arti/irix-657m-src
1
0
Fork 0
Code Activity
Files
8fc8fa80899c66937979cd5b807766a40b74cd13
irix-657m-src/eoe/man/man4/proc.4
calmsacibis995 8fc8fa8089 Source code upload
2022-09-29 17:59:04 +03:00

1620 lines
58 KiB
Groff
Raw Blame History

.\" Copyright 1989 AT&T
.nr X
.if \nX=0 .ds x} proc 4 "" "\&"
.TH proc 4
.SH NAME
proc \- process (debug) filesystem
.SH SYNOPSIS
.nf
\f3#include <sys/procfs.h>\f1
.fi
.SH DESCRIPTION
\f2/proc\fP is a filesystem that provides access
to the image of each active process in the system.
This was historically mounted as \f2/debug\fP.
\f2/proc\fP does not consume any disk resources.
This interface provides a richer set of functionality and replaces
the now obsolete \f2dbg\f1(4), \f2debug\f1(4) interface.
The "files" of this filesystem are of the form \f2/proc/nnnnn\f1 and
\f2/proc/pinfo/nnnnn\f1,
where \f2nnnnn\f1 is a decimal number corresponding to the process-ID.
These files actually consume no disk space, and are only convenient handles
by which a debugger can attach to a process.
The owner of each ``file'' is determined by the process's user-ID.
Files of the form \f2/proc/nnnnn\f1 have permission mode 0600 while
files of the form \f2/proc/pinfo/nnnnn\f1 have permission mode 0444.
The \f2/proc/pinfo\f1 files are intended for use by unprivileged
programs that wish to access miscellaneous process information
such as that provided by \f2ps\fP(1) and \f2top\fP(1).
.P
The
.IR statfs (2)
system call will return valid information concerning
the \f3proc\f1 filesystem.
The total and free blocks as reported by
.IR df (1)
respectively represent the total virtual memory (real memory plus swap space)
available and currently free.
.PP
Standard system call interfaces are used to access \f2/proc\fP files:
\f2open\fP(2), \f2close\fP(2), \f2read\fP(2), \f2write\fP(2),
and \f2ioctl\fP(2).
Note that \f2read\fP(2) and \f2write\fP(2) are not allowed
for \f2/proc/pinfo\f1 files.
Furthermore only the \f3PIOCACINFO\fP, \f3PIOCPSINFO\fP,
\f3PIOCUSAGE\fP, \f3PIOCGETPTIMER\fP and \f3PIOCCRED\fP commands may be
specified to \f2ioctl\fP(2) for \f2/proc/pinfo\f1 files.
An open for reading and writing enables process control;
a read-only open allows inspection but not control.
As with ordinary files, more than one process can open
the same \f2/proc\fP file at the same time.
\f2Exclusive open\fP is provided to allow controlling
processes to avoid collisions:
an \f2open\fP(2) for writing that specifies O_EXCL
fails if the file is already open for writing;
if such an exclusive open succeeds, subsequent attempts to open
the file for writing, with or without the O_EXCL flag,
fail until the exclusively-opened file descriptor is closed.
(Exception: a superuser \f2open\fP(2) that does not specify
O_EXCL succeeds even if the file is exclusively opened.)
There can be any number of read-only opens, even when an
exclusive write open is in effect on the file.
On a successful open the inherit-on-fork (PR_FORK) and
run-on-last-close (PR_RLC) flags are set by default, if no other process
has the file open.
On the last close for writing, if the kill-on-last-close (PR_KLC)
or the PR_RLC flags are set, then all the controlling flags are
cleared and either a SIGKILL is sent to the process or the
process is set running again.
If neither of the above two flags are set,
the controlling flags are not cleared.
.PP
Data may be transferred from or to any locations in the
traced process's address space by applying \f2lseek\fP(2)
to position the file at the virtual address of interest
followed by \f2read\fP(2) or \f2write\fP(2).
The PIOCMAP operation can be applied to determine
the accessible areas (mappings) of the address space.
A contiguous area of the address space may appear as
multiple mappings due to varying read/write/execute permissions.
I/O transfers may span contiguous mappings.
An I/O request extending into an unmapped area
is truncated at the boundary.
.PP
Information and control operations are provided through \f2ioctl\fP(2).
These have the form:
.Ex
#include <sys/types.h>
#include <sys/signal.h>
#include <sys/fault.h>
#include <sys/syscall.h>
#include <sys/procfs.h>
void *p;
retval = ioctl(fildes, code, p);
.Ee
The argument \f2p\fP is a generic pointer whose type depends
on the specific \f2ioctl\fP code.
Where not specifically mentioned below, its value should be zero.
\f2<sys/procfs.h>\fP contains definitions of \f2ioctl\fP codes
and data structures used by the operations.
.PP
Process information and control operations
involve the use of sets of flags.
The set types \f3sigset_t\fP, \f3fltset_t\fP, and \f3sysset_t\fP
correspond, respectively, to signal, fault, and system call
enumerations defined in
\f2<sys/signal.h>\fP, \f2<sys/fault.h>\fP, and \f2<sys/syscall.h>\fP.
Each set type is large enough to hold flags for its own enumeration.
Although they are of different sizes, they have a common structure
and can be manipulated by these macros:
.PP
.Ex
prfillset(&set); /* turn on all flags in set */
premptyset(&set); /* turn off all flags in set */
praddset(&set, flag); /* turn on the specified flag */
prdelset(&set, flag); /* turn off the specified flag */
r = prismember(&set, flag); /* != 0 iff flag is turned on */
.Ee
.PP
One of \f3prfillset\fP() or \f3emptyset\fP() must be used to initialize
\f3set\fP before it is used in any other operation.
\f3flag\fP must be a member of the enumeration corresponding to \f3set\fP.
.SH "IOCTL CODES"
The allowable \f2ioctl\fP codes follow.
Certain of these can be used only if the process
file descriptor is open for writing;
these include all operations that affect process control.
Those requiring write access are marked with an asterisk (*).
Except where noted, an \f2ioctl\fP to a process
that has terminated elicits the error ENOENT.
.SS PIOCSTATUS
PIOCSTATUS returns status information for the process;
\f2p\fP is a pointer to a \f3prstatus\fP structure
containing at least the following fields:
.Ex
typedef struct prstatus {
long pr_flags; /* Flags */
short pr_why; /* Reason for stop (if stopped) */
short pr_what; /* More detailed reason */
short pr_cursig; /* Current signal */
sigset_t pr_sigpend; /* Set of pending signals */
sigset_t pr_sighold; /* Set of held signals */
struct siginfo pr_info; /* Info associated with signal/fault */
struct sigaltstack pr_altstack; /* Alternate signal stack info */
struct sigaction pr_action;/* Signal action for current signal */
short pr_syscall; /* System call # (if in syscall) */
short pr_nsysarg; /* # of arguments to this syscall */
long pr_errno; /* Error number from system call */
long pr_rval1; /* System call return value 1 */
long pr_rval2; /* System call return value 2 */
long pr_sysarg[PRSYSARGS]; /* Arguments to this syscall */
pid_t pr_pid; /* Process id */
pid_t pr_ppid; /* Parent process id */
pid_t pr_pgrp; /* Process group id */
pid_t pr_sid; /* Session id */
timespec_t pr_utime; /* Process user cpu time */
timespec_t pr_stime; /* Process system cpu time */
timespec_t pr_cutime; /* Sum of children's user times */
timespec_t pr_cstime; /* Sum of children's system times */
char pr_clname[8]; /* Scheduling class name */
long pr_instr; /* Current instruction */
gregset_t pr_reg; /* General registers */
} prstatus_t;
.Ee
\f3pr_flags\fP is a bit-mask holding these flags:
.PP
.RS
.TP 16
\f3PR_STOPPED\fP
Process is stopped
.TP
\f3PR_ISTOP\fP
Process is stopped on an event of interest (see PIOCSTOP).
.TP
\f3PR_DSTOP\fP
Process has a stop directive in effect (see PIOCSTOP).
.TP
\f3PR_STEP\fP
Process has a single-step directive in effect (see PIOCRUN).
.TP
\f3PR_ASLEEP\fP
Process is in an interruptible sleep within a system call.
.TP
\f3PR_PCINVAL\fP
Process's current instruction (\f3pr_instr\fP) is undefined.
.TP
\f3PR_ISSYS\fP
Process is a system process (see PIOCSTOP).
.TP
\f3PR_FORK\fP
Process has its inherit-on-fork flag set (see PIOCSET).
.TP
\f3PR_RLC\fP
Process has its run-on-last-close flag set (see PIOCSET).
.TP
\f3PR_KLC\fP
Process has its kill-on-last-close flag set (see PIOCSET).
.TP
\f3PR_PTRACE\fP
Process is being traced via \f2ptrace\fP(2).
.RE
.PP
\f3pr_why\fP and \f3pr_what\fP together describe,
for a stopped process, the reason that the process is stopped.
Possible values of \f3pr_why\fP are:
.PP
.RS
.TP 16
\f3PR_REQUESTED\fP
The stop occurred
in response to a stop directive, normally because
PIOCSTOP was applied.
\f3pr_what\fP is unused in this case.
.TP
\f3PR_SIGNALLED\fP
The process stopped
on receipt of a signal (see PIOCSTRACE);
\f3pr_what\fP holds the signal number that caused the stop
(for a newly-stopped process, the same value is in \f3pr_cursig\fP).
.TP
\f3PR_FAULTED\fP
The process stopped on
incurring a hardware fault (see PIOCSFAULT);
\f3pr_what\fP holds the fault number that caused the stop.
.TP
\f3PR_SYSENTRY\fP and \f3PR_SYSEXIT\fP
A stop on entry
to or exit from a system call (see PIOCSENTRY and PIOCSEXIT);
\f3pr_what\fP holds the system call number.
.TP
\f3PR_JOBCONTROL\fP
The process stopped due to
the default action of a job control stop signal (see \f2sigaction\fP(2));
\f3pr_what\fP holds the stopping signal number.
.RE
.PP
\f3pr_cursig\fP names the current signal, that is,
the next signal to be delivered to the process.
\f3pr_sigpend\fP identifies any other signals pending for the process.
\f3pr_sighold\fP identifies those signals
whose delivery is being delayed if sent to the process.
.PP
\f3pr_info\fP,
when the process is in a PR_SIGNALLED or PR_FAULTED stop,
contains additional information pertinent to the particular signal or fault
(see \f2<sys/siginfo.h>\fP).
.PP
\f3pr_altstack\fP contains the alternate signal stack information
for the process (see \f2sigaltstack\fP(2)).
\f3pr_action\fP contains the signal action information pertaining
to the current signal (see \f2sigaction\fP(2));
it is undefined if \f3pr_cursig\fP is zero.
.PP
\f3pr_syscall\fP is the number of the system call,
if any, being executed by the traced process;
it is non-zero if the process is stopped
on PR_SYSENTRY or PR_SYSEXIT,
is asleep within a system call (PR_ASLEEP is set),
or is stopped on a watchpoint trap incurred within a system call
(see PIOCSWATCH).
If \f3pr_syscall\fP is non-zero,
\f3pr_nsysarg\fP is the number of arguments to the system call
and the \f3pr_sysarg\fP array contains the actual arguments;
\f3pr_errno\fP contains the value of \f3errno\fP returned at the last
system call; and
\f3pr_rval1\fP and \f3pr_rval2\fP contain the return values from
the last system call.
.PP
\f3pr_pid\fP, \f3pr_ppid\fP, \f3pr_pgrp\fP, and \f3pr_sid\fP are,
respectively, the process id, the id of the process's parent,
the process's process group id,
and the process's session id.
.PP
\f3pr_utime\fP, \f3pr_stime\fP,
\f3pr_cutime\fP, and \f3pr_cstime\fP are, respectively,
the user CPU and system CPU time consumed by the process,
and the cumulative user CPU and system CPU
time consumed by the process's children,
in seconds and nanoseconds.
.PP
\f3pr_clname\fP contains the name of the process's scheduling class.
.PP
\f3pr_instr\fP contains the machine
instruction to which the program counter refers.
The amount of data retrieved from the process is machine-dependent;
on SGI machines, it is a 32-bit word.
In general, the size is that of the machine's smallest instruction.
If PR_PCINVAL is set, \f3pr_instr\fP is undefined;
this occurs whenever the process is not stopped or when
the program counter refers to an invalid address.
.PP
\f3pr_reg\fP is an array holding the contents of the general registers
for a stopped process.
For SGI machines the structure \f3gregset_t\fP is
defined in \f2<sys/ucontext.h>\fP.
If the process is not stopped, register values are undefined.
.SS *PIOCSTOP PIOCWSTOP
PIOCSTOP directs the process to stop and waits until it has stopped;
PIOCWSTOP simply waits for the process to stop.
These operations complete when the process stops on an event of interest,
immediately if already so stopped.
If \f2p\fP is non-zero it points to an instance of \f3prstatus_t\fP
to be filled with status information for the stopped process.
.PP
An ``event of interest'' is either a PR_REQUESTED stop
or a stop that has been specified in the process's tracing flags
(set by PIOCSTRACE, PIOCSFAULT,
PIOCSENTRY, and PIOCSEXIT).
A PR_JOBCONTROL stop is specifically not an event of interest.
(A process may stop twice due to a stop signal, first showing
PR_SIGNALLED if the signal is traced and again showing
PR_JOBCONTROL if the process is set running without
clearing the signal.)
If the process is controlled by \f2ptrace\fP(2),
it comes to a PR_SIGNALLED stop on receipt of any signal;
this is an event of interest only if
the signal is in the traced signal set.
If PIOCSTOP is applied to a process that is stopped,
but not on an event of interest, the stop directive takes
effect when the process is restarted by the competing mechanism;
at that time the process enters a PR_REQUESTED
stop before executing any user-level code.
.PP
\f2ioctl\fP()s are interruptible by signals so that, for example,
an \f2alarm\fP(2) can be set to avoid waiting forever for a process
that may never stop on an event of interest.
If PIOCSTOP is interrupted, the stop directive remains
in effect even though the \f2ioctl\fP() returns an error.
.PP
A system process (indicated by the PR_ISSYS flag)
never executes at user level,
has no user-level address space visible through \f2/proc\fP,
and cannot be stopped.
Applying PIOCSTOP or PIOCWSTOP to a system process
elicits the error EBUSY.
.SS *PIOCRUN
The traced process is made runnable again after a stop.
If \f2p\fP is non-zero it points to a \f3prrun\fP structure
describing additional actions to be performed.
The \f3prrun\fP structure contains at least the following fields:
.Ex
typedef struct prrun {
long pr_flags; /* Flags */
sigset_t pr_trace; /* Set of signals to be traced */
sigset_t pr_sighold; /* Set of signals to be held */
fltset_t pr_fault; /* Set of faults to be traced */
caddr_t pr_vaddr; /* Virtual address at which to resume */
} prrun_t;
.Ee
\f3pr_flags\fP is a bit-mask describing optional actions;
the remainder of the entries are meaningful only if the
appropriate bits are set in \f3pr_flags\fP.
Flag definitions:
.PP
.RS
.TP 16
\f3PRCSIG\fP
Clears the current signal, if any
(see PIOCSSIG).
.TP
\f3PRCFAULT\fP
Clears the current fault, if any
(see PIOCCFAULT).
.TP
\f3PRSTRACE\fP
Sets the traced signal set to \f3pr_trace\fP
(see PIOCSTRACE).
.TP
\f3PRSHOLD\fP
Sets the held signal set to \f3pr_sighold\fP
(see PIOCSHOLD).
.TP
\f3PRSFAULT\fP
Sets the traced fault set to \f3pr_fault\fP
(see PIOCSFAULT).
.TP
\f3PRSVADDR\fP
Sets the address at which execution resumes
to \f3pr_vaddr\fP.
.TP
\f3PRSTEP\fP
Directs the process to single-step, that is,
to run and to execute a single machine instruction.
On completion of the instruction, a trace trap occurs.
If FLTTRACE is being traced, the process stops,
otherwise it is sent SIGTRAP;
if SIGTRAP is being traced and not held, the process stops.
This operation requires hardware and operating system support
and may not be implemented on all processors.
It is implemented on SGI machines.
.TP
\f3PRCSTEP\fP
Cancels any outstanding single-step directive
and any \f3PRSTEP\fP directive set in the current request.
.TP
\f3PRSABORT\fP
Meaningful only if the process is in a PR_SYSENTRY stop
or is marked PR_ASLEEP;
it instructs the process to abort execution of the system call
(see PIOCSENTRY, PIOCSEXIT).
.TP
\f3PRSTOP\fP
Directs the process to stop again as soon
as possible after resuming execution (see PIOCSTOP).
In particular if the process is stopped on
PR_SIGNALLED or PR_FAULTED, the next stop will
show PR_REQUESTED, no other stop will have intervened,
and the process will not have executed any user-level code.
.PP
PIOCRUN fails (EBUSY) if applied to a process
that is not stopped on an event of interest.
Once PIOCRUN has been applied, the process is no longer
stopped on an event of interest even if, due to a competing
mechanism, it remains stopped.
.SS *PIOCSTRACE
This defines a set of signals to be traced:
the receipt of one of these signals causes the traced process to stop.
The set of signals is defined via an instance
of \f3sigset_t\fP addressed by \f2p\fP.
Receipt of SIGKILL cannot be traced.
.PP
If a signal that is included in the held signal set is sent to
the traced process, the signal is not received and does not cause a
process stop until it is removed from the held signal set, either
by the process itself or by setting the held signal set with
PIOCSHOLD or the PRSHOLD option of PIOCRUN.
.SS PIOCGTRACE
The current traced signal set is returned in an instance
of \f3sigset_t\fP addressed by \f2p\fP.
.SS *PIOCSSIG
The current signal and its associated signal information are
set according to the contents of the \f3siginfo\fP structure
addressed by \f2p\fP (see \f2<sys/siginfo.h>\fP).
If the specified signal number is zero or if \f2p\fP is zero,
the current signal is cleared.
Setting the current signal to SIGKILL terminates
the process immediately, even if it is stopped. All other signals
will be sent after the process is made runnable, if it is currently
stopped.
.SS *PIOCKILL
A signal is sent to the process with semantics identical to those of
\f2kill\fP(2).
\f2p\fP points to an \f2int\fP naming the signal.
Sending SIGKILL terminates the process immediately.
.SS *PIOCUNKILL
A signal is deleted, that is, it is removed from the set of pending signals.
The current signal (if any) is unaffected.
\f2p\fP points to an \f2int\fP naming the signal.
It is an error to attempt to delete SIGKILL.
.SS PIOCGHOLD *PIOCSHOLD
PIOCGHOLD returns the set of held signals
(signals whose delivery will be delayed if sent to the process)
in an instance of \f3sigset_t\fP addressed by \f2p\fP.
PIOCSHOLD correspondingly sets the held signal set but does
not allow SIGKILL or SIGSTOP to be held.
.SS PIOCMAXSIG PIOCACTION
These operations provide information about the signal actions
associated with the traced process (see \f2sigaction\fP(2)).
PIOCMAXSIG returns, in the \f2int\fP addressed by \f2p\fP,
the maximum signal number understood by the system.
This can be used to allocate storage for use with the
PIOCACTION operation,
which returns the traced process's signal actions in an
array of \f3sigaction\fP structures addressed by \f2p\fP.
Signal numbers are displaced by 1 from array indices,
so that the action for signal number \f2n\fP appears
in position \f2n\fP\-1 of the array.
.SS *PIOCSFAULT
This defines a set of hardware faults to be traced:
on incurring one of these faults the traced process stops.
The set is defined via an instance
of \f3fltset_t\fP addressed by \f2p\fP.
Fault names are defined in \f2<sys/fault.h>\fP
and include the following.
Some of these may not occur on all processors;
there may be processor-specific faults in addition to these.
.RS
.TP 16
.PD 0
\f3FLTILL\fP
illegal instruction
.TP
\f3FLTPRIV\fP
privileged instruction
.TP
\f3FLTBPT\fP
breakpoint trap
.TP
\f3FLTTRACE\fP
trace trap
.TP
\f3FLTWATCH\fP
watchpoint trap
.TP
\f3FLTKWATCH\fP
kernel watchpoint trap
.TP
\f3FLTACCESS\fP
memory access fault
.TP
\f3FLTBOUNDS\fP
memory bounds violation
.TP
\f3FLTIOVF\fP
integer overflow
.TP
\f3FLTIZDIV\fP
integer zero divide
.TP
\f3FLTFPE\fP
floating-point exception
.TP
\f3FLTSTACK\fP
unrecoverable stack fault
.TP
\f3FLTPAGE\fP
recoverable page fault
.PD
.RE
.PP
When not traced, a fault normally results in the posting of
a signal to the process that incurred the fault.
If the process stops on a fault, the signal is posted
to the process when execution is resumed unless the fault is cleared
by PIOCCFAULT or by the PRCFAULT option of PIOCRUN.
FLTPAGE and FLTKWATCH\fP are exceptions; no signal is posted.
There may be additional processor-specific faults like this.
\f3pr_info\fP in the \f3prstatus\fP structure identifies the
signal to be sent and contains machine-specific
information about the fault.
.SS PIOCGFAULT
The current traced fault set is returned in an instance
of \f3fltset_t\fP addressed by \f2p\fP.
.SS *PIOCCFAULT
The current fault (if any) is cleared;
the associated signal is not sent to the process.
.SS *PIOCSENTRY *PIOCSEXIT
These operations instruct the process to stop on
entry to or exit from specified system calls.
The set of system calls to be traced is defined via an instance
of \f3sysset_t\fP addressed by \f2p\fP.
.PP
When entry to a system call is being traced, the traced process
stops after having begun the call to the system but before the system
call arguments have been fetched from the process.
When exit from a system call is being traced, the traced process
stops on completion of the system call just prior to checking for
signals and returning to user level.
At this point all return values have been stored
into the traced process's registers.
.PP
If the traced process is stopped on entry to a system call
(PR_SYSENTRY)
or when sleeping in an interruptible system call
(PR_ASLEEP is set),
it may be instructed to go directly to system call exit
by specifying the PRSABORT flag in a
PIOCRUN request.
Unless exit from the system call is being traced the
process returns to user level showing error EINTR.
.SS PIOCGENTRY PIOCGEXIT
These return the current traced system call entry or exit set in an
instance of \f3sysset_t\fP addressed by \f2p\fP.
.SS PIOCNWATCH
PIOCNWATCH returns, in the \f2int\fP addressed by \f2p\fP,
the number of watched areas supported by the system.
This can be used to allocate storage for use with the
PIOCSWATCH and PIOCGWATCH operations,
each of which must provide an array whose number of elements
equals the supported number of watched areas.
.SS *PIOCSWATCH
PIOCSWATCH establishes or clears a set of watched areas
in the traced process;
\f2p\fP points to \f3prwatch\fP structure containing
at least the following fields:
.Ex
typedef struct prwatch {
caddr_t pr_vaddr; /* Virtual address of watched area */
u_long pr_size; /* Size of watched area in bytes */
long pr_wflags; /* Watch type flags */
} prwatch_t;
.Ee
\f3pr_vaddr\fP specifies the virtual address of an area of memory
to be watched in the traced process.
\f3pr_size\fP specifies the size of the area, in bytes.
\f3pr_wflags\fP specifies the type of memory access to be
monitored as a bit-mask of one or more of the following flags
(see also PIOCMAP):
.RS
.TP 16
.PD 0
\f3MA_READ\fP
read access
.TP
\f3MA_WRITE\fP
write access
.TP
\f3MA_EXEC\fP
execution access
.PD
.RE
.PP
An entry with a zero value for \f3pr_size\fP
clears any previously-established watched area
starting at the specified virtual address.
An entry with a non-empty \f3pr_wflags\fP bit-mask
establishes a watched area for the virtual address range
specified by \f3pr_vaddr\fP and \f3pr_size\fP.
An entry with an empty \f3pr_wflags\fP bit-mask
is ignored.
.\"An entry with a zero value for \f3pr_size\fP marks the end
.\"of the list; no further watched areas are established or cleared.
.\"An entry with a non-empty \f3pr_wflags\fP bit-mask
.\"establishes a watched area for the virtual address range
.\"specified by \f3pr_vaddr\fP and \f3pr_size\fP.
.\"An entry with an empty \f3pr_wflags\fP bit-mask
.\"clears any previously-established watched area
.\"starting at the specified virtual address;
.\"\f3pr_size\fP need not match the value used to establish
.\"the watched area, but it must be non-zero.
.PP
A watchpoint is triggered when the traced process makes
a memory reference that covers at least one byte of a watched area
and the memory reference is a mode of interest as
specified in \f3pr_wflags\fP.
When a watchpoint is triggered, the process incurs a watchpoint trap.
If FLTWATCH is being traced, the process stops;
otherwise it is sent SIGTRAP;
if SIGTRAP is being traced and not held, the process stops.
If the access is a write access, the memory is not modified.
If the process stops, its program counter refers to
the instruction that triggered the watchpoint.
\f3pr_info\fP in the \f3prstatus\fP structure contains
information pertinent to the watchpoint trap.
In particular, the \f3si_addr\fP field contains the
virtual address of the memory reference that triggered the
watchpoint and the \f3si_code\fP field contains one of
\f3MA_READ\fP, \f3MA_WRITE\fP,
or \f3MA_EXEC\fP,
indicating read, write or execute access, respectively.
.PP
A watchpoint may be triggered while executing a system call
that makes reference to the traced process's memory.
Such a system call completes normally; a kernel watchpoint fault
is taken after the system call completes but
before the process returns to user level.
If more than one watchpoint would be triggered by the system call,
the first one encountered is the one reported.
.PP
PIOCSWATCH fails with EINVAL
if an attempt is made
to specify overlapping watched areas or
to specify a watchpoint whose virtual address
range includes invalid virtual addresses in the traced process.
PIOCSWATCH fails with E2BIG
if an attempt is made
to establish more than the supported number of watched areas and
with ESRCH if an attempt is made to delete a non-existent watchpoint.
An attempt to delete watchpoints on a running process
could result in failure with errno set to EBUSY.
This is a temporary condition that occurs when the kernel is stepping
over a watchpoint and a later subsequent attempt
should succeed.
This does not happen if the process is stopped.
.PP
Access to a process's memory through \f2/proc\fP will not trigger
a watchpoint,
even if the access is from the process itself (which must have opened
its own \f2/proc\fP entry).
.SS PIOCGWATCH
PIOCGWATCH returns, in the array of \f3prwatch\fP structures
addressed by \f2p\fP, the set of watched areas currently in effect.
Elements beyond the number of actually established watched areas
are filled with zeros.
.SS *PIOCSET *PIOCRESET
PIOCSET sets one or more modes of operation
for the traced process.
PIOCRESET resets these modes.
The modes to be set or reset are specified by
flags in a \f2long\fP addressed by \f2p\fP:
.PP
.RS
.TP 16
\f3PR_FORK\fP
(inherit-on-fork) When set, the process's tracing flags are inherited
by the child of a \f2fork\fP(2).
When reset, child processes start with all tracing flags cleared.
.TP
\f3PR_RLC\fP
(run-on-last-close) When set and the last writable \f2/proc\fP file descriptor
referring to the traced process is closed,
all of the process's tracing flags are cleared,
any outstanding stop directive is canceled,
and if the process is stopped, it is
set running as though PIOCRUN had been applied to it.
When reset, the process's tracing flags are retained and the process
is not set running on last close.
.TP
\f3PR_KLC\fP
(kill-on-last-close) When set and the last writable \f2/proc\fP file descriptor
referring to the traced process is closed,
the process is terminated with SIGKILL.
.RE
.PP
It is an error (EINVAL) to specify flags other than those
described above or to apply these operations to a system process.
The current modes are reported in the \f3prstatus\fP structure
(see PIOCSTATUS).
.PP
Note that a processes using \f2/proc\fP can not
assume any default settings
for these flags, as some other process may have attached to the target
earlier and reset the flags and then detached.
.SS PIOCGREG *PIOCSREG
These operations respectively get and set the process general registers
into or out of an array addressed by \f2p\fP;
the array has type \f3gregset_t\fP.
Register contents are accessible using a set of predefined
indices (see PIOCSTATUS).
No bits of the processor-status register (PSR)
or other privileged registers
can be modified by PIOCSREG.
.PP
PIOCSREG fails (EBUSY) if applied to a process
that is not stopped on an event of interest.
If the process is not stopped, the register values
returned by PIOCGREG are undefined.
.SS PIOCGFPREG *PIOCSFPREG
These operations respectively get and set the process floating-point
registers into or out of a structure addressed by \f2p\fP;
the structure has type \f3fpregset_t\fP.
An error (EINVAL) is returned if there is no floating-point
hardware on the machine.
PIOCSFPREG fails (EBUSY) if applied to a process
that is not stopped on an event of interest.
If the process is not stopped, the register values
returned by PIOCGFPREG are undefined.
.SS *PIOCNICE
The traced process's \f2nice\fP(2) priority is incremented by
the amount contained in the \f2int\fP addressed by \f2p\fP.
Only the superuser may better a process's priority in this way,
but any user may make the priority worse.
.SS PIOCPSINFO
This returns miscellaneous process information such
as that reported by \f2ps\fP(1).
\f2p\fP is a pointer to a \f3prpsinfo\fP structure
containing at least the following fields:
.Ex
typedef struct prpsinfo {
char pr_state; /* numeric process state (see pr_sname) */
char pr_sname; /* printable character representing pr_state */
char pr_zomb; /* !=0: process terminated but not waited for */
char pr_nice; /* nice for cpu usage */
u_long pr_flag; /* process flags */
uid_t pr_uid; /* real user id */
gid_t pr_gid; /* real group id */
pid_t pr_pid; /* unique process id */
pid_t pr_ppid; /* process id of parent */
pid_t pr_pgrp; /* pid of process group leader */
pid_t pr_sid; /* session id */
caddr_t pr_addr; /* physical address of process */
long pr_size; /* size of process image in pages */
long pr_rssize; /* resident set size in pages */
long pr_pagesize; /* system page size, in bytes */
caddr_t pr_wchan; /* wait addr for sleeping process */
timespec_t pr_start; /* process start time, sec+nsec since epoch */
timespec_t pr_time; /* usr+sys cpu time for this process */
long pr_pri; /* priority, high value is high priority */
char pr_oldpri; /* pre-SVR4, low value is high priority */
char pr_cpu; /* pre-SVR4, cpu usage for scheduling */
dev_t pr_ttydev; /* controlling tty device (PRNODEV if none) */
char pr_clname[8]; /* Scheduling class name */
char pr_fname[PRCOMSIZ]; /* last component of exec()ed pathname */
char pr_psargs[PRARGSZ]; /* initial characters of arg list */
u_int pr_pset; /* associated processor set name */
cpuid_t pr_sonproc; /* processor running on */
timespec_t pr_ctime; /* usr+sys cpu time for all children */
} prpsinfo_t;
.Ee
Some of the entries in \f3prpsinfo\fP, such as \f3pr_state\fP and
\f3pr_flag\fP, are system-specific and should not be expected to retain
their meanings across different versions of the operating system.
\f3pr_addr\fP is a vestige of the past and has no real
meaning in current systems.
.PP
PIOCPSINFO can be applied to a \f2zombie\fP process
(one that has terminated but whose parent has not yet performed a
\f2wait\fP(2) on it).
.SS PIOCNMAP PIOCMAP
These operations provide information about the memory mappings
(virtual address ranges) associated with the traced process.
PIOCNMAP returns, in the \f2int\fP addressed by \f2p\fP,
the number of mappings that are currently active.
The PIOCMAP operation may be used to obtain the list of
currently active mappings, which is an array of structures of type
\f3prmap_t\fP.
The PIOCNMAP may be used to determine the minimum amount of storage
that needs to be allocated to receive these structures, but the
programmer should not assume that it is the maximum amount needed.
If the PIOCNMAP and PIOCMAP calls are made on a process that is not
stopped, the number of maps could change between the two ioctl calls
and caller could fault if too few maps were allocated to hold the
results of PIOCMAP.
Note: for a better interface, see PIOCMAP_SGI below.
For PIOCMAP, \f2p\fP addresses an array of elements of type
\f3prmap_t\fP; one array element (one structure) is returned for
each mapping, plus an additional element containing all zeros
to mark the end of the list.
The \f3prmap\fP structure contains at least the following fields:
.Ex
typedef struct prmap {
caddr_t pr_vaddr; /* Virtual address */
u_long pr_size; /* Size of mapping in bytes */
off_t pr_off; /* Offset into mapped object, if any */
long pr_mflags; /* Protection and attribute flags */
} prmap_t;
.Ee
\f3pr_vaddr\fP is the virtual address of the
mapping within the traced process and \f3pr_size\fP is its size in bytes.
\f3pr_off\fP is the offset within the mapped object (if any)
to which the virtual address is mapped.
.PP
\f3pr_mflags\fP is a bit-mask of protection and attribute flags:
.RS
.TP 16
.PD 0
\f3MA_READ\fP
mapping is readable by the traced process
.TP
\f3MA_WRITE\fP
mapping is writable by the traced process
.TP
\f3MA_EXEC\fP
mapping is executable by the traced process
.TP
\f3MA_SHARED\fP
mapping changes are shared by the mapped object
.TP
\f3MA_BREAK\fP
mapping is grown by the \f2brk\fP(2) system call
.TP
\f3MA_STACK\fP
mapping is grown automatically on stack faults
.TP
\f3MA_PHYS\fP
mapping corresponds to a physical device mapping
.PD
.RE
.SS PIOCMAP_SGI
This operation provides detailed information about the memory mappings
(virtual address ranges) associated with the traced process.
PIOCMAP_SGI returns either -1 or the number of of mappings
that are currently active.
In effect it performs both a PIOCNMAP
and a PIOCMAP call (with additional information) with one ioctl.
The PIOCMAP_SGI operation may be used to obtain the list of
currently active mappings, which is an array of structures of type
\f3prmap_sgi_t\fP.
The user must preallocate an array of the maximum
number of mapping structures they are willing to receive.
One array element (one structure) is returned for
each mapping, plus an additional element containing all zeros
that also marks the end of the list.
For PIOCMAP_SGI, \f2p\fP addresses a pointer to a structure called
\f3prmap_sgi_arg_t\fP.
It contains the following fields:
.Ex
typedef struct prmap_sgi_arg {
caddr_t pr_vaddr; /* Base of map buffer */
ulong_t pr_size; /* Size of buffer in bytes */
} prmap_sgi_arg_t;
.Ee
\f3pr_vaddr\fP is the virtual address of the buffer to hold the mappings
for the traced process and \f3pr_size\fP is its size in bytes.
The \f3prmap_sgi_t\fP structure contains at least the following fields:
.Ex
typedef struct prmap_sgi {
caddr_t pr_vaddr; /* Virtual base address */
ulong_t pr_size; /* Size of mapping in bytes */
off_t pr_off; /* Offset into mapped object, if any */
ulong_t pr_mflags; /* Protection and attribute flags */
pgno_t pr_vsize; /* # valid pages in this segment */
pgno_t pr_psize; /* # private pages in this segment */
pgno_t pr_wsize; /* Cost for this proc weighted base 256 */
pgno_t pr_rsize; /* # referenced pages in this segment */
pgno_t pr_msize; /* # modified pages in this segment */
dev_t pr_dev; /* Device # of segment iff mapped */
ino_t pr_ino; /* Inode # of segment iff mapped */
} prmap_sgi_t;
.Ee
\f3pr_vaddr\fP is the virtual address of the
mapping within the traced process and \f3pr_size\fP is its size in bytes.
\f3pr_off\fP is the offset within the mapped object (if any)
to which the virtual address is mapped.
\f3pr_vsize\fP, \f3pr_psize\fP, \f3pr_wsize\fP, \f3pr_rsize\fP, \f3pr_msize\fP
are page counts for the virtual mapping.
\f3pr_dev\fP and \f3pr_dev\fP identify the filesystem resident object from
which the mapping originates (if one exists).
.PP
\f3pr_mflags\fP is a bit-mask of protection and attribute flags:
.RS
.TP 16
.PD 0
\f3MA_READ\fP
mapping is readable by the traced process
.TP
\f3MA_WRITE\fP
mapping is writable by the traced process
.TP
\f3MA_EXEC\fP
mapping is executable by the traced process
.TP
\f3MA_SHARED\fP
mapping changes are shared by the mapped object
.TP
\f3MA_BREAK\fP
mapping is grown by the \f2brk\fP(2) system call
.TP
\f3MA_STACK\fP
mapping is grown automatically on stack faults
.TP
\f3MA_PHYS\fP
mapping corresponds to a physical device mapping
.TP
\f3MA_PRIMARY\fP
mapping is one of the processes core segments
.TP
\f3MA_COW\fP
mapping corresponds to a copy on write segment
.TP
\f3MA_NOTCACHED\fP
mapped address segment is not cached
.TP
\f3MA_SHMEM\fP
mapping corresponds to a shared memory mapping
.TP
\f3MA_REFCNT_SHIFT\fP
amount to shift right mflags to get reference count
.PD
.RE
.SS PIOCPGD_SGI
This operation provides information about the interior of a memory mappings
(virtual address ranges) associated with the traced process.
The PIOCPGD_SGI operation is be used to obtain the list of
page descriptors, which is an array of structures of type
\f3pgd_t\fP.
The PIOCMAP_SGI ioctl may be used to determine the
amount of storage that needs to be allocated to receive these
structures.
For PIOCPGD_SGI, \f2p\fP addresses a pointer to a
\f3prpgd_sgi_t\fP structure that contains an array of elements of type
\f3prpgd_t\fP.
The \f3pgd_t\fP structure contains at least the following fields:
.Ex
typedef struct pgd { /* per-page data */
short pr_flags; /* flags */
short pr_value; /* page count/fault offset */
} pgd_t;
.Ee
The \f3prpgd_sgi_t\fP structure contains at least the following fields:
.Ex
typedef struct prpgd_sgi {
caddr_t pr_vaddr; /* virtual base address of region to stat */
pgno_t pr_pglen; /* number of pages in data list... */
pgd_t pr_data[1]; /* variable length array of page flags */
} prpgd_sgi_t;
.Ee
\f3pr_vaddr\fP is the virtual address of the
mapping within the traced process and \f3pr_pglen\fP is length of the
\f3pr_data\fP array.
.PP
The \f3pr_flags\fP field for each page contains the following flags:
.RS
.TP 16
.PD 0
\f3PGF_REFERENCED\fP
page is currently valid in system page table
.TP
\f3PGF_GLOBAL\fP
page is marked global in system page table
.TP
\f3PGF_WRITEABLE\fP
page is currently writeable in system page table
.TP
\f3PGF_NOTCACHED\fP
page is marked non-cacheable in system page table
.TP
\f3PGF_ISVALID\fP
page is marked valid for this process
.TP
\f3PGF_ISDIRTY\fP
page is marked dirty for this process
.TP
\f3PGF_PRIVATE\fP
page is marked private to this process
.TP
\f3PGF_FAULT\fP
the pr_value field contains a fault offset
.TP
\f3PGF_USRHISTORY\fP
accumulating history flag for caller
.TP
\f3PGF_REFHISTORY\fP
page has been marked referenced
.TP
\f3PGF_WRTHISTORY\fP
page has been marked dirty
.TP
\f3PGF_VALHISTORY\fP
page has been marked valid
.TP
\f3PGF_CLEAR\fP
clear valid & writeable bits in page table
.PD
.RE
.PP
The \f3pr_value\fP field for each page contains either a reference count
or a fault offset value if the \f3PGF_CLEAR\fP operation was set on a
previous call.
This can be used to determine what function or variable
inside a page that the process references or writes frequently.
.PP
.SS PIOCOPENM
The return value \f2retval\fP provides a read-only file descriptor
for a mapped object associated with the traced process.
If \f2p\fP is zero the traced process's \f2exec\fP(2)ed file is found.
This enables a debugger to find the object file symbol table
without having to know the pathname of the executable file.
If \f2p\fP is non-zero it points to a \f3caddr_t\fP containing a virtual
address within the traced process and the mapped object, if any,
associated with that address is found; this can be used to get a
file descriptor for a shared library that is attached to the process.
On error (invalid address, physical device mapping,
or no mapped object for the designated address),
\-1 is returned and errno is set to EINVAL.
.SS PIOCCRED
Fetch the set of credentials associated with the process.
\f2p\fP points to an instance of \f3prcred_t\fP that is filled
by the operation.
The \f3prcred\fP structure contains at least the following fields:
.Ex
typedef struct prcred {
uid_t pr_euid; /* Effective user id */
uid_t pr_ruid; /* Real user id */
uid_t pr_suid; /* Saved user id (from exec) */
gid_t pr_egid; /* Effective group id */
gid_t pr_rgid; /* Real group id */
gid_t pr_sgid; /* Saved group id (from exec) */
u_int pr_ngroups; /* Number of supplementary groups */
} prcred_t;
.Ee
.SS PIOCGROUPS
Fetch the set of supplementary group IDs
associated with the process.
\f2p\fP points to an array of elements of type \f3gid_t\fP,
that will be filled by the operation.
PIOCCRED can be applied beforehand
to determine the number of groups
(\f3pr_ngroups\fP) that will be returned
and the amount of storage that should be allocated to hold them.
.SS PIOCTLBMISS
Enable special user TLB handling.
The TLB is a hardware coprocessor that makes virtual-to-physical
address translations.
\f2p\fP points to an integer that specifies the handling desired.
If the value is \f3TLB_COUNT\fP, a record will be kept of every
virtual-address TLB refill that occurs while the process mapped
by \f2fildes\fP is running.
If the value is \f3TLB_STD\fP, counting will be disabled (the default
mode).
It is important to note that monitoring TLB efficiency can be a
useful tool, but the performance of the code that refills the TLB will
be degraded.
.PP
The TLB refill counts can be obtained by \f3PIOCUSAGE\fP.
The \f3struct prusage\fP field \f3pu_utlb\fP accounts for TLB refills
that occurred while the process was running in user mode, and the
field \f3pu_ktlb\fP accounts for refills that occurred while executing
system calls on behalf of the user or while handling hardware interrupt
code while the user process was scheduled.
.SS PIOCUSAGE
PIOCUSAGE returns process usage information.
\f2p\fP points to a \f3prusage\fP structure
that is filled by the operation.
The fields in a \f3prusage\fP structure are implementation dependent;
no application can assume portability in this area.
See \f2<sys/procfs.h>\fP for the exact definition
for a particular implementation.
.PP
The SGI implementation supports the following fields:
.Ex
typedef struct prusage {
timespec_t pu_tstamp; /* time stamp */
timespec_t pu_starttime; /* process start time */
timespec_t pu_utime; /* user CPU time */
timespec_t pu_stime; /* system CPU time */
u_long pu_minf; /* minor (mapping) page faults */
u_long pu_majf; /* major (disk) page faults */
u_long pu_utlb; /* user TLB misses */
u_long pu_nswap; /* number of swaps */
u_long pu_gbread; /* gigabytes ... */
u_long pu_bread; /* and bytes read */
u_long pu_gbwrit; /* gigabytes ... */
u_long pu_bwrit; /* and bytes written */
u_long pu_sigs; /* signals received */
u_long pu_vctx; /* voluntary context switches */
u_long pu_ictx; /* involuntary context switches */
u_long pu_sysc; /* system calls */
u_long pu_syscr; /* read() system calls */
u_long pu_syscw; /* write() system calls */
u_long pu_syscps; /* poll() or select() system calls */
u_long pu_sysci; /* ioctl() system calls */
u_long pu_graphfifo; /* graphics pipeline stalls */
u_long pu_graph_req[8]; /* graphics resource requests */
u_long pu_graph_wait[8]; /* graphics resource waits */
u_long pu_size; /* size of swappable image in pages */
u_long pu_rss; /* resident size of swappable image */
u_long pu_inblock; /* block input operations */
u_long pu_oublock; /* block output operations */
u_long pu_vfault; /* total number of vfaults */
u_long pu_ktlb; /* kernel TLB misses */
} prusage_t;
.Ee
.SS PIOCGETPTIMER
PIOCGETPTIMER returns an array of timers indicating the amount of time the
process has spent in each of the following states:
.Ex
#include <time.h>
#include <sys/timers.h>
struct timespec ptime[MAX_PROCTIMER];
.Ee
.RS
.TP 16
.PD 0
\f3AS_USR_RUN\fP
running in user mode
.TP 16
\f3AS_SYS_RUN\fP
running in system mode
.TP 16
\f3AS_INT_RUN\fP
running in interrupt mode
.TP 16
\f3AS_BIO_WAIT\fP
waiting for block I/O
.TP 16
\f3AS_MEM_WAIT\fP
waiting for memory
.TP 16
\f3AS_SELECT_WAIT\fP
waiting in select
.TP 16
\f3AS_JCL_WAIT\fP
stopped because of job control
.TP 16
\f3AS_RUNQ_WAIT\fP
waiting to run on run queue
.TP 16
\f3AS_SLEEP_WAIT\fP
waiting for resource
.TP 16
\f3AS_STRMON_WAIT\fP
waiting for the stream monitor
.TP 16
\f3AS_PHYSIO_WAIT\fP
waiting for raw I/O
.PD
.RE
.PP
\f2p\fP is a pointer to an array of \f3MAX_PROCTIMER\fP \f3timespec\fP
structures.
.SS PIOCOPENPD
PIOCOPENPD is not currently implemented on SGI machines.
It is under consideration for future releases.
.PP
The return value \f2retval\fP provides a read-only file descriptor
for a ``page data file'', enabling tracking of address space
references and modifications on a per-page basis.
.PP
A \f2read\fP(2) of the page data file descriptor returns structured page data
and atomically clears the page data maintained for the file by the system.
That is to say, each read returns data collected since the last read;
the first read returns data collected since the file was opened.
When the call completes, the read buffer contains the following
structure as its header and thereafter
contains a number of variable length structures
that must be accessed by walking linearly through the buffer.
.PP
.Ex
typedef struct prpageheader {
timespec_t tstamp; /* real time time stamp */
u_long nmap; /* number of address space mappings */
u_long npage; /* total number of pages */
} prpageheader_t;
.Ee
The header is followed by \f3nmap\fP variable-length
\f3prasmap\fP structures:
.PP
.Ex
typedef struct prasmap {
caddr_t vaddr; /* virtual address */
u_long npage; /* number of pages in mapping */
u_char data[1]; /* referenced, modified, present flags */
} prasmap_t;
.Ee
The \f3data\&[\&]\fP array is of variable length, with one entry
for each page in the mapping, \f3npage\fP entries altogether,
rounded up with empty entries at the end so that the structure
size is an integral numbers of long's.
\f3data\&[\&]\fP entries may contain these flags:
.PP
.RS
.PD 0
.TP 16
\f3PG_PRESENT\fP
page is resident in memory now
.TP
\f3PG_REFERENCED\fP
page has been referenced since last read
.TP
\f3PG_MODIFIED\fP
page has been modified since last read
.RE
.PD
.PP
If the read buffer is not large enough to contain all of the page
data, the read fails with E2BIG and the page data is not cleared.
The required size of the read buffer can be determined through \f2fstat\fP(2).
Application of \f2lseek\fP(2) to the page data file descriptor is ineffective.
Closing the page data file terminates the system overhead
associated with collecting the data.
.SS PIOCGETPR PIOCGETU
These operations copy, respectively, the traced process's \f2proc\fP
structure and \f2user area\fP into the buffer addressed by \f2p\fP.
They are provided for completeness
but it should be unnecessary to access either
of these structures directly since relevant status information
is available through other control operations.
Their use is discouraged because a program making use of them
is tied to a particular version of the operating system.
.PP
PIOCGETPR can be applied to a \f2zombie\fP process
(see PIOCPSINFO).
.SS PIOCACINFO
PIOCACINFO returns the currently accumulated accounting
information for the process.
\f2p\fP points to a \f3pracinfo\fP structure that is filled in by the
operation.
The fields in \f3pracinfo\fP are implementation dependent; no
application can assume portability in this area.
See \f2<sys/procfs.h>\fP and \f2<sys/extacct.h>\fP for the exact
definition of a particular implementation.
.PP
The SGI implementation supports the following fields:
.Ex
typedef struct pracinfo {
char pr_version; /* Accounting data version */
char pr_flag; /* Miscellaneous flags */
char pr_nice; /* Nice value */
unchar pr_sched; /* Scheduling discipline */
/* (see sys/schedctl.h) */
__int32_t pr_spare1; /* reserved */
ash_t pr_ash; /* Array session handle */
prid_t pr_prid; /* Project ID */
time_t pr_btime; /* Begin time (in secs since 1970)*/
time_t pr_etime; /* Elapsed time (in HZ) */
__int32_t pr_spare2[2]; /* reserved */
struct acct_timers pr_timers; /* Assorted timers: see extacct.h */
struct acct_counts pr_counts; /* Assorted counters: (ditto) */
__int64_t pr_spare3[8]; /* reserved */
} pracinfo_t;
.Ee
.SS PIOCGETSN0EXTREFCNTRS PIOCGETSN0REFCNTRS
PIOCGETSN0EXTREFCNTRS returns the extended memory reference counter values
in an Origin system for a specified virtual address space range.
See refcnt(5).
.PP
The third argument is used to specify the virtual address space range
and the user buffer where to store the counter values. This argument is
of type sn0_refcnt_args_t, as defined in <sys/SN/hwcntrs.h>:
.PP
.Ex
typedef struct sn0_refcnt_args {
caddr_t vaddr;
long len;
sn0_refcnt_buf_t* buf;
} sn0_refcnt_args_t;
.Ee
.PP
The first field \f3vaddr\fP is the base of the virtual address space range,
the field \f3len\fP is the corresponding length in bytes, and the field
\f3buf\fP is a pointer to a user buffer where the system will store
the counter values and additional information. This buffer is an array
of elements of type sn0_refcnt_buf_t, where each element corresponds
to the counter information associated with one hardaware page:
.PP
.Ex
typedef struct sn0_refcnt_buf {
sn0_refcnt_set_t refcnt_set;
__uint64_t paddr;
__uint64_t page_size;
cnodeid_t cnodeid;
} sn0_refcnt_buf_t;
.Ee
.PP
The field \f3refcnt_set\fP contains the set of counters associated
with the virtual address passed via \f3sn0_refcnt_args\fP, \f3paddr\fP is the
address of the physical page associated with this virtual address,
\f3page_size\fP is the page size being used to map it, and \f3cnodeid\fP
is the physical page home node, expressed in terms of \fICompact
Node Identifiers\fP which can be mapped back to node names using the
command topology(1).
The \f3refcnt_set\fP type is defined by
.PP
.Ex
typedef struct sn0_refcnt_set {
refcnt_t refcnt[SN0_REFCNT_MAX_COUNTERS];
__uint64_t flags;
} sn0_refcnt_set_t;
.Ee
.PP
The field \f3refcnt\fP is the actual set of counters (one counter
per node), and \f3flags\fP
is a state vector reserved for future use.
The counters in \f3refcnt\fP are ordered according to the
\fICompact Node Identifiers\fP, also known as \f3cnodeids\fP (numa(5)).
.PP
PIOCGETSN0REFCNTRS instructs the system to return the
actual hardware counter values instead of the extended software counter
values returned by PIOCGETSN0EXTREFCNTRS.
.PP
The following section of code shows an example of use for this interface:
.PP
.Ex
#include <sys/types.h>
#include <stdio.h>
#include <malloc.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/prctl.h>
#include <procfs/procfs.h>
#include <sys/syssgi.h>
#include <sys/sysmp.h>
#include <sys/SN/hwcntrs.h>
/*
* This routine makes two assumptions that may not
* be true in all systems:
* Length of hardware page (counter granularity): 0x1000 bytes
* Length of base software page (smallest mappable memory area): 0x4000 bytes
*/
void
print_refcounters(char* vaddr, int len)
{
pid_t pid = getpid();
char pfile[256];
int fd;
sn0_refcnt_buf_t* refcnt_buffer;
sn0_refcnt_buf_t* direct_refcnt_buffer;
sn0_refcnt_args_t* refcnt_args;
int npages;
int gen_start;
int numnodes;
int page;
int node;
sprintf(pfile, "/proc/%05d", pid);
if ((fd = open(pfile, O_RDONLY)) < 0) {
fprintf(stderr,"Can't open /proc/%d", pid);
exit(1);
}
vaddr = (char *)( (unsigned long)vaddr & ~0xfff );
npages = (len + 0xfff) >> 12;
if ((refcnt_buffer = malloc(sizeof(sn0_refcnt_buf_t) * npages)) == NULL) {
perror("malloc refcnt_buffer");
exit(1);
}
if ((direct_refcnt_buffer = malloc(sizeof(sn0_refcnt_buf_t) * npages)) == NULL) {
perror("malloc refcnt_buffer");
exit(1);
}
if ((refcnt_args = malloc(sizeof(sn0_refcnt_args_t))) == NULL) {
perror("malloc refcnt_args");
exit(1);
}
refcnt_args->vaddr = vaddr;
refcnt_args->len = len;
refcnt_args->buf = refcnt_buffer;
if ((gen_start = ioctl(fd, PIOCGETSN0EXTREFCNTRS, (void *)refcnt_args)) < 0) {
perror("ioctl PIOCGETSN0EXTREFCNTRS returns error");
exit(1);
}
refcnt_args->vaddr = vaddr;
refcnt_args->len = len;
refcnt_args->buf = direct_refcnt_buffer;
if ((gen_start = ioctl(fd, PIOCGETSN0REFCNTRS, (void *)refcnt_args)) < 0) {
perror("ioctl PIOCGETSN0REFCNTRS returns error");
exit(1);
}
if ((numnodes = sysmp(MP_NUMNODES)) < 0) {
perror("sysmp MP_NUMNODES");
exit(1);
}
for (page = 0; page < npages; page++) {
printf("page[%05d, 0x%lx, 0x%llx (0x%llx)]:",
page,
vaddr + page*0x1000,
refcnt_buffer[page].paddr,
refcnt_buffer[page].paddr >> 14);
for (node = 0; node < numnodes; node++) {
printf(" %05lld (%06lld)",
refcnt_buffer[page].refcnt_set.refcnt[node],
direct_refcnt_buffer[page].refcnt_set.refcnt[node]);
}
printf("\n");
}
close(fd);
free(refcnt_args);
free(refcnt_buffer);
}
.Ee
.SS PIOCGETINODE
PIOCGETINODE returns information about an open file for the process.
\f2p\fP points to a \f3prinodeinfo\fP structure containing the
file descriptor of interest (in \f3pi_fd\fP).
On return \f3pi_dev\fP, \f3pi_inum\fP, and \f3pi_gen\fP contain the
filesystem device, inode number, and inode generation number
respectively.
Further information about the file can then be obtained through
\f2syssgi\fP(\f3SGI_FS_BULKSTAT\fP), for instance.
The \f3pi_dev\fP value matches that returned by \f2statvfs\fP (\f3f_fsid\fP)
and \f2stat\fP (\f3st_dev\fP).
Bad values for \f3pi_fd\fP result in EBADF errors;
if the referenced file is actually a socket then errno is set to EINVAL.
Filesystems other than XFS and EFS return 0 for the \f3pi_gen\fP value.
.SH NOTES
Each operation (\f2ioctl\fP or I/O) is guaranteed to be atomic with
respect to the traced process, except when applied to a system process.
.PP
To wait for one or more of a set of processes to stop,
\f2/proc\fP file descriptors can be used in a \f2poll\fP(2) system call.
On successful return, the polling event POLLPRI
indicates that the process has stopped on an ``event of interest'' (see
\f3PIOCSTOP\fP above).
Although they cannot be requested, the polling events
POLLHUP, POLLERR and POLLNVAL
may be returned.
POLLHUP indicates that the process has terminated.
POLLERR indicates that the file descriptor has become invalid.
POLLNVAL is returned immediately if POLLPRI is requested
on a file descriptor referring to either itself or a system process
(see PIOCSTOP).
\f2/proc\fP file descriptors may also be used in a \f2select\fP(2)
system call.
Selecting for an exceptional event has the same semantics as
polling for POLLPRI.
Selecting for reading or writing or polling for POLLIN or POLLOUT
will always return true.
See the \f2poll\fP(2) and \f2select\fP(2) man pages
for further details.
.PP
\f2poll\fP() or \f2select\fP() may not be used on the /proc directory
itself.
.PP
For security reasons, except for the superuser, an open of a
\f2/proc\fP file fails unless both the user-ID and group-ID of
the caller match those of the traced process and the process's
object file is readable by the caller.
Files corresponding to setuid
and setgid processes can be opened only by the superuser.
Even if held by the superuser, an open process file descriptor
becomes invalid if the traced process performs an \f2exec\fP() of a
setuid/setgid object file or an object file that it cannot read.
Any operation performed on an invalid file descriptor,
except \f2close\fP(2), fails with EAGAIN.
In this situation, if any tracing flags are set and the process
file descriptor is open for writing, the process will
have been directed to stop and
its run-on-last-close flag will have been set (see PIOCSET).
This enables a controlling process (if it has permission) to reopen
the process file to get a new valid file descriptor, close the
invalid file descriptor, and proceed.
Just closing the invalid file descriptor causes the traced process
to resume execution with no tracing flags set.
Any process not currently open for writing via \f2/proc\fP but that has
left-over tracing flags from a previous open and that \f2exec\fPs
a setuid/setgid or unreadable object file will not be stopped
but will have all its tracing flags cleared.
.PP
Descriptions of structures in this document include only interesting
structure elements, not filler and padding fields, and
may show elements out of order for descriptive clarity.
The actual structure definitions are contained in \f2<sys/procfs.h>\fP.
.PP
For reasons of symmetry and efficiency
there are more control operations than strictly necessary.
.PP
Programs compiled with the old 32-bit abi calling convention can
perform ioctls on programs compiled with the new 32-bit abi or 64-bit abi
calling conventions by "or'ing" the ioctl with PIOC_IRIX5_N32 or
PIOC_IRIX5_64, respectively, and passing in a pointer to a buffer that is
big enough to hold the larger structure.
.SH FILES
.PD 0
.TP 16
/proc
directory (list of active processes)
.TP
/proc/\f2nnnnn\fP
process image
.PD
.SH SEE ALSO
mntproc(1M),
ioctl(2),
open(2),
poll(2),
ptrace(2),
sigaction(2),
signal(2),
stat(2),
statvfs(2),
syssgi(2),
siginfo(5),
signal(5).
.SH DIAGNOSTICS
Errors that can occur in addition to the
errors normally associated with filesystem access:
.TP 16
ENOENT
The traced process has terminated after being opened.
.TP
EIO
I/O was attempted at an illegal address in the traced process.
.TP
ENXIO
I/O was attempted to an isolated processes address space.
.TP
EBADF
An I/O or \f2ioctl\fP operation requiring write access was
attempted on a file descriptor not open for writing;
PIOCGETINODE was applied to a process file which was not open.
.TP
EBUSY
PIOCSTOP or PIOCWSTOP was applied to a system process;
an exclusive \f2open\fP(2) was attempted
on a process file already open for writing;
an \f2open\fP(2) for writing was attempted
and an exclusive open is in effect on the process file;
PIOCRUN, PIOCSREG or PIOCSFPREG
was applied to a process not stopped on an event of interest;
an attempt was made to mount \f2/proc\fP when it is already mounted.
.TP
EPERM
Someone other than the superuser attempted to better
a process's priority by issuing PIOCNICE.
.TP
ENOSYS
An attempt was made to perform an unsupported operation
(such as create, remove, link, or unlink) on an entry in \f2/proc\fP.
.TP
EFAULT
An I/O or \f2ioctl\fP request referred to an invalid
address in the controlling process.
.TP
EINVAL
In general this means that some invalid argument
was supplied to a system call.
The list of conditions eliciting this error includes:
the \f2ioctl\fP code is undefined;
the \f2ioctl\fP code is not implemented;
an \f2ioctl\fP operation was issued on a file descriptor
referring to the \f2/proc\fP directory;
an out-of-range signal number was specified with
PIOCSSIG, PIOCKILL, or PIOCUNKILL;
SIGKILL was specified with PIOCUNKILL;
an illegal virtual address was specified in a PIOCOPENM request;
overlapping watched areas were specified in a PIOCSWATCH request;
an attempt was made to establish more than the supported number
of watched areas in a PIOCSWATCH request;
PIOCGFPREG or PIOCSFPREG was issued on
a machine without floating-point hardware;
the file specified to PIOCGETINODE is a socket.
.TP
E2BIG
Data to be returned in a \f2read\fP(2) of the page data file
exceeds the size of the read buffer provided by the caller.
.TP
EINTR
A signal was received by the controlling process while waiting for
the traced process to stop via PIOCSTOP or PIOCWSTOP.
.TP
EAGAIN
The traced process has performed an \f2exec\fP
of a setuid/setgid object file
or of an object file that it cannot read;
all further operations on the process file descriptor
(except \f2close\fP(2)) elicit this error.
.SH BUGS
When a signal is sent to the target process, but it is
cleared (either by PIOCUNKILL or by using the PRCSIG
flag to PIOCRUN),
most system calls complete normally and do not return EINTR.
However, the specific system calls \f2msgsnd\fP(2), \f2msgrcv\fP(2),
\f2semop\fP(2),
\f2uspsema\fP(3P), \f2poll\fP(2) and \f2ioctl\fP(2)
to the \f2imon\fP(7M) device
are interrupted and do return EINTR.
View Git Blame Copy Permalink