948 lines
14 KiB
Plaintext
948 lines
14 KiB
Plaintext
# This is an ide startup file intended for use in the field by customers
|
|
# and Field Engineers.
|
|
|
|
if ($1 == "fe") {
|
|
report=4;
|
|
echo "Report level set to VERBOSE";
|
|
}
|
|
else {
|
|
report=0;
|
|
}
|
|
fi
|
|
|
|
# Initialize script variables
|
|
# NOTE: At the end of the startup script each variable that is still set
|
|
# to 2 will indicate some tests that haven't been run (like after
|
|
# an error).
|
|
$cpufailed=2;
|
|
$scsifailed=2;
|
|
$gr2failed=2;
|
|
|
|
$audiofailed=0;
|
|
|
|
# THE FOLLOWING IS THE STARTUP SCRIPT FOR THE CPU DIAGNOSTICS.
|
|
#
|
|
# IN ORDER FOR THE SCRIPT TO RUN PROPERLY, THE FOLLOWING MUST BE DONE:
|
|
# 1. CONNECT THE TRANSMIT AND RECEIVE PINS ON CHANNEL A AND B OF DUART 0,
|
|
# CHANNEL B OF DUART 1 (FOR CHANNEL B OF DUART 1, THE REQUEST_TO_SEND
|
|
# AND CLEAR_TO_SEND PINS MUST ALSO BE CONNECTED).
|
|
|
|
ip26{
|
|
$cpufailed=0;
|
|
# Interrupt mask registers data test.";
|
|
if (int2) {
|
|
if (!$report) {
|
|
emfail 3;
|
|
wait;
|
|
exit;
|
|
}
|
|
$cpufailed=1;
|
|
}
|
|
|
|
# Real time clock test. Verify the accuracy of the real time clock and the carry
|
|
# circuitry by using the timer within the ctl1 gate array.
|
|
if (clock) {
|
|
if (!$report) {
|
|
emfail 7;
|
|
wait;
|
|
exit;
|
|
}
|
|
$cpufailed=1;
|
|
}
|
|
|
|
# Interval timer test. Verify the accuracy of the interval timer by using the
|
|
# real time clock.
|
|
if (timer) {
|
|
if (!$report) {
|
|
emfail 7;
|
|
wait;
|
|
exit;
|
|
}
|
|
$cpufailed=1;
|
|
}
|
|
|
|
# fast iu test
|
|
if (fast_iu) {
|
|
if (!$report) {
|
|
emfail 1;
|
|
wait;
|
|
exit;
|
|
}
|
|
$cpufailed=1;
|
|
}
|
|
|
|
# basic EISA register test (report error on HPC emfail number).
|
|
if (eisa) {
|
|
if (!$report) {
|
|
emfail 10;
|
|
wait;
|
|
exit;
|
|
}
|
|
$cpufailed=1;
|
|
}
|
|
|
|
# DUART 1B/modem, internal loopback test. Execute the internal loopback
|
|
# diagnostics provided by the DUART chips.
|
|
$tmp = duart -i1;
|
|
if ($tmp) {
|
|
resetcons 1;
|
|
if (!$report) {
|
|
emfail 8;
|
|
wait;
|
|
exit;
|
|
}
|
|
$cpufailed=1;
|
|
}
|
|
|
|
# EEPROM pin signal test. Verify the pin signals provided for the EEPROM.
|
|
if (nvram5) {
|
|
if (!$report) {
|
|
emfail 9;
|
|
wait;
|
|
exit;
|
|
}
|
|
$cpufailed=1;
|
|
}
|
|
|
|
# HPC3 peripheral controller register data test.
|
|
if (hpc3) {
|
|
if (!$report) {
|
|
emfail 10;
|
|
wait;
|
|
exit;
|
|
}
|
|
$cpufailed=1;
|
|
}
|
|
|
|
# Test floating point unit
|
|
$fpufailed=0;
|
|
if (fpu) {
|
|
if (!$report) {
|
|
emfail 5;
|
|
wait;
|
|
exit;
|
|
}
|
|
$fpufailed=1;
|
|
}
|
|
|
|
# Test TCC FIFO
|
|
if (tccfifo) {
|
|
if (!$report) {
|
|
emfail 1;
|
|
wait;
|
|
exit;
|
|
}
|
|
$cpufailed=1;
|
|
}
|
|
|
|
# Test TCC Prefetch
|
|
if (tccpref) {
|
|
if (!$report) {
|
|
emfail 1;
|
|
wait;
|
|
exit;
|
|
}
|
|
$cpufailed=1;
|
|
}
|
|
|
|
# Test ECC
|
|
if (ecc) {
|
|
if (!$report) {
|
|
emfail 13;
|
|
wait;
|
|
exit;
|
|
}
|
|
$cpufailed=1;
|
|
}
|
|
|
|
# Test Dcache
|
|
$tmp = dcache;
|
|
if ($tmp) {
|
|
if (!$report) {
|
|
emfail 1;
|
|
wait;
|
|
exit;
|
|
}
|
|
$cpufailed=1;
|
|
}
|
|
|
|
# Test Secondary cache
|
|
if (scache) {
|
|
if (!$report) {
|
|
emfail 1;
|
|
wait;
|
|
exit;
|
|
}
|
|
$cpufailed=1;
|
|
}
|
|
|
|
# Test low local memory (0-16MB)
|
|
if (lkh_aa) {
|
|
if (!$report) {
|
|
emfail 13;
|
|
wait;
|
|
exit;
|
|
}
|
|
$cpufailed=1;
|
|
}
|
|
|
|
# Test rest of local memory
|
|
# Kh test
|
|
tmp = memtest2 3
|
|
if ($tmp) {
|
|
if (!$report) {
|
|
emfail 13;
|
|
wait;
|
|
exit;
|
|
}
|
|
$cpufailed=1;
|
|
}
|
|
|
|
# Address uniqueness test
|
|
tmp = memtest2 0
|
|
if ($tmp) {
|
|
if (!$report) {
|
|
emfail 13;
|
|
wait;
|
|
exit;
|
|
}
|
|
$cpufailed=1;
|
|
}
|
|
|
|
# Butterfly test
|
|
tmp = memtest2 11
|
|
if ($tmp) {
|
|
if (!$report) {
|
|
emfail 13;
|
|
wait;
|
|
exit;
|
|
}
|
|
$cpufailed=1;
|
|
}
|
|
|
|
# March Y test
|
|
tmp = memtest2 9
|
|
if ($tmp) {
|
|
if (!$report) {
|
|
emfail 13;
|
|
wait;
|
|
exit;
|
|
}
|
|
$cpufailed=1;
|
|
}
|
|
|
|
# Walking Bit Test
|
|
tmp = memtest2 7
|
|
if ($tmp) {
|
|
if (!$report) {
|
|
emfail 13;
|
|
wait;
|
|
exit;
|
|
}
|
|
$cpufailed=1;
|
|
}
|
|
|
|
if (audiofield) {
|
|
if (!$report) {
|
|
emfail 14;
|
|
wait;
|
|
exit;
|
|
}
|
|
$audiofailed=1;
|
|
}
|
|
|
|
# Test SCSI devices
|
|
$status1=scsi;
|
|
$status2=xscsi;
|
|
$scsi_status=$status1 | $status2;
|
|
$scsifailed = 0;
|
|
if ($scsi_status & 257) {
|
|
# SCSI chip 0 or 1 failure
|
|
if (!$report) {
|
|
emfail 15;
|
|
wait;
|
|
exit;
|
|
}
|
|
$cpufailed=1;
|
|
}
|
|
if ($scsi_status & 98175) {
|
|
# 0x10000 (cabling) or any scsi device failure (not 1 or 0x100, which
|
|
# means chip failure, since for now, chip is always ID 0)
|
|
# scsi() puts the failure in a global for emfail.
|
|
if (!$report) {
|
|
emfail 6;
|
|
wait;
|
|
exit;
|
|
}
|
|
$scsifailed=1;
|
|
}
|
|
|
|
# END OF IP26 SCRIPT
|
|
}
|
|
|
|
# Start of GR2 diagnostics
|
|
$mon=0
|
|
gr2_vhwinit {
|
|
#Assume that GR2 rev.2 is not used. So, can write 0x47 to bdvers.rd0
|
|
gr2_videoclk 0x47
|
|
if ($mon ==1 ) gr2_initclock 0x132;
|
|
else gr2_initclock 0x107;
|
|
fi
|
|
gr2_wrconfig 0x0
|
|
gr2_delay 3
|
|
gr2_wrconfig 0x1
|
|
gr2_vinitdac
|
|
}
|
|
gr2_initre {
|
|
$a = gr2_getGR2ver;
|
|
if ($a < 4) gr2_wrfifo 0 0;
|
|
else if ($a == 4) gr2_wrfifo 0 1;
|
|
else gr2_wrfifo 0 2;
|
|
}
|
|
gr2_initsys {
|
|
gr2_reset
|
|
gr2_vhwinit
|
|
$mon = gr2_getMonType;
|
|
if ($mon == 1) gr2_initvc1 4;
|
|
else gr2_initvc1 20;
|
|
fi
|
|
gr2_xcol
|
|
gr2_inithq
|
|
gr2_load_ucode ge
|
|
gr2_load_ucode hq
|
|
gr2_unstall
|
|
gr2_initre
|
|
}
|
|
|
|
clear {
|
|
gr2_wrfifo 35 0
|
|
gr2_wrfifo 6 0
|
|
}
|
|
gr2_quad {
|
|
gr2_wrfifo 33 0
|
|
}
|
|
gr2_fourquad {
|
|
gr2_wrfifo 34 0
|
|
}
|
|
|
|
$gr2_failed = 0;
|
|
|
|
test_xmap{
|
|
gr2_initsys;
|
|
$a=gr2_txmap;
|
|
return $a;
|
|
}
|
|
|
|
test_xmap_clut{
|
|
gr2_initsys;
|
|
$a=gr2_txmap_clut;
|
|
return $a;
|
|
}
|
|
|
|
gr2 {
|
|
$vc1_sram_failed=0;
|
|
$tram0_failed=0;
|
|
$tram1_failed=0;
|
|
$tram2_failed=0;
|
|
$tram3_failed=0;
|
|
$tram4_failed=0;
|
|
$tram5_failed=0;
|
|
$tram6_failed=0;
|
|
$tram7_failed=0;
|
|
$tram8_failed=0;
|
|
$tram9_failed=0;
|
|
$tram10_failed=0;
|
|
$hq2test_failed=0;
|
|
$shram_failed=0;
|
|
$ram12_failed=0;
|
|
$seedrom_failed=0;
|
|
$sqrom_failed=0;
|
|
$gebus_failed=0;
|
|
$gefloat_failed=0;
|
|
$chkbt457_failed=0;
|
|
$shramre3_failed=0;
|
|
$cpushram_failed=0;
|
|
$cpure3_failed=0;
|
|
$vdma_failed=0;
|
|
$ctxsw_failed=0;
|
|
$bp_failed=0;
|
|
$stride_failed=0 ;
|
|
$zb_failed=0;
|
|
$test_xmap_failed=0;
|
|
$test_xmap_clut_failed=0;
|
|
$quad_failed=0;
|
|
$fourquad_failed=0;
|
|
|
|
$gr2failed=0;
|
|
gr2_reset;
|
|
buffon
|
|
|
|
# HQ2 internal register 19 must read 0xdeadbeef
|
|
gr2_rdhqint 19;
|
|
|
|
# Test VC1 SRAM
|
|
gr2_vhwinit
|
|
if (gr2_vc1_sram) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$vc1_sram_failed = 1;
|
|
}
|
|
# Test ram 0 at Ge7 at 0
|
|
$tmp = gr2_tram 0;
|
|
if ($tmp) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$tram0_failed = 1;
|
|
}
|
|
# Test ram 0 at Ge7 at 1
|
|
$tmp = gr2_tram 1;
|
|
if ($tmp){
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$tram1_failed = $tmp;
|
|
}
|
|
# Test ram 0 at Ge7 at 2
|
|
$tmp = gr2_tram 2;
|
|
if ($tmp){
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$tram2_failed = 1;
|
|
}
|
|
# Test ram 0 at Ge7 at 3
|
|
$tmp = gr2_tram 3 ;
|
|
if ($tmp) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$tram3_failed = 1;
|
|
}
|
|
# Test ram 0 at Ge7 at 4
|
|
$tmp = gr2_tram 4 ;
|
|
if ($tmp) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$tram4_failed = 1;
|
|
}
|
|
# Test ram 0 at Ge7 at 5
|
|
$tmp = gr2_tram 5 ;
|
|
if ($tmp) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$tram5_failed = 1;
|
|
}
|
|
# Test ram 0 at Ge7 at 6
|
|
$tmp = gr2_tram 6 ;
|
|
if ($tmp) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$tram6_failed = 1;
|
|
}
|
|
# Test ram 0 at Ge7 at 7
|
|
$tmp = gr2_tram 7 ;
|
|
if ($tmp) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$tram7_failed = 1;
|
|
}
|
|
# Test shram
|
|
$tmp = gr2_tram 8 ;
|
|
if ($tmp) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$tram8_failed = 1;
|
|
}
|
|
# Test Hq2uram
|
|
$tmp = gr2_tram 9 ;
|
|
if ($tmp) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$tram9_failed = $tmp;
|
|
}
|
|
# Test ge7uram
|
|
$tmp = gr2_tram 10;
|
|
if ($tmp) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$tram10_failed = $tmp;
|
|
}
|
|
gr2_initsys;
|
|
clear;
|
|
|
|
# Test HQ2
|
|
if (gr2_hq2test) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$hq2test_failed = 1;
|
|
}
|
|
# Test shareram using Ucode
|
|
if (gr2_shram) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$shram_failed = 1;
|
|
}
|
|
# Test internal GE7 ram
|
|
if (gr2_ram12) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$ram12_failed =1;
|
|
}
|
|
# Test seedrom
|
|
if (gr2_seedrom) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$seedrom_failed =1;
|
|
}
|
|
# Test the squaroot rom
|
|
if (gr2_sqrom) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$sqrom_failed =1;
|
|
}
|
|
|
|
# needed again ???
|
|
|
|
gr2_initsys ;
|
|
|
|
# Test Ge 7 bus
|
|
if (gr2_gebus) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$gebus_failed =1;
|
|
}
|
|
|
|
# Test ge floating point unit
|
|
if (gr2_gefloat) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$gefloat_failed = 1;
|
|
}
|
|
gr2_initsys;
|
|
clear;
|
|
resetcons
|
|
buffoff
|
|
$err = 0;
|
|
if ($vc1_sram_failed)
|
|
{
|
|
echo "VC1 SRAM test failed";
|
|
$err = 1
|
|
}
|
|
if ($tram0_failed)
|
|
{
|
|
echo "Ram 0 at GE7 - 0 failed ";
|
|
$err = 1
|
|
}
|
|
if ($tram1_failed)
|
|
{
|
|
echo "Ram 0 at GE7 - 1 failed ";
|
|
$err = 1
|
|
}
|
|
if ($tram2_failed)
|
|
{
|
|
echo "Ram 0 at GE7 - 2 failed ";
|
|
$err = 1
|
|
}
|
|
if ($tram3_failed)
|
|
{
|
|
echo "Ram 0 at GE7 - 3 failed ";
|
|
$err = 1
|
|
}
|
|
if ($tram4_failed)
|
|
{
|
|
echo "Ram 0 at GE7 - 4 failed ";
|
|
$err = 1
|
|
}
|
|
if ($tram5_failed)
|
|
{
|
|
echo "Ram 0 at GE7 - 5 failed ";
|
|
$err = 1
|
|
}
|
|
if ($tram6_failed)
|
|
{
|
|
echo "Ram 0 at GE7 - 6 failed ";
|
|
$err = 1
|
|
}
|
|
if ($tram7_failed)
|
|
{
|
|
echo "Ram 0 at GE7 - 7 failed ";
|
|
$err = 1
|
|
}
|
|
if ($tram8_failed)
|
|
{
|
|
echo "Share ram test failed ";
|
|
$err = 1
|
|
}
|
|
if ($tram9_failed)
|
|
{
|
|
echo "Hq2uram ram failed ";
|
|
$err = 1
|
|
}
|
|
if ($tram10_failed)
|
|
{
|
|
echo "ge7uram failed " ;
|
|
$err = 1
|
|
}
|
|
if ($hq2test_failed)
|
|
{
|
|
echo "HQ2 Test failed ";
|
|
$err = 1
|
|
}
|
|
if ($shram_failed)
|
|
{
|
|
echo "shram test failed";
|
|
$err = 1
|
|
}
|
|
if ($ram12_failed)
|
|
{
|
|
echo "GE7 ram 1/2 test failed ";
|
|
$err = 1
|
|
}
|
|
if ($seedrom_failed)
|
|
{
|
|
echo "seedrom test failed ";
|
|
$err = 1
|
|
}
|
|
if ($sqrom_failed)
|
|
{
|
|
echo "squaroot teste failed";
|
|
$err = 1
|
|
}
|
|
if ($gebus_failed)
|
|
{
|
|
echo "gebus test failed";
|
|
$err = 1
|
|
}
|
|
if ($gefloat_failed)
|
|
{
|
|
echo "gefloat test failed";
|
|
$err = 1
|
|
}
|
|
|
|
if ( $err )
|
|
{
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
echo "HQ & GE Tests failed\n";
|
|
wait
|
|
$err=0
|
|
$gr2_failed=1
|
|
}
|
|
else echo "HQ & GE Tests passed\n"
|
|
buffon
|
|
|
|
# Test bt457
|
|
if (gr2_chkbt457) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$chkbt457_failed = 1;
|
|
$err=1;
|
|
}
|
|
# Test Shared ram and Re
|
|
gr2_initsys
|
|
$tmp = gr2_shramre3
|
|
if ($tmp) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$shramre3_failed =1;
|
|
$err=1;
|
|
}
|
|
# Test DMA between host and GE7 shared ram
|
|
|
|
gr2_initsys
|
|
clear
|
|
$tmp = gr2_cpushram
|
|
if ($tmp) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$cpushram_failed =1;
|
|
$err=1;
|
|
}
|
|
|
|
# Test DMA between host and and RE3
|
|
resetcons
|
|
buffon
|
|
gr2_initsys
|
|
$tmp = gr2_cpure3
|
|
if ($tmp) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$cpure3_failed =1;
|
|
$err=1;
|
|
}
|
|
|
|
# Test stride DMA between shram and re3
|
|
if(gr2_ctxsw) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$ctxsw_failed =1;
|
|
$err=1;
|
|
}
|
|
clear;
|
|
|
|
# Test quad drawing
|
|
$tmp = gr2_quad
|
|
if ($tmp) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$quad_failed =1;
|
|
$err=1;
|
|
}
|
|
$tmp = gr2_fourquad
|
|
if ($tmp){
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$fourquad_failed = 1;
|
|
$err=1;
|
|
}
|
|
clear;
|
|
|
|
resetcons
|
|
buffoff
|
|
if ($chkbt457_failed) echo "Bt457 test failed";
|
|
if ($shramre3_failed) echo "shramre3 test failed"
|
|
if ($cpushram_failed) echo "CPU shram test failed";
|
|
if ($cpure3_failed) echo "cpure3 test failed ";
|
|
if ($ctxsw_failed) echo "context switching test failed ";
|
|
if ($quad_failed) echo "quad test failed";
|
|
if ($fourquad_failed) echo "fourquad test failed";
|
|
|
|
if ($err) {
|
|
echo "****** PRESS RETURN TO CONTINUE OR ^C TO EXIT *********"
|
|
wait
|
|
$err=0
|
|
$gr2failed=1
|
|
}
|
|
else echo "BT457, DMA and QUADs Tests Passed.\n"
|
|
buffon
|
|
|
|
# Test bitplane VM2
|
|
gr2_initsys
|
|
if (gr2_bp) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$bp_failed = 1;
|
|
$err=1;
|
|
}
|
|
# Test stridedma between shram and re3
|
|
resetcons
|
|
buffon
|
|
gr2_initsys
|
|
$tmp = gr2_stride
|
|
if ($tmp) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$stride_failed =1 ;
|
|
$err=1;
|
|
}
|
|
# Test Zbuffer
|
|
gr2_initsys
|
|
$tmp=gr2_zb
|
|
if($tmp) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$zb_failed =1;
|
|
$err=1;
|
|
}
|
|
# Test Xmap
|
|
if (test_xmap) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$test_xmap_failed =1;
|
|
$err=1;
|
|
}
|
|
|
|
# Test Xmap CLUT
|
|
if (test_xmap_clut) {
|
|
if (!$report) {
|
|
emfail 2;
|
|
wait;
|
|
exit;
|
|
}
|
|
$test_xmap_clut_failed =1;
|
|
$err=1;
|
|
}
|
|
|
|
resetcons
|
|
buffoff
|
|
echo "************************* RESULTS ******************************"
|
|
if ($bp_failed) {
|
|
echo "bitplane test failed";
|
|
$gr2failed = 1;
|
|
}
|
|
if ($stride_failed) {
|
|
echo "stride test failed";
|
|
$gr2failed = 1;
|
|
}
|
|
if ($zb_failed) {
|
|
echo "Zbuffer test failed";
|
|
$gr2failed = 1;
|
|
}
|
|
if ($test_xmap_failed) {
|
|
echo "test_xmap test failed";
|
|
$gr2failed = 1;
|
|
}
|
|
if ($test_xmap_clut_failed) {
|
|
echo "test_xmap_clut test failed";
|
|
$gr2failed = 1;
|
|
}
|
|
if (!$err) echo "Frame Buffer, Bit-Plane, and XMAPs Test Passed.\n"
|
|
clear
|
|
resetcons
|
|
buffoff
|
|
if ($gr2failed) echo "ERROR: Failure detected on graphics board."
|
|
else echo "graphics board tests passed"
|
|
fi
|
|
echo " *****************END OF THE TEST *****************"
|
|
}
|
|
|
|
gr2_all {
|
|
$gfxslot = gr2_setboard 0;
|
|
if ($gfxslot) {
|
|
buffoff
|
|
echo "Testing gfx in slot 0.\n"
|
|
gr2;
|
|
if ($gr2_failed) {
|
|
echo "ERROR: Failure detected on gfx in slot 0."
|
|
}
|
|
}
|
|
$gfxslot = gr2_setboard 1;
|
|
if ($gfxslot) {
|
|
buffoff
|
|
echo "Testing gfx in slot 1.\n"
|
|
gr2;
|
|
if ($gr2_failed) {
|
|
echo "ERROR: Failure detected on gfx in slot 1."
|
|
}
|
|
}
|
|
}
|
|
# END OF GR2 SUPPORT
|
|
|
|
|
|
# Here lies what is actually executed at start-up
|
|
hinv;
|
|
echo "";
|
|
|
|
ip26;
|
|
|
|
$express = gr2_probe;
|
|
|
|
if ($express) {
|
|
gr2_all;
|
|
}
|
|
|
|
echo "TEST RESULTS:";
|
|
if ($cpufailed == 1) echo "Failure detected on CPU board.";
|
|
if ($cpufailed == 2) echo "CPU tests NOT completed.";
|
|
if (!$cpufailed) echo "CPU tests completed.";
|
|
|
|
if ($fpufailed == 1) echo "Failure detected on FPU.";
|
|
if ($fpufailed == 2) echo "FPU tests NOT completed.";
|
|
if (!$fpufailed) echo "FPU tests completed.";
|
|
|
|
if ($audiofailed == 1) echo "Failure detected on audio.";
|
|
if ($audiofailed == 0) echo "Audio tests completed.";
|
|
|
|
if ($scsifailed == 1) echo "Failure detected on SCSI device[s].";
|
|
if ($scsifailed == 2) echo "SCSI tests NOT completed.";
|
|
if (!$scsifailed) echo "SCSI tests completed.";
|
|
|
|
if ($express) {
|
|
if ($gr2failed == 1) echo "Failure detected on GR2 graphics board.";
|
|
if ($gr2failed == 2) echo "GR2 graphics board tests NOT completed.";
|
|
if (!$gr2failed) echo "GR2 graphics board tests completed.";
|
|
}
|
|
|
|
wait "Diagnostics completed";
|
|
|