mirror of
https://github.com/tonusoo/koduinternet-cpe
synced 2024-11-11 05:41:00 +02:00
131 lines
3.3 KiB
Plaintext
131 lines
3.3 KiB
Plaintext
# Use the 802.11 Netlink based interface between the hostapd
|
|
# and cfg80211 kernel module.
|
|
driver=nl80211
|
|
|
|
interface=wlan0
|
|
|
|
# Add the interface wlan0 into bridge br0.
|
|
bridge=br0
|
|
|
|
# Log from all modules(IEEE 802.11, driver interface, etc) starting
|
|
# from "verbose debugging" severity level.
|
|
logger_syslog=-1
|
|
logger_syslog_level=0
|
|
|
|
# Creates an UNIX domain socket in /var/run/hostapd
|
|
# directory for listening to requests from external
|
|
# programs(for example hostapd_cli) for status info
|
|
# and configuration.
|
|
ctrl_interface=/var/run/hostapd
|
|
ctrl_interface_group=0
|
|
|
|
|
|
|
|
#
|
|
# IEEE 802.11 related configuration
|
|
#
|
|
ssid=r1
|
|
|
|
# Country code for regulatory domain. This can limit
|
|
# available channels and transmit power.
|
|
# Example output of "iw reg get":
|
|
#
|
|
# country EE: DFS-ETSI
|
|
# (2400 - 2483 @ 40), (N/A, 20), (N/A)
|
|
# (5150 - 5250 @ 80), (N/A, 23), (N/A), NO-OUTDOOR, AUTO-BW
|
|
# (5250 - 5350 @ 80), (N/A, 20), (0 ms), NO-OUTDOOR, DFS, AUTO-BW
|
|
# (5470 - 5725 @ 160), (N/A, 26), (0 ms), DFS
|
|
# (5725 - 5875 @ 80), (N/A, 13), (N/A)
|
|
# (57000 - 66000 @ 2160), (N/A, 40), (N/A)
|
|
country_code=EE
|
|
|
|
# Enable IEEE 802.11d. This advertises the "country_code"
|
|
# and the set of allowed channels and transmit power
|
|
# levels based on the regulatory limits.
|
|
ieee80211d=1
|
|
|
|
# 5 GHz mode. For IEEE 802.11ac, the "hw_mode" needs to be set to "a".
|
|
hw_mode=a
|
|
|
|
# With "vht_oper_chwidth=1" and "vht_oper_centr_freq_seg0_idx=42"
|
|
# configuration options below, the frequency range is 5170 - 5250 MHz
|
|
# with center frequency of 5210 MHz. In other words, channels 36 - 48
|
|
# with channel 36 being a primary channel.
|
|
# Frequency configuration from the hostapd debug output:
|
|
#
|
|
# nl80211: Set freq 5180 (ht_enabled=1, vht_enabled=1, bandwidth=80 MHz, cf1=5210 MHz, cf2=0 MHz)
|
|
# * freq=5180
|
|
# * vht_enabled=1
|
|
# * ht_enabled=1
|
|
# * bandwidth=80
|
|
# * channel_width=3
|
|
# * center_freq1=5210
|
|
# * center_freq2=0
|
|
#
|
|
channel=36
|
|
|
|
# Wi-Fi Multimedia. It provides basic QoS features to IEEE 802.11 networks.
|
|
# According to https://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf WMM has
|
|
# to be enabled in case of IEEE 802.11n High Throughput or IEEE 802.11ac
|
|
# Very High Throughput modes are desired.
|
|
wmm_enabled=1
|
|
|
|
# Disassociate stations based on excessive transmission failures or other
|
|
# indications of connection loss.
|
|
disassoc_low_ack=1
|
|
|
|
# Allow low-level bridging of frames between associated stations in the
|
|
# Wi-Fi network. Additionally, hairpin has to be enabled(bridge link set
|
|
# dev wlan0 hairpin on) in order to allow connectivity between Wi-Fi clients.
|
|
ap_isolate=0
|
|
|
|
|
|
|
|
#
|
|
# IEEE 802.11n related configuration
|
|
#
|
|
ieee80211n=1
|
|
|
|
# Based on the capabilities in the output of "iw list".
|
|
ht_capab=[HT40+] [SHORT-GI-40]
|
|
|
|
|
|
|
|
#
|
|
# IEEE 802.11ac related configuration
|
|
#
|
|
ieee80211ac=1
|
|
|
|
# Based on the "VHT Capabilities" in the output of "iw list".
|
|
vht_capab=[VHT160] [SHORT-GI-80] [SHORT-GI-160] [MU-BEAMFORMER] [MU-BEAMFORMEE]
|
|
|
|
# 80 MHz channel width.
|
|
vht_oper_chwidth=1
|
|
|
|
# Center frequency of 5210 MHz.
|
|
vht_oper_centr_freq_seg0_idx=42
|
|
|
|
|
|
|
|
#
|
|
# WPA/IEEE 802.11i related configuration
|
|
#
|
|
wpa_key_mgmt=WPA-PSK
|
|
wpa_passphrase=<passwd>
|
|
|
|
# WPA2 mode.
|
|
wpa=2
|
|
|
|
# Use CCMP encryption protocol instead of TKIP cipher suite.
|
|
# Output of "get_config" in hostapd_cli:
|
|
#
|
|
# bssid=2c:fd:a1:cf:fd:56
|
|
# ssid=r1
|
|
# wps_state=disabled
|
|
# wpa=2
|
|
# key_mgmt=WPA-PSK
|
|
# group_cipher=CCMP
|
|
# rsn_pairwise_cipher=CCMP
|
|
#
|
|
rsn_pairwise=CCMP
|