vt1200/tools/tms34010-sdk/DOSBOX.md

# Running the DOS tools under DOSBox — headless, at maximum speed

The TI assembler, linker and compiler shipped with this SDK are DOS programs.
This note records how to run them **without a window** and **as fast as DOSBox
can go**, so they can be used from build scripts and batch runs.

Verified 2026-10-18 against **DOSBox 0.74-3** (Debian package) on x86-64 Linux.
All timings below are from that machine; the ratios matter, not the absolute
numbers.

## 1. There is no `-nogui` / `-headless` flag

DOSBox 0.74-3 has no headless option in the binary or in `man dosbox`.
`-help` is not implemented either — it boots the emulator. Do not go looking
for one.

Windowless operation comes from SDL's **dummy** drivers instead. DOSBox then
runs the emulation with no window and no audio device:

```sh
SDL_VIDEODRIVER=dummy SDL_AUDIODRIVER=dummy \
dosbox -exit \
  -conf harness/sdk-scratch/dosbox.conf \
  -c "mount c harness/sdk-scratch/work" \
  -c "c:" \
  -c "GSPA.EXE MYFILE.ASM" \
  -c exit
```

(`GSPA.EXE` is the SDK driver in `harness/sdk-scratch/work`; substitute your
tool. Always keep `-c exit` last — see gotcha 2.)

What was verified:

* Exit status **0**, total wall time ≈ **1 s** including emulator start-up.
* A mounted host directory really receives files the DOS program writes.
* `-c` accepts several commands; they execute in order.
* Redirection works: `dir > listing.txt` and `echo hi > out.txt` both produce
  files inside the mounted drive.

Gotchas, all of which cost time during bring-up:

1. **The DOS console is invisible.** Shell output goes to the emulated video
   buffer, not to stdout. Redirect to a file when you need a transcript.
   The host terminal shows only DOSBox's own start-up lines.
2. **`-exit` alone does not quit** when no program file was given on the command
   line. End the command list with `-c exit` (or wrap the run in `timeout`).
3. **DOS uppercases 8.3 names.** `mkdir foo` creates `FOO`; `echo hi > out.txt`
   creates `OUT.TXT`. Checking for the lowercase name makes a successful run
   look like a failure. This produced a false "the commands did not run"
   conclusion before the uppercase names were noticed.
4. **Dummy video means no display access.** Do not use this path for anything
   that needs a screenshot, video recording, or visible screen output.

## 2. Maximum emulation speed

The working config `harness/sdk-scratch/dosbox.conf` pins a fixed cycle count
(`cycles=3000`, `core=normal`), which is slow for batch work. (The stock default
is `cycles=auto`, which guesses; for a batch tool that is neither predictable
nor as fast as `max`.) Maximum speed is two settings:

```ini
[cpu]
core=dynamic
cputype=auto
cycles=max
```

The comments in DOSBox's default config (`~/.dosbox/dosbox-0.74-3.conf`)
document each one:

* `core`: "auto will switch to dynamic if available and appropriate." The
  dynamic core is the recompiler.
* `cputype`: "auto is the fastest choice."
* `cycles`: "'max' will allocate as much cycles as your computer is able to
  handle."

Two ways to apply it.

**With a config file.** Pass an override after the base config; **later `-conf`
files win** (verified):

```sh
dosbox -conf harness/sdk-scratch/dosbox.conf -conf maxspeed.conf ...
```

**Without a file.** DOSBox 0.74-3 has an internal `CYCLES` command, so `-c`
works too (verified — it moves the benchmark below from the fixed-3000 time to
the max time):

```sh
dosbox -conf harness/sdk-scratch/dosbox.conf -c "cycles max" ...
```

Use the config file for repeatable scripted runs; `-c "cycles max"` is fine for
one-offs. Other useful batch settings:

```ini
[mixer]
nosound=true

[midi]
mpu401=none
mididevice=none
```

`nosound=true` alone still makes DOSBox probe ALSA for MIDI (`ALSA:Can't
subscribe to MIDI port ...`, `MIDI:Opened device:none`); the two `[midi]` keys
stop that.

## 3. Measurements

Benchmark: a `.COM` with a nested loop (`mov dx,0x100` / `mov cx,0xffff` /
`loop $` / `dec dx` / `jnz` / `int 20h`), ≈16.8 M instructions. Each setting was
run twice; wall time includes ≈0.93 s of DOSBox start-up (measured with an
empty `int 20h` program, 0.95 s / 0.91 s).

| setting | run 1 | run 2 | loop time ≈ |
|---|---|---|---|
| `cycles=fixed 3000`, `core=normal` (the scratch config) | 6.61 s | 6.49 s | 5.6 s |
| `cycles=max`, `core=normal` | 2.00 s | 2.11 s | 1.1 s |
| `cycles=max`, `core=dynamic` | 1.75 s | 1.72 s | 0.8 s |
| `cycles=max`, `core=dynamic`, `frameskip=10` | 1.69 s | 1.73 s | 0.8 s |

* Max + dynamic is about **3.8× faster end to end**, and about **7× faster on
  the loop itself**, than the fixed-3000 config.
* The fixed-3000 run retires ≈3.0 M instructions/s, which matches the config's
  "instructions ... each millisecond": the benchmark is behaving as expected.
* `frameskip=10` made **no measurable difference** with dummy video. Rendering
  is not the bottleneck here; do not expect a gain from it.
* `core=normal` at `cycles=max` is close on this pure-loop benchmark (2.0 s vs
  1.7 s), but the dynamic core is the right choice for real code.

## 4. Caveats

* `cycles=max` consumes all the host CPU it can. Run one instance at a time;
  do not parallelise batch jobs by launching several `cycles=max` DOSBoxes
  unless you measure that it helps.
* Max speed is not cycle-accurate. Fix the cycle count when timing matters
  (for example when measuring 34010 code under the simulator), and use
  `cycles=max` only when throughput matters, as it does for assembly/linking.
* `ALT-F12` ("Unlock speed (turbo button)") and `CTRL-F11`/`CTRL-F12` change
  speed interactively, per `man dosbox`; they are useless in a headless run,
  which is why the settings above are config/`-c` based.