qi-hardware/antorcha
1
0
Fork 0
mirror of git://projects.qi-hardware.com/antorcha.git synced 2024-12-22 22:55:31 +02:00
Code
Antorcha, LED-based signal device (for viewing from up to ~50 m) http://projects.qi-hardware.com/index.php/p/antorcha/
82 Commits 2 Branches 0 Tags 429 KiB
C 83.5%
Makefile 10.7%
Shell 3.5%
Perl 2.3%
a924364311
Go to file
Werner Almesberger a924364311 fw/rf.c (rf_send): increase delay from 2 ms to 9 ms, for slow atben 
Not sure why the Ben exhibited such a long turn-around time. It should
actually be faster than a PC with atusb. Maybe it's because of latency
introduced by other sources.
2012-06-29 10:26:25 -03:00
components Initial commit 2012-06-11 22:18:21 -03:00
doc try cleaner sweep synchronization algorithm 2012-06-25 10:48:19 -03:00
fw fw/rf.c (rf_send): increase delay from 2 ms to 9 ms, for slow atben 2012-06-29 10:26:25 -03:00
hw hw/: pull SLP_TR down, not up 2012-06-16 10:27:31 -03:00
tools tools/bit2ant: renamed to xbm2ant 2012-06-28 16:36:14 -03:00
BOOKSHELF Initial commit 2012-06-11 22:18:21 -03:00
Makefile Initial commit 2012-06-11 22:18:21 -03:00
README README: explain directory placement and avrdude.conf entry 2012-06-18 20:49:11 -03:00

README 

Antorcha - A LED-based signal device
====================================

...


Directory placement
-------------------

Antorcha makes extensive use of libraries and header of the ben-wpan
project. For this, the top-level directory of the ben-wpan project must
be in the same directory as the top-level directory of Antorcha. E.g.,

/home/qi/ben-wpan/
/home/qi/antorcha/


/etc/avrdude.conf entry
-----------------------

Antorcha uses the atusb programming adapter from the ben-wpan project.
Since the pin positions of MISO and MOSI are swapped between ATmega32U2
and the ATmega168, the following entry is needed in avrdude.conf (which
is the same as the entry for nanonote_atusb except that the pin numbers
for mosi and miso are swapped):

programmer
  id	= "nanonote_antorcha";
  desc	= "NanoNote 8:10 card adapter for ATUSB";
  type	= nanonote;
  reset	= 1;
  sck	= 8;
  mosi	= 6;
  miso	= 7;
  pgmled = 2;
;