
|
oob_pos = &oob_64[npp->ep];
|
|
np = npp;
|
|
nand_enable();
|
|
chip_select_4730(npp->cs);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Disable nand operation.
|
|
*/
|
|
int nand_fini_4730(void)
|
|
{
|
|
nand_disable();
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Read ID.
|
|
*/
|
|
unsigned int nand_query_4730(void)
|
|
{
|
|
u16 vid, did;
|
|
|
|
nand_cmd(CMD_READID);
|
|
nand_addr(0);
|
|
|
|
vid = nand_data8();
|
|
did = nand_data8();
|
|
|
|
return (vid << 16) | did;
|
|
}
|
|
|
|
/*
|
|
* Read oob data for 512B pagesize.
|
|
*/
|
|
static void read_oob_512(void *buf, u32 oobsize, u32 pg)
|
|
{
|
|
int i;
|
|
u32 rowaddr;
|
|
|
|
rowaddr = pg;
|
|
|
|
nand_cmd(0x50);
|
|
nand_addr(0);
|
|
for (i = 0; i < row; i++) {
|
|
nand_addr(rowaddr & 0xff);
|
|
rowaddr >>= 8;
|
|
}
|
|
nand_wait_ready();
|
|
|
|
read_proc(buf, oobsize);
|
|
}
|
|
|
|
/*
|
|
* Read oob data for 2KB pagesize.
|
|
*/
|
|
static void read_oob_2048(u8 *buf, u32 oobsize, u32 pg)
|
|
{
|
|
u32 i, coladdr, rowaddr;
|
|
|
|
|
|
coladdr = 2048;
|
|
rowaddr = pg;
|
|
|
|
nand_cmd(CMD_READA);
|
|
nand_addr(coladdr & 0xff);
|
|
nand_addr(coladdr >> 8);
|
|
for (i = 0; i < row; i++) {
|
|
nand_addr(rowaddr & 0xff);
|
|
rowaddr >>= 8;
|
|
}
|
|
nand_cmd(CMD_CONFIRM);
|
|
nand_wait_ready();
|
|
read_proc(buf, oobsize);
|
|
}
|
|
|
|
/*
|
|
* Read oob data.
|
|
*/
|
|
static void read_oob(u8 *buf, int oobsize, int pg)
|
|
{
|
|
if (pagesize == 2048)
|
|
read_oob_2048(buf, oobsize, pg);
|
|
else
|
|
read_oob_512(buf, oobsize, pg);
|
|
}
|
|
|
|
/*
|
|
* Return 1 if the block is bad block, else return 0.
|
|
*/
|
|
int nand_check_block(u32 block)
|
|
{
|
|
u32 pg;
|
|
|
|
// pg = block * ppb;
|
|
pg = block * ppb + bad_block_page;
|
|
//bad block ID locate No.bad_block_page
|
|
read_oob(oobbuf, oobsize, pg);
|
|
if (oobbuf[bad_block_pos] != 0xff)
|
|
return -1;
|
|
read_oob(oobbuf, oobsize, pg + 1);
|
|
if (oobbuf[bad_block_pos] != 0xff)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Mark a block bad.
|
|
*/
|
|
void nand_block_markbad(u32 block)
|
|
{
|
|
u32 i, rowaddr;
|
|
|
|
for (i = 0; i < pagesize + oobsize; i++)
|
|
badbuf[i] = 0xff;
|
|
badbuf[pagesize + bad_block_pos] = 0; /* bad block flag */
|
|
|
|
rowaddr = block * ppb + bad_block_page;
|
|
//bad block ID locate No.bad_block_page
|
|
|
|
nand_cmd(CMD_READA);
|
|
nand_cmd(CMD_SEQIN);
|
|
|
|
nand_addr(0);
|
|
if (pagesize == 2048)
|
|
nand_addr(0);
|
|
for (i = 0; i < row; i++) {
|
|
nand_addr(rowaddr & 0xff);
|
|
rowaddr >>= 8;
|
|
}
|
|
|
|
write_proc((unsigned char *)badbuf, pagesize + oobsize);
|
|
nand_cmd(CMD_PGPROG);
|
|
nand_wait_ready();
|
|
}
|
|
|
|
/*
|
|
* Erase <blk_num> blocks from block <sblk>.
|
|
*/
|
|
int nand_erase_4730(int blk_num, int sblk, int force)
|
|
{
|
|
int i, cnt;
|
|
u32 cur_blk, rowaddr;
|
|
|
|
force = 0;
|
|
/* Send reset command to nand */
|
|
nand_cmd(CMD_RESET);
|
|
nand_wait_ready();
|
|
|
|
cur_blk = sblk;
|
|
cnt = 0;
|
|
while (cnt < blk_num) {
|
|
/*
|
|
* if force flag was not set, check for bad block.
|
|
* if force flag was set, erase anything.
|
|
*/
|
|
#if 1
|
|
//we do force erase for ever??
|
|
if (!force) {
|
|
if (nand_check_block(cur_blk)) {
|
|
cur_blk ++; /* Bad block, set to next block */
|
|
continue;
|
|
}
|
|
}
|
|
#endif
|
|
nand_cmd(CMD_ERASE_SETUP);
|
|
|
|
rowaddr = cur_blk * ppb;
|
|
for (i = 0; i < row; i++) {
|
|
nand_addr(rowaddr & 0xff);
|
|
rowaddr >>= 8;
|
|
}
|
|
|
|
nand_cmd(CMD_ERASE);
|
|
nand_wait_ready();
|
|
|
|
nand_cmd(CMD_READ_STATUS);
|
|
nand_wait_ready();
|
|
|
|
if (nand_data8() & 0x01) {
|
|
/* Erase Error, mark it as bad block */
|
|
nand_block_markbad(cur_blk);
|
|
|
|
} else {
|
|
/* Erase OK */
|
|
cnt++;
|
|
}
|
|
cur_blk++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Do nand hw ecc correction.
|
|
*/
|
|
int nand_hw_ecc_correct(u8 *buf, u8 *stored_ecc, u8 *calc_ecc, int eccblock)
|
|
{
|
|
u32 i, j, ecc_bit,a,b,c,tmp;
|
|
int res = 0;
|
|
|
|
for (i = 0; i < eccblock; i++) {
|
|
a=stored_ecc[oob_pos->eccpos[i*3+0]] ^ calc_ecc[i*4+0];
|
|
b=stored_ecc[oob_pos->eccpos[i*3+1]] ^ calc_ecc[i*4+1];
|
|
c=stored_ecc[oob_pos->eccpos[i*3+2]] ^ calc_ecc[i*4+2];
|
|
tmp = (c<<16) + (b<<8) +a;
|
|
#if 0
|
|
printf("AAAAAAAA %x %x %x : %x %x %x %x\n",
|
|
stored_ecc[oob_pos->eccpos[i*3+0]],
|
|
stored_ecc[oob_pos->eccpos[i*3+1]],
|
|
stored_ecc[oob_pos->eccpos[i*3+2]],
|
|
calc_ecc[i*4+0],
|
|
calc_ecc[i*4+1],
|
|
calc_ecc[i*4+2],
|
|
tmp);
|
|
#endif
|
|
if (tmp) { /* ECC error */
|
|
ecc_bit = 0;
|
|
for (j = 0; j < 24; j++)
|
|
if ((tmp >> j) & 0x01)
|
|
ecc_bit ++;
|
|
if (ecc_bit == 11) { /* Correctable error */
|
|
u8 idx;
|
|
|
|
ecc_bit = 0;
|
|
for (j = 12; j >= 1; j--) {
|
|
ecc_bit <<= 1;
|
|
ecc_bit |= ((tmp >> (j*2-1)) & 0x01);
|
|
}
|
|
idx = ecc_bit & 0x07;
|
|
|
|
buf[i * ECC_BLOCK + (ecc_bit >> 3)] ^= (1 << idx);
|
|
}
|
|
else { /* Fatal error */
|
|
//if ecc all ff means this page no data!
|
|
if (stored_ecc[oob_pos->eccpos[i*3+0]]==0xff
|
|
&&stored_ecc[oob_pos->eccpos[i*3+1]]==0xff
|
|
&&stored_ecc[oob_pos->eccpos[i*3+2]]==0xff )
|
|
return res;
|
|
// printf("Uncorrectable ecc error!\n");
|
|
res = -1;
|
|
}
|
|
}
|
|
}
|
|
return res;
|
|
}
|
|
|
|
/*
|
|
* Read data <pagenum> pages from <startpage> page.
|
|
* Skip bad block if detected.
|
|
* HW ECC is used.
|
|
*/
|
|
int nand_read_4730(u8 *buf, u32 startpage, u32 pagenum)
|
|
{
|
|
u32 cnt, i;
|
|
u32 cur_page, rowaddr, eccblock;
|
|
u32 calc_ecc[8];
|
|
u8 *tmpbuf,*stored_ecc;
|
|
|
|
eccblock = pagesize / ECC_BLOCK;
|
|
cur_page = startpage;
|
|
cnt = 0;
|
|
while (cnt < pagenum) {
|
|
|
|
//we do not check bad block here!
|
|
#if 0
|
|
if ((cur_page % ppb) == 0) {
|
|
cur_blk = cur_page / ppb;
|
|
if (nand_check_block(cur_blk)) {
|
|
cur_page += ppb; /* Bad block, set to next block */
|
|
continue;
|
|
}
|
|
}
|
|
#endif
|
|
nand_cmd(CMD_READA);
|
|
nand_addr(0);
|
|
if (pagesize == 2048)
|
|
nand_addr(0);
|
|
|
|
rowaddr = cur_page;
|
|
for (i = 0; i < row; i++) {
|
|
nand_addr(rowaddr & 0xff);
|
|
rowaddr >>= 8;
|
|
}
|
|
if (pagesize == 2048)
|
|
nand_cmd(CMD_CONFIRM);
|
|
|
|
nand_wait_ready();
|
|
tmpbuf = (u8 *)((u32)buf + cnt * (pagesize + oobsize));
|
|
for (i = 0; i < eccblock; i++) {
|
|
nand_ecc_enable();
|
|
read_proc(tmpbuf, ECC_BLOCK);
|
|
nand_ecc_disable();
|
|
calc_ecc[i] = nand_ecc();
|
|
if (oob_pos->eccname == LINUXHM)
|
|
calc_ecc[i] = ~(calc_ecc[i]) | 0x00030000;
|
|
tmpbuf += ECC_BLOCK;
|
|
}
|
|
read_proc((u8 *)tmpbuf, oobsize);
|
|
tmpbuf = (u8 *)((u32)buf + cnt * (pagesize + oobsize));
|
|
//read ecc from oob
|
|
stored_ecc = (u8 *)(((u32)tmpbuf) + pagesize );
|
|
|
|
/* Check ECC */
|
|
nand_hw_ecc_correct(tmpbuf, stored_ecc, (u8 *)calc_ecc, eccblock);
|
|
cur_page++;
|
|
cnt++;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Read data <pagenum> pages from <startpage> page.
|
|
* Don't skip bad block.
|
|
* Don't use HW ECC.
|
|
*/
|
|
int nand_read_raw_4730(u8 *buf, u32 startpage, u32 pagenum)
|
|
{
|
|
u32 cnt, i;
|
|
u32 cur_page, rowaddr;
|
|
u8 *tmpbuf;
|
|
|
|
tmpbuf = (u8 *)buf;
|
|
|
|
cur_page = startpage;
|
|
cnt = 0;
|
|
while (cnt < pagenum) {
|
|
nand_cmd(CMD_READA);
|
|
nand_addr(0);
|
|
if (pagesize == 2048)
|
|
nand_addr(0);
|
|
|
|
rowaddr = cur_page;
|
|
for (i = 0; i < row; i++) {
|
|
nand_addr(rowaddr & 0xff);
|
|
rowaddr >>= 8;
|
|
}
|
|
|
|
if (pagesize == 2048)
|
|
nand_cmd(CMD_CONFIRM);
|
|
|
|
nand_wait_ready();
|
|
|
|
read_proc(tmpbuf, pagesize);
|
|
|
|
tmpbuf += pagesize;
|
|
cur_page++;
|
|
cnt++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Read oob <pagenum> pages from <startpage> page.
|
|
* Don't skip bad block.
|
|
* Don't use HW ECC.
|
|
*/
|
|
int nand_read_oob_4730(u8 *buf, u32 startpage, u32 pagenum)
|
|
{
|
|
u32 cnt, cur_page;
|
|
u8 *tmpbuf;
|
|
|
|
tmpbuf = (u8 *)buf;
|
|
|
|
cur_page = startpage;
|
|
cnt = 0;
|
|
while (cnt < pagenum) {
|
|
read_oob((void *)tmpbuf, oobsize, cur_page);
|
|
|
|
tmpbuf += oobsize;
|
|
cur_page++;
|
|
cnt++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Write <pagenum> pages from <startpage> page.
|
|
* Skip bad block if detected.
|
|
*/
|
|
int nand_program_4730(u8 *buf, int startpage, int pagenum)
|
|
{
|
|
u32 cnt, i,j;
|
|
u32 cur_page, rowaddr, eccblock;
|
|
u8 *tmpbuf;
|
|
|
|
tmpbuf = (u8 *)buf;
|
|
|
|
eccblock = pagesize / ECC_BLOCK;
|
|
|
|
cur_page = startpage;
|
|
cnt = 0;
|
|
while (cnt < pagenum) {
|
|
//do not check bad block here! check uplayer!
|
|
|
|
for (j=0;j<np->os;j++)
|
|
{
|
|
if (tmpbuf[j+np->ps]!=0xff)
|
|
break;
|
|
}
|
|
|
|
if (j==np->os)
|
|
{
|
|
tmpbuf += np->ps+np->os;
|
|
cur_page ++;
|
|
cnt ++;
|
|
continue;
|
|
}
|
|
|
|
// nand_wait_ready();
|
|
nand_cmd(CMD_READA);
|
|
nand_cmd(CMD_SEQIN);
|
|
|
|
nand_addr(0);
|
|
if (pagesize == 2048)
|
|
nand_addr(0);
|
|
|
|
rowaddr = cur_page;
|
|
for (i = 0; i < row; i++) {
|
|
nand_addr(rowaddr & 0xff);
|
|
rowaddr >>= 8;
|
|
}
|
|
|
|
/* Write out data and oob*/
|
|
// we don't need work out ecc
|
|
//because it already exist in image file
|
|
|
|
write_proc(tmpbuf, np->ps+np->os);
|
|
tmpbuf += np->ps+np->os;
|
|
nand_cmd(CMD_PGPROG);
|
|
nand_wait_ready();
|
|
|
|
nand_cmd(CMD_READ_STATUS);
|
|
// nand_wait_ready();
|
|
|
|
if (nand_data8() & 0x01) {
|
|
/* Page program error.
|
|
* Note: we should mark this block bad, and copy data of this
|
|
* block to a new block.
|
|
*/
|
|
;
|
|
} else {
|
|
;
|
|
}
|
|
|
|
cur_page ++;
|
|
cnt ++;
|
|
}
|
|
return cnt;
|
|
}
|