ben-wpan/atusb/fw/include/at86rf230.h

/*
 * include/at86rf230.h - AT86RF230 protocol and register definitions
 *
 * Written 2008-2010 by Werner Almesberger
 * Copyright 2008-2010 Werner Almesberger
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 */


#ifndef AT86RF230_H
#define	AT86RF230_H

enum {
	AT86RF230_REG_WRITE	= 0xc0, /* 11... */
	AT86RF230_REG_READ	= 0x80,	/* 10... */
	AT86RF230_BUF_WRITE	= 0x60,	/* 011... */
	AT86RF230_BUF_READ	= 0x20,	/* 001... */
	AT86RF230_SRAM_WRITE	= 0x40,	/* 010... */
	AT86RF230_SRAM_READ	= 0x00 	/* 000... */
};

#define	MAX_PSDU	127	/* octets, see AT86RF230 manual section 8.1  */
#define	SRAM_SIZE	128


/* --- Registers ----------------------------------------------------------- */

enum {
	REG_TRX_STATUS		= 0x01,
	REG_TRX_STATE		= 0x02,
	REG_TRX_CTRL_0		= 0x03,

	REG_PHY_TX_PWR		= 0x05,
	REG_PHY_RSSI		= 0x06,
	REG_PHY_ED_LEVEL	= 0x07,
	REG_PHY_CC_CCA		= 0x08,
	REG_CCA_THRES		= 0x09,

	REG_IRQ_MASK		= 0x0e,
	REG_IRQ_STATUS		= 0x0f,
	REG_VREG_CTRL		= 0x10,
	REG_BATMON		= 0x10,
	REG_XOSC_CTRL		= 0x12,

	REG_PLL_CF		= 0x1a,
	REL_PLL_DCU		= 0x1b,
	REG_PART_NUM		= 0x1c,
	REG_VERSION_NUM		= 0x1d,
	REG_MAN_ID_0		= 0x1e,
	REG_MAN_ID_1		= 0x1f,
	REG_SHORT_ADDR_0	= 0x20,
	REG_SHORT_ADDR_1	= 0x21,
	REG_PAN_ID_0		= 0x22,
	REG_PAN_ID_1		= 0x23,
	REG_IEEE_ADDR_0		= 0x24,
	REG_IEEE_ADDR_1		= 0x25,
	REG_IEEE_ADDR_2		= 0x26,
	REG_IEEE_ADDR_3		= 0x27,
	REG_IEEE_ADDR_4		= 0x28,
	REG_IEEE_ADDR_5		= 0x29,
	REG_IEEE_ADDR_6		= 0x2a,
	REG_IEEE_ADDR_7		= 0x2b,
	REG_XAH_CTRL		= 0x2c,
	REG_CSMA_SEED_0		= 0x2d,
	REG_CSMA_SEED_1		= 0x2e,
};

/* --- TRX_STATUS [7] ------------------------------------------------------ */

#define	CCA_DONE	(1 << 7)

/* --- TRX_STATUS [6] ------------------------------------------------------ */

#define	CCA_STATUS	(1 << 6)

/* --- TRX_STATUS [4:0] ---------------------------------------------------- */

#define	TRX_STATUS_SHIFT	0
#define	TRX_STATUS_MASK		0x0f

enum {
	TRX_STATUS_P_ON			= 0x00,	/* reset default */
	TRX_STATUS_BUSY_RX		= 0x01,
	TRX_STATUS_BUSY_TX		= 0x02,
	TRX_STATUS_RX_ON		= 0x06,
	TRX_STATUS_TRX_OFF		= 0x08,
	TRX_STATUS_PLL_ON		= 0x09,
	TRX_STATUS_SLEEP		= 0x0f,
	TRX_STATUS_BUSY_RX_AACK		= 0x11,
	TRX_STATUS_BUSY_TX_ARET		= 0x12,
	TRX_STATUS_RX_AACK_ON		= 0x16,
	TRX_STATUS_TX_ARET_ON		= 0x19,
	TRX_STATUS_RX_ON_NOCLK		= 0x1c,
	TRX_STATUS_RX_AACK_ON_NOCLK	= 0x1d,
	TRX_STATUS_BUSY_RX_AACK_NOCLK	= 0x1e,
	TRX_STATUS_TRANSITION		= 0x1f
};

/* --- TRX_STATE [7:5] ----------------------------------------------------- */

#define	TRAC_STATUS_SHIFT	5
#define	TRAC_STATUS_MASK	7

enum {
	TRAC_STATUS_SUCCESS			= 0,	/* reset default */
	TRAC_STATUS_SUCCESS_DATA_PENDING	= 1,
	TRAC_STATUS_CHANNEL_ACCESS_FAILURE	= 3,
	TRAC_STATUS_NO_ACK			= 5,
	TRAC_STATUS_INVALID			= 7
};

/* --- TRX_CMD [4:0] ----------------------------------------------------- */

#define	TRX_CMD_SHIFT	0
#define	TRX_CMD_MASK	7

enum {
	TRX_CMD_NOP		= 0x00,	/* reset default */
	TRX_CMD_TX_START	= 0x02,
	TRX_CMD_FORCE_TRX_OFF	= 0x03,
	TRX_CMD_RX_ON		= 0x06,
	TRX_CMD_TRX_OFF		= 0x08,
	TRX_CMD_PLL_ON		= 0x09,
	TRX_CMD_RX_AACK_ON	= 0x16,
	TRX_CMD_TX_ARET_ON	= 0x19,
};

/* --- TRX_CTRL_0 [7:6] ---------------------------------------------------- */

#define	PAD_IO_SHIFT	6
#define	PAD_IO_MASK	3

enum {
	PAD_IO_2mA,	/* reset default */
	PAD_IO_4mA,
	PAD_IO_6mA,
	PAD_IO_8mA
};

/* --- TRX_CTRL_0 [5:4] ---------------------------------------------------- */

#define	PAD_IO_CLKM_SHIFT	4
#define	PAD_IO_CLKM_MASK	3

enum {
	PAD_IO_CLKM_2mA,
	PAD_IO_CLKM_4mA,	/* reset default */
	PAD_IO_CLKM_5mA,
	PAD_IO_CLKM_8mA,
};

/* --- TRX_CTRL_0 [3] ------------------------------------------------------ */

#define	CLKM_SHA_SEL		(1 << 3)

/* --- TRX_CTRL_0 [2:0] ---------------------------------------------------- */

#define	CLKM_CTRL_SHIFT	0
#define	CLKM_CTRL_MASK	3

enum {
	CLKM_CTRL_OFF	= 0,
	CLKM_CTRL_1MHz	= 1,	/* reset default */
	CLKM_CTRL_2MHz	= 2,
	CLKM_CTRL_4MHz	= 3,
	CLKM_CTRL_8MHz	= 4,
	CLKM_CTRL_16MHz	= 5
};

/* --- PHY_TX_PWR [7] ------------------------------------------------------ */

#define	TX_AUTO_CRC_ON	(1 << 7)

/* --- PHY_TX_PWR [3:0] ---------------------------------------------------- */

#define	TX_PWR_SHIFT	0
#define	TX_PWR_MASK	0x0f

/* --- PHY_RSSI [7] -------------------------------------------------------- */

#define	RX_CRC_VALID	(1 << 7)

/* --- PHY_RSSI [4:0] ------------------------------------------------------ */

#define	RSSI_SHIFT	0
#define	RSSI_MASK	0x1f

/* --- PHY_CC_CCA [7] ------------------------------------------------------ */

#define	CCA_REQUEST	(1 << 7)

/* --- PHY_CC_CCA [6:5] ---------------------------------------------------- */

#define	CCA_MODE_SHIFT	5
#define	CCA_MODE_MASK	3

/* --- PHY_CC_CCA [4:0] ---------------------------------------------------- */

#define	CHANNEL_SHIFT	0
#define	CHANNEL_MASK	0x1f

/* --- CCA_THRES [3:0] ----------------------------------------------------- */

#define	CCA_ED_THRES_SHIFT	0
#define	CCA_ED_THRES_MASK	0x0f

/* --- IRQ_MASK/IRQ_STATUS ------------------------------------------------- */

enum {
	IRQ_PLL_LOCK	= 1 << 0,
	IRQ_PLL_UNLOCK	= 1 << 1,
	IRQ_RX_START	= 1 << 2,
	IRQ_TRX_END	= 1 << 3,
	IRQ_TRX_UR	= 1 << 6,
	IRQ_BAT_LOW	= 1 << 7
};

/* --- VREG_CTRL [7, 6, 3, 2] ---------------------------------------------- */

#define	AVREG_EXT	(1 << 7)
#define	AVDD_OK		(1 << 6)
#define	DVREG_EXT	(1 << 3)
#define	DVDD_OK		(1 << 2)

/* --- BATMON [5, 4] ------------------------------------------------------- */

#define	BATMON_OK	(1 << 5)
#define	BATMON_HR	(1 << 4)

/* --- BATMON [3:0] -------------------------------------------------------- */

#define	NATMON_VTH_SHIFT	0
#define	NATMON_VTH_MASK		0x0f

/* --- XOSC_CTRL [7:4] ----------------------------------------------------- */

#define	XTAL_MODE_SHIFT	4
#define	XTAL_MODE_MASK	0x0f

enum {
	XTAL_MODE_OFF	= 0x0,
	XTAL_MODE_EXT	= 0x4,
	XTAL_MODE_INT	= 0xf	/* reset default */
};

/* --- XOSC_CTRL [3:1] ----------------------------------------------------- */

#define	XTAL_TRIM_SHIFT	4
#define	XTAL_TRIM_MASK	0x0f

/* --- XAH_CTRL [7:4] ------------------------------------------------------ */

#define	MAX_FRAME_RETRIES_SHIFT	4
#define	MAX_FRAME_RETRIES_MASK	0x0f
#define	MAX_CSMA_RETRIES_SHIFT	1
#define	MAX_CSMA_RETRIES_MASK	0x07

/* --- PLL_CF [7] ---------------------------------------------------------- */

#define	PLL_CF_START	(1 << 7)

/* --- PLL_DCU [8] --------------------------------------------------------- */

#define	PLL_DCU_START	(1 << 7)

/* --- CSMA_SEED_1 [7:6] --------------------------------------------------- */

#define	MIN_BE_SHIFT		6
#define	MIN_BE_MASK		3

/* --- CSMA_SEED_1 [5] ----------------------------------------------------- */

#define	AACK_SET_PD		(1 << 5)

/* --- CSMA_SEED_1 [3] ----------------------------------------------------- */

#define	I_AM_COORD		(1 << 3)

/* --- CSMA_SEED_1 [2:0] --------------------------------------------------- */

#define CSMA_SEED_1_SHIFT	0
#define	CSMA_SEED_1_MASK	7

#endif /* !AT86RF230_H */