77 lines
3.6 KiB
Plaintext
77 lines
3.6 KiB
Plaintext
#
|
|
# cpu_diagcmds - IP22 CPU Diagnostic functions
|
|
#
|
|
# First column is the name
|
|
# Second column is the type:
|
|
# STR for string
|
|
# CMD for command
|
|
# INT for integer constant
|
|
# Third column is value:
|
|
# CMD value is the name of the function to call
|
|
# STR value is the quoted string
|
|
# INT value is the integer
|
|
#
|
|
# Columns must be separated by exactly one TAB!
|
|
buffoff CMD buffoff Turn off message buffering
|
|
buffon CMD buffon Turn on message buffering
|
|
ttyprint CMD ttyprint Control printing to serial port
|
|
checksum CMD checksum RANGE
|
|
clock CMD rt_clock clock counters carry
|
|
dcache1 CMD dcache_par Data cache data parity test
|
|
dram CMD dram_diagnostics [-p] [RANGE] DRAM (>4MB) data/address, parity test
|
|
duart CMD duart_loopback (-i|e)(0-1) DUART internal/external loopback
|
|
emfail CMD emfail Produce \"Electronics Module\" failure message
|
|
#enet1 CMD ethernet_register ethernet data/address port register
|
|
#enet2 CMD ethernet_loopback [-e] ethernet internal/external loopback
|
|
fpu CMD fptest Floating point diagnostics
|
|
help_mem CMD print_memory_diagram Print memory diagram
|
|
hinv CMD hinv Hardware Inventory
|
|
hpc3 CMD hpc3 HPC3 registers and fifos
|
|
icache1 CMD icache_par Instruction cache data parity test
|
|
icache2 CMD icache Instruction cache misc test
|
|
initgr CMD probe_graphics Initialize Graphics board (includes microcode downloading)
|
|
int2 CMD int2_mask int2 interrupt mask registers
|
|
isdn_dis CMD isdn_dis ISDN disconnected tests.
|
|
isdn_con CMD isdn_con ISDN connected tests.
|
|
ldram CMD low_memtest [-p] DRAM (0-4MB) data/address, parity test
|
|
led CMD setled Set led color
|
|
memtest CMD memory_test CPU memory test
|
|
parity CMD parity_test memory parity checking mechanism
|
|
print1 CMD plp_write Parallel port write dma
|
|
print2 CMD plp_mwrite Parallel port multiple desc write dma
|
|
print3 CMD plp_lpbk Parallel port loopback test
|
|
resetcons CMD resetcons Reset graphics console
|
|
is_r4600sc CMD sc_present returns 1 if cpu is r4600sc
|
|
sc_on CMD enable_scache Turn on 2ndary cached, r4600sc CPU
|
|
sc_off CMD disable_scache Turn off 2ndary cache on r4600sc CPU
|
|
invline CMD invalidate_line_scache Invalidate 2ndy cache line, r4600sc CPU
|
|
wrblk CMD write_block do an icache block write, r4600sc CPU
|
|
rdblk CMD read_block do an icache block read, r4600sc CPU
|
|
sc_mem CMD sc_mem_test do a memory patten test, r4600sc CPU
|
|
sc_hit CMD sc_hit_test do cache reads, r4600sc CPU
|
|
sc_miss CMD sc_miss_test do mem reads (cache miss), r4600sc CPU
|
|
sc_hit_miss CMD sc_hit_n_miss set up & inv one line, test, try next line, r4600sc CPU
|
|
sc_tag CMD sc_tag_ram line by line test of tag ram hits, r4600sc CPU
|
|
scache1 CMD scache_ecc Secondary cache misc test
|
|
scache2 CMD scache Secondary cache address and data test
|
|
scsi CMD scsi SCSI
|
|
timer CMD timer timer frequency
|
|
tlb CMD tlbtest TLB
|
|
utlb CMD utlb_miss_exception UTLB miss exception
|
|
wait CMD wait Wait for <CR> to continue (usage: wait [\"message\"])
|
|
xscsi CMD exercise_scsi Exercise all SCSI disk drives found
|
|
nvram1 CMD eeprom_address eeprom address
|
|
nvram3 CMD eeprom_data eeprom data
|
|
nvram4 CMD eeprom_id eeprom id
|
|
nvram5 CMD eeprom_pins eeprom pin signals
|
|
eisa CMD eisa_register data path test for EIU/Intel regs.
|
|
chg_volt CMD chg_volt [0-2] Set +5V supply +/-5%
|
|
pwjumper CMD passwd_jumper Indicate if passwd jumper is installed
|
|
pargenlog CMD pargenlog_test Parity Generation Logic Test
|
|
blk CMD blk_test Block Read and Write Test
|
|
dram2 CMD dram2_diagnostics Modified dram_diagnostics
|
|
shift CMD shift_dram Shifting data patterns into successive addresses
|
|
khlow CMD khlow_drv Knaizuk Hartmann Low Memory Test
|
|
memtest2 CMD memtest2_test Addruniq=0,March=1,Mats=2,Kh=3,Altaccess=4,Khpar=5,Movi=6,Walkingbit=7
|
|
wd95a CMD regs_wd95a Western Digital wd95a registers test
|