17 lines
739 B
Plaintext
17 lines
739 B
Plaintext
SETUP
|
|
Connect serial port 1 to switch box and 2 to the Prism. Ensure that you have the following
|
|
software rad_diag, radical, switcher, swPrism. Make sure the switch box is working by
|
|
selecting different switche buttons. If neccessary power cycle the switch box.
|
|
|
|
Insert cards and reboot machine. Select the directory the software resides and type:
|
|
./radical -s #must power cycle Prism each time before running -s option
|
|
This sets up the switch box and prism. Check that the prism's display
|
|
says "3.1 Run" on the lower (second) line, and the switch box #1 button light is on.
|
|
|
|
Do not operate PRISM manually.
|
|
|
|
RUN TEST
|
|
To run the test type:
|
|
./radical
|
|
The script will run all tests on both cards. No further user intervention is neccessary.
|