mirror of
git://projects.qi-hardware.com/xue.git
synced 2024-12-29 13:09:53 +02:00
191 lines
9.0 KiB
Plaintext
191 lines
9.0 KiB
Plaintext
Disclaimer of Warranty:
|
|
-----------------------
|
|
This software code and all associated documentation, comments or other
|
|
information (collectively "Software") is provided "AS IS" without
|
|
warranty of any kind. MICRON TECHNOLOGY, INC. ("MTI") EXPRESSLY
|
|
DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
|
|
TO, NONINFRINGEMENT OF THIRD PARTY RIGHTS, AND ANY IMPLIED WARRANTIES
|
|
OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. MTI DOES NOT
|
|
WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS, OR THAT THE
|
|
OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE.
|
|
FURTHERMORE, MTI DOES NOT MAKE ANY REPRESENTATIONS REGARDING THE USE OR
|
|
THE RESULTS OF THE USE OF THE SOFTWARE IN TERMS OF ITS CORRECTNESS,
|
|
ACCURACY, RELIABILITY, OR OTHERWISE. THE ENTIRE RISK ARISING OUT OF USE
|
|
OR PERFORMANCE OF THE SOFTWARE REMAINS WITH YOU. IN NO EVENT SHALL MTI,
|
|
ITS AFFILIATED COMPANIES OR THEIR SUPPLIERS BE LIABLE FOR ANY DIRECT,
|
|
INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR SPECIAL DAMAGES (INCLUDING,
|
|
WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION,
|
|
OR LOSS OF INFORMATION) ARISING OUT OF YOUR USE OF OR INABILITY TO USE
|
|
THE SOFTWARE, EVEN IF MTI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
|
|
DAMAGES. Because some jurisdictions prohibit the exclusion or
|
|
limitation of liability for consequential or incidental damages, the
|
|
above limitation may not apply to you.
|
|
|
|
Copyright 2003 Micron Technology, Inc. All rights reserved.
|
|
|
|
Getting Started:
|
|
----------------
|
|
Unzip the included files to a folder.
|
|
Compile ddr2.v, ddr2_mcp.v, and tb.v using a verilog simulator.
|
|
Simulate the top level test bench tb.
|
|
Or, if you are using the ModelSim simulator, type "do tb.do" at the prompt.
|
|
|
|
File Descriptions:
|
|
------------------
|
|
ddr2.v -ddr2 model
|
|
ddr2_mcp.v -structural wrapper for ddr2 - multi-chip package model
|
|
ddr2_module.v -structural wrapper for ddr2 - module model
|
|
ddr2_parameters.vh -file that contains all parameters used by the model
|
|
readme.txt -this file
|
|
tb.v -ddr2 model test bench
|
|
subtest.vh -example test included by the test bench.
|
|
tb.do -compiles and runs the ddr2 model and test bench
|
|
|
|
Defining the Speed Grade:
|
|
-------------------------
|
|
The verilog compiler directive "`define" may be used to choose between
|
|
multiple speed grades supported by the ddr2 model. Allowable speed
|
|
grades are listed in the ddr2_parameters.vh file and begin with the
|
|
letters "sg". The speed grade is used to select a set of timing
|
|
parameters for the ddr2 model. The following are examples of defining
|
|
the speed grade.
|
|
|
|
simulator command line
|
|
--------- ------------
|
|
ModelSim vlog +define+sg5 ddr2.v
|
|
NC-Verilog ncverilog +define+sg5 ddr2.v
|
|
VCS vcs +define+sg5 ddr2.v
|
|
|
|
Defining the Organization:
|
|
--------------------------
|
|
The verilog compiler directive "`define" may be used to choose between
|
|
multiple organizations supported by the ddr2 model. Valid
|
|
organizations include "x4", "x8", and x16, and are listed in the
|
|
ddr2_parameters.vh file. The organization is used to select the amount
|
|
of memory and the port sizes of the ddr2 model. The following are
|
|
examples of defining the organization.
|
|
|
|
simulator command line
|
|
--------- ------------
|
|
ModelSim vlog +define+x8 ddr2.v
|
|
NC-Verilog ncverilog +define+x8 ddr2.v
|
|
VCS vcs +define+x8 ddr2.v
|
|
|
|
All combinations of speed grade and organization are considered valid
|
|
by the ddr2 model even though a Micron part may not exist for every
|
|
combination.
|
|
|
|
Allocating Memory:
|
|
------------------
|
|
An associative array has been implemented to reduce the amount of
|
|
static memory allocated by the ddr2 model. Each entry in the
|
|
associative array is a burst length of eight in size. The number of
|
|
entries in the associative array is controlled by the MEM_BITS
|
|
parameter, and is equal to 2^MEM_BITS. For example, if the MEM_BITS
|
|
parameter is equal to 10, the associative array will be large enough
|
|
to store 1024 writes of burst length 8 to unique addresses. The
|
|
following are examples of setting the MEM_BITS parameter to 8.
|
|
|
|
simulator command line
|
|
--------- ------------
|
|
ModelSim vsim -GMEM_BITS=8 ddr2
|
|
NC-Verilog ncverilog +defparam+ddr2.MEM_BITS=8 ddr2.v
|
|
VCS vcs -pvalue+MEM_BITS=8 ddr2.v
|
|
|
|
It is possible to allocate memory for every address supported by the
|
|
ddr2 model by using the verilog compiler directive "`define MAX_MEM".
|
|
This procedure will improve simulation performance at the expense of
|
|
system memory. The following are examples of allocating memory for
|
|
every address.
|
|
|
|
Simulator command line
|
|
--------- ------------
|
|
ModelSim vlog +define+MAX_MEM ddr2.v
|
|
NC-Verilog ncverilog +define+MAX_MEM ddr2.v
|
|
VCS vcs +define+MAX_MEM ddr2.v
|
|
|
|
|
|
**********************************************************************
|
|
The following information is provided to assist the modeling engineer
|
|
in creating multi-chip package (mcp) models. ddr2_mcp.v is a
|
|
structural wrapper that instantiates ddr2 models. This wrapper can be
|
|
used to create single, dual, or quad rank mcp models. From the
|
|
perspective of the model, the only item that needs to be defined is the
|
|
number of ranks.
|
|
**********************************************************************
|
|
|
|
Defining the Number of Ranks in a multi-chip package:
|
|
----------------------------------------------------
|
|
The verilog compiler directive "`define" may be used to choose between
|
|
single, dual, and quad rank mcp configurations. The default is single
|
|
rank if nothing is defined. Dual rank configuration can be selected by
|
|
defining "DUAL_RANK" when the ddr2_mcp is compiled. Quad rank
|
|
configuration can be selected by defining "QUAD_RANK" when the ddr2_mcp
|
|
is compiled. The following are examples of defining a dual rank mcp
|
|
configuration.
|
|
|
|
simulator command line
|
|
--------- ------------
|
|
ModelSim vlog +define+DUAL_RANK ddr2.v ddr2_mcp.v
|
|
NC-Verilog ncverilog +define+DUAL_RANK ddr2.v ddr2_mcp.v
|
|
VCS vcs +define+DUAL_RANK ddr2.v ddr2_mcp.v
|
|
|
|
|
|
**********************************************************************
|
|
The following information is provided to assist the modeling engineer
|
|
in creating DIMM models. ddr2_module.v is a structural wrapper that
|
|
instantiates ddr2 models. This wrapper can be used to create UDIMM,
|
|
RDIMM or SODIMM models. Other form factors are not supported
|
|
(MiniDIMM, VLP DIMM, etc.). From the perspective of the model, the
|
|
items that need to be defined are the number of ranks, the module
|
|
type, and the presence of ECC. All combinations of ranks, module
|
|
type, and ECC are considered valid by the ddr2_module model even
|
|
though a Micron part may not exist for every combination.
|
|
**********************************************************************
|
|
|
|
Defining the Number of Ranks on a module:
|
|
----------------------------------------
|
|
The verilog compiler directive "`define" may be used to choose between
|
|
single, dual, and quad rank module configurations. The default is single
|
|
rank if nothing is defined. Dual rank configuration can be selected by
|
|
defining "DUAL_RANK" when the ddr2_module is compiled. Quad rank
|
|
configuration can be selected by defining "QUAD_RANK" when the ddr2_module
|
|
is compiled. The following are examples of defining a dual rank module
|
|
configuration.
|
|
|
|
simulator command line
|
|
--------- ------------
|
|
ModelSim vlog +define+DUAL_RANK ddr2.v ddr2_module.v
|
|
NC-Verilog ncverilog +define+DUAL_RANK ddr2.v ddr2_module.v
|
|
VCS vcs +define+DUAL_RANK ddr2.v ddr2_module.v
|
|
|
|
Defining the Module Type:
|
|
-----------------------------------
|
|
The verilog compiler directive "`define" may be used to choose between
|
|
UDIMM, RDIMM, and SODIMM module configurations. The default is
|
|
unregistered (UDIMM) if nothing is defined. SODIMM configuration can be
|
|
selected by defining "SODIMM" when the ddr2_module is compiled. Registered
|
|
configuration can be selected by defining "RDIMM" when the ddr2_module is
|
|
compiled. The following are examples of defining a registered module
|
|
configuration.
|
|
|
|
simulator command line
|
|
--------- ------------
|
|
ModelSim vlog +define+RDIMM ddr2.v ddr2_module.v
|
|
NC-Verilog ncverilog +define+RDIMM ddr2.v ddr2_module.v
|
|
VCS vcs +define+RDIMM ddr2.v ddr2_module.v
|
|
|
|
Defining the ECC for a module:
|
|
-----------------------------
|
|
The verilog compiler directive "`define" may be used to choose between
|
|
ECC and nonECC module configurations. The default is nonECC if nothing
|
|
is defined. ECC configuration can be selected by defining "ECC" when
|
|
the ddr2_module is compiled. The following are examples of defining an
|
|
ECC module configuration.
|
|
|
|
simulator command line
|
|
--------- ------------
|
|
ModelSim vlog +define+ECC ddr2.v ddr2_module.v
|
|
NC-Verilog ncverilog +define+ECC ddr2.v ddr2_module.v
|
|
VCS vcs +define+ECC ddr2.v ddr2_module.v
|