Andy Green ec8ea0c281 add-ext2-fs.patch ... This adds ext2 support from U-Boot and stitches it into the partition stuff. It also upgrades the board definitions so they can define the path to look for in the ext2 filesystem being mounted. I used /boot/uImage.bin because this is already in use by the packaged kernel. We now mount, open and pull the kernel from ext2 in phase2.c if the kernel source defines it. Signed-off-by: Andy Green <andy@openmoko.com>		2008-11-28 10:16:37 +00:00
..
ext2.h	add-ext2-fs.patch	2008-11-28 10:16:37 +00:00
fat.h	change-drivers-dir.patch	2008-11-28 10:16:36 +00:00
glamo-init.h	add-glamo-init.patch	2008-11-28 10:16:36 +00:00
glamo-mmc.h	add-glmo-mmc.patch	2008-11-28 10:16:37 +00:00
glamo-regs.h	add-glmo-mmc.patch	2008-11-28 10:16:37 +00:00
i2c-bitbang-s3c24xx.h	introduce-i2c.patch	2008-11-28 10:16:36 +00:00
i2c-bitbang.h	introduce-i2c.patch	2008-11-28 10:16:36 +00:00
image.h	add-ext2-fs.patch	2008-11-28 10:16:37 +00:00
mmc.h	add-glmo-mmc.patch	2008-11-28 10:16:37 +00:00
neo_gta02.h	add-per-board-init-change-qi.patch	2008-11-28 10:16:36 +00:00
neo_gta03.h	add gta03 board specific support	2008-11-28 10:16:36 +00:00
pcf50633.h	add-pcf50633-include.patch	2008-11-28 10:16:36 +00:00
ports-s3c24xx.h	clean-serial-c-into-drivers.patch	2008-11-28 10:16:36 +00:00
qi-ctype.h	move-kboot.h-to-include.patch	2008-11-28 10:16:35 +00:00
qi.h	add-ext2-fs.patch	2008-11-28 10:16:37 +00:00
serial-s3c24xx.h	clean-serial-c-into-drivers.patch	2008-11-28 10:16:36 +00:00
setup.h	add-kernel-init.patch	2008-08-13 00:44:29 +01:00