Werner Almesberger
653910b64b
ubb-patgen/table/mktab: make the long vertical axes thinner
...
Looks a bit less old-fashioned that way.
2013-01-15 16:45:08 -03:00
Werner Almesberger
3c9443294d
ubb-patgen/table/: generate a PNG with a table of MMC bus clock frequencies
2013-01-15 16:14:48 -03:00
Werner Almesberger
1aedd4b57b
ubb-patgen/ubb-patgen.c: option -q when dumping frequencies suppressed details
...
... and avoids pretty-printing.
2013-01-15 16:10:14 -03:00
Werner Almesberger
eedb0f0106
ubb-patgen/ubb-patgen.c: "ubb-patgen -f FREQ" calculates the frequency
...
This can then be used by generators to generate an oversampled pattern.
2013-01-15 14:42:00 -03:00
Werner Almesberger
1111156a97
ubb-patgen/ubb-patgen.c: remove pattern frequency and use -f for bus clock
...
Let's leave fancy oversampling calculations to the user.
2013-01-15 14:24:00 -03:00
Werner Almesberger
6e6767175f
ubb-patgen/ubb-patgen.c: clean up usage (-c selects clkout only; -C to monitor)
...
... and active_s is no longer used with a pattern.
2013-01-15 14:08:38 -03:00
Werner Almesberger
a5fbf55419
ubb-patgen/ubb-patgen.c: clean up section structure
2013-01-15 13:02:19 -03:00
Werner Almesberger
dad97398d3
ubb-patgen/ubb-patgen.c (dma_pattern): mlockall (before address translation and DMA)
2013-01-14 23:32:37 -03:00
Werner Almesberger
c6306ff591
ubb-patgen/ubb-patgen.c: DMA works now. Get rid of the PIO option.
2013-01-14 23:29:23 -03:00
Werner Almesberger
b6ee672266
ubb-patgen/: flush dcache and write buffer before doing DMA
2013-01-14 23:26:24 -03:00
Werner Almesberger
908b0631d1
ubb-patgen/ubb-patgen.c: DMA has mystery glitches. Use PIO for now.
2013-01-14 22:18:46 -03:00
Werner Almesberger
3febc9072a
ubb-patgen/ubb-patgen.c (dma_pattern): move pattern parser to parse_pattern
...
... and introduce pattern multipliers <hex>{<repetitions>}
2013-01-14 19:26:15 -03:00
Werner Almesberger
e5cb1c98ea
ubb-patgen/ubb-patgen.c: describe the pattern transfer logic
2013-01-14 17:01:13 -03:00
Werner Almesberger
fa8b5b6324
ubb-patgen/ubb-patgen.c: clean up pattern generation and boundaries
...
The main change is to use only a single transfer and thus avoid tri-stating
DATx during the command phase. To control the timing, we put the first word
"manually" into the FIFO, wait until it has been sent on the bus, and only
then DMA the rest.
2013-01-14 17:01:01 -03:00
Werner Almesberger
09bf9c23ab
ubb-patgen/: add DMA-based pattern transfer (WIP)
...
Works for some patterns but seems to have issues at the edge of
transfers. Clock selection also needs more work.
2013-01-14 03:55:51 -03:00
Werner Almesberger
47140384ee
ubb-patgen/hw/: a simple resistor on CMD is sufficient - no need for a cap
...
Cheaper and easier to control.
2013-01-14 03:11:39 -03:00
Werner Almesberger
52ce1947c5
ubb-patgen/: UBB-based pattern generator (WIP)
...
For now, it only knows to synthesize the clock and to output it.
2013-01-07 17:01:51 -03:00
Werner Almesberger
7c1f06530d
ubb-patgen/hw/labels.fig: cut-out labels for the wires
2013-01-07 17:01:17 -03:00
Werner Almesberger
ed91f621e5
ubb-patgen/hw/: schematics of a pattern generator based on UBB
2013-01-07 17:00:28 -03:00
