Files
vt1200/harness/udpstream
arti f251672d5d udpstream: payload sends and receives raw Ethernet with its own LANCE driver
lance_bcast.c drives the chip entirely on its own -- init block, PADR/LADRF,
eight TX and eight RX descriptors, INIT/IDON/STRT, TDMD, completion polling --
and test-bcast.sh runs it in MAME and reports:

  TXD=6  RXF=5  ET=0x88B5  source MAC 0xC6FC  ok=1  PASS

The tap capture separates the directions: six 60-byte 0x88b5 broadcasts from
08:00:2b:16:4b:5a (our payload) and 49 from the host. RXF counts host frames
(early stop at five) and the recorded source MAC is the host's.

Fixes behind it: per-frame TX descriptor (the chip advances its own ring
position), cfg-net needed for a tap to exist at all, pkill -x instead of -f,
and two bit-vs-byte addressing bugs.
2026-10-30 16:21:02 +02:00
..