59 lines
2.4 KiB
Plaintext
59 lines
2.4 KiB
Plaintext
#
|
|
# cpu_diagcmds - IP20 CPU Diagnostic functions
|
|
#
|
|
# First column is the name
|
|
# Second column is the type:
|
|
# STR for string
|
|
# CMD for command
|
|
# INT for integer constant
|
|
# Third column is value:
|
|
# CMD value is the name of the function to call
|
|
# STR value is the quoted string
|
|
# INT value is the integer
|
|
#
|
|
# Columns must be separated by exactly one TAB!
|
|
audio CMD audio DSP audio diagnostics
|
|
buffoff CMD buffoff Turn off message buffering
|
|
buffon CMD buffon Turn on message buffering
|
|
checksum CMD checksum RANGE
|
|
clock CMD rt_clock clock counters carry
|
|
cpudsp_sram CMD dsp_sram CPU DSP SRAM data test
|
|
dcache1 CMD dcache_par Data cache data parity test
|
|
dram CMD dram_diagnostics [-p] [RANGE] DRAM (>4MB) data/address, parity test
|
|
dsp56 CMD dsp_diag DSP560001 diagnostics
|
|
duart CMD duart_loopback (-i|e)(0-5) DUART internal/external loopback
|
|
emfail CMD emfail Produce \"Electronics Module\" failure message
|
|
#enet1 CMD ethernet_register ethernet data/address port register
|
|
#enet2 CMD ethernet_loopback [-e] ethernet internal/external loopback
|
|
fpu CMD fptest Floating point diagnostics
|
|
help_mem CMD print_memory_diagram Print memory diagram
|
|
hinv CMD hinv Hardware Inventory
|
|
hpc1 CMD hpc1 HPC1 registers and fifos
|
|
icache1 CMD icache_par Instruction cache data parity test
|
|
icache2 CMD icache Instruction cache misc test
|
|
initgr CMD probe_graphics Initialize Graphics board (includes microcode downloading)
|
|
int2 CMD int2_mask int2 interrupt mask registers
|
|
ldram CMD low_memtest [-p] DRAM (0-4MB) data/address, parity test
|
|
led CMD sickled Turn health led on or off (usage: led (0|1) )
|
|
linpack CMD lpackd FPU LINPACK test
|
|
memtest CMD memory_test CPU memory test
|
|
memtest2 CMD memtest2_test CPU TEST
|
|
nvram1 CMD eeprom_address eeprom address
|
|
nvram3 CMD eeprom_data eeprom data
|
|
nvram4 CMD eeprom_id eeprom id
|
|
nvram5 CMD eeprom_pins eeprom pin signals
|
|
parity CMD parity_test memory parity checking mechanism
|
|
print1 CMD plp_write Parallel port write dma
|
|
print2 CMD plp_rdwr Parallel port read/write dma
|
|
print3 CMD plp_lpbk Parallel port loopback test
|
|
resetcons CMD resetcons Reset graphics console
|
|
scache1 CMD scache_ecc Secondary cache misc test
|
|
scsi CMD scsi SCSI
|
|
test CMD test misc
|
|
timer CMD timer timer frequency
|
|
tlb CMD tlbtest TLB
|
|
utlb CMD utlb_miss_exception UTLB miss exception
|
|
wait CMD wait Wait for <CR> to continue (usage: wait [\"message\"])
|
|
chg_volt CMD change_voltage change voltage on hp2
|
|
xscsi CMD exercise_scsi Exercise all SCSI disk drives found
|