Werner Almesberger 206eb4d591 clean up diagnostic more and make it more robust ... A number of changes: - don't enable interrupts, since they often cause hangs (not sure why) - remove GND measurement - wait 100 us between AMUX setup and start of conversion, to let input settle - reduce delay between line setup and samping from 100 ms to 50 ms, for this is already sufficient		2012-07-01 19:40:01 -03:00
..
accel.c	clean up diagnostic more and make it more robust	2012-07-01 19:40:01 -03:00
accel.h	clean up diagnostic more and make it more robust	2012-07-01 19:40:01 -03:00
antorcha.c	fw/: add DIAG protocol (supply voltage measurement, for diagnostics)	2012-07-01 10:43:37 -03:00
boot.c	RESET protocol to jump from application to boot loader without power cycling	2012-06-18 20:31:20 -03:00
diag.c	clean up diagnostic more and make it more robust	2012-07-01 19:40:01 -03:00
dispatch.c	fw/: pass limit also to "first" function of protocol handlers	2012-06-20 18:37:13 -03:00
dispatch.h	fw/: add DIAG protocol (supply voltage measurement, for diagnostics)	2012-07-01 10:43:37 -03:00
flash.c	make firmware upload protocol less secure but lean; boot loader works	2012-06-18 18:22:56 -03:00
flash.h	make firmware upload protocol less secure but lean; boot loader works	2012-06-18 18:22:56 -03:00
fw.c	fw/fw.c: simplify the use of the sequence number a little (untested)	2012-06-20 16:46:27 -03:00
fw.h	make firmware upload protocol less secure but lean; boot loader works	2012-06-18 18:22:56 -03:00
hash.c	fw/hash.h: only #include avr/pgmspace.h when building for AVR (and not for host)	2012-06-29 15:24:13 -03:00
hash.h	fw/hash.[ch]: new function hash_merge_progmem to read from Flash instead of RAM	2012-06-23 11:59:47 -03:00
image.c	fw/image.c (localize_line): export line format conversion function	2012-07-01 10:20:33 -03:00
image.h	fw/image.c (localize_line): export line format conversion function	2012-07-01 10:20:33 -03:00
io.h	fw/: sample the acceleration sensor (untested)	2012-06-21 08:56:56 -03:00
Makefile	fw/: add DIAG protocol (supply voltage measurement, for diagnostics)	2012-07-01 10:43:37 -03:00
param.c	fw/: move secrets to secret.c; rename reset secret to maintenance secret	2012-07-01 10:08:50 -03:00
param.h	fw/: add parameter upload (untested), move parameters from antorcha.c to param.c	2012-06-27 02:36:08 -03:00
proto.h	fw/diag.c: fix and improve DIAG function	2012-07-01 11:53:51 -03:00
reset.c	fw/: move secrets to secret.c; rename reset secret to maintenance secret	2012-07-01 10:08:50 -03:00
rf.c	fw/rf.c (rf_send): increase delay from 2 ms to 9 ms, for slow atben	2012-06-29 10:26:25 -03:00
rf.h	fw/: first version of experimental firmware	2012-06-16 22:16:37 -03:00
sample.c	fw/sample.c (handler): set the time in samples (was set to zero, for debugging)	2012-06-21 19:16:55 -03:00
secret.c	fw/: move secrets to secret.c; rename reset secret to maintenance secret	2012-07-01 10:08:50 -03:00
secret.h	fw/: move secrets to secret.c; rename reset secret to maintenance secret	2012-07-01 10:08:50 -03:00
spi.c	fw/spi.c: explain why we probably can't reach fosc/2 = 4 MHz	2012-06-23 14:54:31 -03:00
spi.h	fw/: addition of boot loader (WIP) and assorted cleanup and improvements	2012-06-18 10:56:43 -03:00
sweep.c	fw/sweep.c (set_line): export line setting (output on LEDs) function	2012-07-01 10:24:18 -03:00
sweep.h	fw/sweep.c (set_line): export line setting (output on LEDs) function	2012-07-01 10:24:18 -03:00
version.h	fw/: first version of experimental firmware	2012-06-16 22:16:37 -03:00