mirror of
git://projects.qi-hardware.com/ben-wpan.git
synced 2024-12-23 10:44:35 +02:00
prod/doc/flash.html: described the flashing process
This commit is contained in:
parent
e9d65fbfd3
commit
6adfd4b1fd
@ -11,7 +11,7 @@ of the following two parts:
|
||||
<LI>The application (via DFU, using <B>dfu-util</B>)
|
||||
</OL>
|
||||
<P>
|
||||
Note that <B>atben</B> has no microcontroller and there does not need
|
||||
Note that <B>atben</B> has no microcontroller and therefore does not need
|
||||
any flashing.
|
||||
|
||||
|
||||
@ -21,9 +21,33 @@ any flashing.
|
||||
|
||||
<H2>Flashing the boot loader</H2>
|
||||
|
||||
The following image shows the setup for flashing the boot loader:
|
||||
<P>
|
||||
<IMG src="setup-C.png">
|
||||
<P>
|
||||
To flash the boot loader,
|
||||
<UL>
|
||||
<LI>insert the <B>atusb-pgm</B> board into the Ben
|
||||
<LI>place the <B>atusb</B> board (DUT) on the table near the Ben,
|
||||
without connecting it to USB
|
||||
<LI>place <B>atusb-pgm</B> onto <B>atusb</B> as shown in the image below
|
||||
and gently push it on the contacts
|
||||
<P>
|
||||
<A href="http://downloads.qi-hardware.com/people/werner/wpan/tmp/atusb-programming.jpg"><IMG
|
||||
src="http://downloads.qi-hardware.com/people/werner/wpan/tmp/atusb-programming.jpg"
|
||||
width="250"></A>
|
||||
<P>
|
||||
<LI>finally, run
|
||||
<PRE>
|
||||
make flash
|
||||
</PRE>
|
||||
</UL>
|
||||
<P>
|
||||
The flashing takes about 20-30 seconds. If it should fail, make sure you
|
||||
properly placed <B>atusb-pgm</B> and try again. If it keeps on failing,
|
||||
remove <B>atusb-pgm</B> from the Ben and insert it again.
|
||||
If flashing fails despite numerous attempts, proceed to the
|
||||
<A href="analysis.html">fault analysis</A>.
|
||||
|
||||
|
||||
<!-- ====================================================================== -->
|
||||
@ -31,9 +55,19 @@ any flashing.
|
||||
|
||||
<H2>Flashing the application</H2>
|
||||
|
||||
The flashing script proceeds automatically to the flashing of the
|
||||
application. All you need to do is insert the <B>atusb</B> board
|
||||
into the PC:
|
||||
<P>
|
||||
<IMG src="setup-D.png">
|
||||
<P>
|
||||
The flashing script will wait up to 30 seconds for enumeration.
|
||||
Once the <B>atusb</B> board has been detected, the script transfers
|
||||
the application with DFU. After this, you can proceed with the
|
||||
<A href="test.html">functional test</A>.
|
||||
<P>
|
||||
If the board fails to enumerate, proceed with the
|
||||
<A href="analysis.html">fault analysis</A>.
|
||||
|
||||
<P>
|
||||
<HR>
|
||||
|
Loading…
Reference in New Issue
Block a user