Werner Almesberger
eaa11b110c
fw/: sample the acceleration sensor (untested)
2012-06-21 08:56:56 -03:00
Werner Almesberger
7045109090
fw/accel.c: keep track of uptime and return it with uptime() (untested)
2012-06-21 08:56:41 -03:00
Werner Almesberger
2bac5e74a7
fw/image.c (image_first): call image_more to process the payload
...
This makes things work also for zero-sized files. I.e.,
./antorcha /dev/null
does precisely what one would expect. (Before, the transfer was
accepted, but the first salt block became the new image.)
2012-06-20 18:39:29 -03:00
Werner Almesberger
2011c515c8
fw/: pass limit also to "first" function of protocol handlers
2012-06-20 18:37:13 -03:00
Werner Almesberger
c6fc8190de
fw/image.c: fix use of hash functions; make image pointer setup more readable
...
It was almost impossible NOT to read
next_image = p = image == images[0] ? ...
^^^^
as if it was
next_image = p = image = images[0] ? ...
^^^
2012-06-20 16:51:40 -03:00
Werner Almesberger
1668e702e5
fw/dispatch.c: fix initial sequence number; some cleanup
2012-06-20 16:50:55 -03:00
Werner Almesberger
ab00d8e231
fw/antorcha.c: don't overrun image by one line in test mode
2012-06-20 16:48:16 -03:00
Werner Almesberger
b7d80f1340
fw/fw.c: simplify the use of the sequence number a little (untested)
...
Not sure if this even produces better code. It looks a bit cleaner, though.
2012-06-20 16:46:27 -03:00
Werner Almesberger
6286aa9bbc
fw/sweep.c: use ICR1 instead of double-buffered OCR1A; set pixel_ticks
...
Our timing is now accurate within a measured 0.5% on the test device,
which is well within the specified 1% of the calibrated RC oscillator.
2012-06-20 16:40:33 -03:00
Werner Almesberger
ea2cd37c04
properly implement "ping" and invoke it with antorcha -P
2012-06-20 11:31:56 -03:00
Werner Almesberger
9bc9c57fb2
fw/: simple image test mode (still untested)
2012-06-20 10:41:27 -03:00
Werner Almesberger
87cc67d5f7
fw/: add image data upload (completely untested)
2012-06-20 10:30:40 -03:00
Werner Almesberger
6223a58552
fw/: move image data from sweep.[ch] to new image.[ch]
2012-06-20 07:45:04 -03:00
Werner Almesberger
7003c9c35b
fw/: added image sweep (completely untested)
2012-06-20 07:39:24 -03:00
Werner Almesberger
3c4855deff
fw/Makefile: cleanup
...
Remove references to a reset-secret, removed remote control via
programming interface.
2012-06-18 20:37:51 -03:00
Werner Almesberger
cc4b5607c7
RESET protocol to jump from application to boot loader without power cycling
2012-06-18 20:31:20 -03:00
Werner Almesberger
683056bca7
fw/Makefile: generate random unlock secret (from /dev/urandom)
2012-06-18 19:26:25 -03:00
Werner Almesberger
332f8aceb6
add ben-wpan to include search paths, for at86rf230.h
2012-06-18 19:24:12 -03:00
Werner Almesberger
89b10939f9
make firmware upload protocol less secure but lean; boot loader works
2012-06-18 18:22:56 -03:00
Werner Almesberger
56476539cf
fw/: addition of boot loader (WIP) and assorted cleanup and improvements
...
The boot loader currently uses the protocol switch intended for the
application. This makes it too big to fit in the very limiting
constraints the ATmega168 poses - and there's not even cryptographic
authentication yet. We'll have to dumb it down quite a bit.
2012-06-18 10:56:43 -03:00
Werner Almesberger
df6ceb8394
fw/: first version of experimental firmware
2012-06-16 22:16:37 -03:00
